MCR Safety 92721S CutPro A4 Polyurethane Gloves — Small Review (2026)
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. We stock this product; commissions do not influence our review.
★★★★½ 4.5/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | MCR Safety |
|---|---|
| Category | Cut Resistant Gloves |
| Typical price | $13.99 |
| Model / SKU | 92721S |
The MCR Safety 92721S CutPro A4 Polyurethane Gloves — Small is a cut resistant gloves from MCR Safety, stocked at $13.99. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.
What the Product Page Documents
The MCR Safety 92721S CutPro A4 Polyurethane Gloves in Small deliver ANSI/ISEA 105 A4 cut resistance in one of the thinnest, most dexterous knit constructions available in the industrial safety market. Built on a 21-gauge HyperMax HPPE shell — the finest gauge in MCR Safety's CutPro lineup — SKU 92721S is the optimal choice for workers who handle sharp materials at high velocity while needing fingertip sensitivity for precision tasks. The smooth polyurethane palm coating provides clean, accurate grip for electronics assembly, precision machining, light metal fabrication, and quality control inspection operations where glove bulk is simply not an option.
Gauge is one of the most important and least understood specifications in cut-resistant glove selection. Gauge refers to the number of stitches per inch in the knit shell — higher gauges produce finer, denser knits with thinner profiles. The 92721S is knit at 21 gauge, which is significantly finer than the 13-gauge and 15-gauge shells common in the broader cut-resistant glove market. The result is a glove that feels nearly like a second skin, allowing workers to handle small components, read part numbers, operate precision instruments, and manipulate fine hardware without removing their hand protection.
The A4 cut resistance rating means the 92721S withstands blade forces between 1,500 and 2,199 grams — sufficient protection for the majority of light manufacturing, electronics, and assembly environments that involve utility knife cuts, sheet metal edges, glass fibers, and carbon fiber handling. For facilities that previously used either no glove or a standard general-purpose work glove for these tasks, upgrading to the 92721S represents a meaningful reduction in laceration risk without any sacrifice in worker productivity.
Where It Earns Its Slot
Where it earns its slot: The MCR Safety 92721S CutPro A4 Polyurethane Gloves in Small deliver ANSI/ISEA 105 A4 cut resistance in one of the thinnest, most dexterous knit constructions available in the industrial safety market. Built on a 21-gaug… The product page carries the full documented configuration; this review deliberately restates rather than embellishes it — claims beyond the listing don't appear here.
Honest Limits
Its honest limits: like every hand protection product, it protects within its stated ratings and use lane only — the family FAQ below draws those boundaries, and the guides linked underneath rank it against its true alternatives. Where the listing is silent on a spec, so are we; verify markings and instructions on arrival.
Pros and Cons
Pros
- Documented cut resistant gloves from MCR Safety
- Model 92721S — traceable part number
- Listing-grounded specs — nothing invented here
Cons
- Configuration options live on the linked listing
- Where the listing is silent on a rating, verify the physical markings
Alternatives in the Same Lane
- SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
- MCR Safety PD6901 Predator Impact Gloves
- MCR Safety PD4900 Predator Impact Gloves
- MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
- MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
- MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
- MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
- MCR Safety PD4971 Predator Impact Gloves
- MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im
Hand Protection Guides
- Cut-Resistant Gloves Complete Guide
- Best Cut-Resistant Gloves
- Best Impact-Resistant Gloves
- Nitrile Gloves Complete Guide
- Best Mechanics Gloves
Browse by Category
- Cut-Resistant Gloves
- Impact-Resistant Gloves
- Nitrile Gloves
- Leather Work Gloves
- Chemical-Resistant Gloves
- Mechanics Gloves
Frequently Asked Questions
How much does the MCR Safety 92721S CutPro A4 Polyurethane Gloves — Small cost?
$13.99 at the linked listing — prices track the live page, and configuration choices there can shift the number.
What does the MCR Safety 92721S CutPro A4 Polyurethane Gloves — Small listing actually document?
The MCR Safety 92721S CutPro A4 Polyurethane Gloves in Small deliver ANSI/ISEA 105 A4 cut resistance in one of the thinnest, most dexterous knit constructions available in the industrial safety market. Built on a 21-gauge HyperMax HPPE shell — the finest gauge in MCR Safety's CutPro lineup — SKU 927…
What are the alternatives to the MCR Safety 92721S CutPro A4 Polyurethane Gloves — Small?
The sibling cut resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.
What do ANSI cut levels A1-A9 mean?
Grams of force a blade needs to cut through in standardized testing — A1 (200g) through A9 (6,000g+). Match the level to the hazard: A2-A4 covers general handling, A5+ for glass, sheet metal, and blades. The level on the listing is the level.
What does ANSI/ISEA 138 cover?
Back-of-hand impact protection, levels 1-3 — the standard behind rated impact gloves. TPR padding without a stated 138 level is comfort-tier protection; the reviews here keep that distinction explicit.
What does glove mil thickness mean?
One mil = 0.001 inch of film thickness on disposables. Thicker resists tears and lasts longer; thinner gives feel. Exam-grade 3-5 mil for light tasks, 6-8+ mil for shop duty — polymer choice still matters more than thickness.
Nitrile, latex, or vinyl — which disposable?
Nitrile for chemical splash and punctures (and latex allergies), latex for elasticity and feel where allergies permit, vinyl for cost-sensitive light tasks. The complete guide linked below runs the decision in full.
How do I size work gloves correctly?
Measure palm circumference and match the maker's chart — patterns differ across brands. Coated and cut-resistant knits should fit snug; a loose cut glove wrinkles and snags exactly where the blade lands.
When do coated work gloves get replaced?
When the coating wears through at fingertips or palm, when knit runs appear, or when embedded grime stiffens the shell. Coating breach on a cut-rated glove ends the rating where it matters most.
Can cut-resistant gloves be washed?
Most knit cut gloves take machine washing per their listing's care line — it extends life materially. Disposables never; coated gloves depend on the coating chemistry. Check the listed care instructions.
Are cut-resistant gloves puncture-proof?
No — cut resistance measures blade slicing, not needle puncture; hypodermic protection is a separate rating few gloves carry. Sharps handling needs gloves rated for the actual mechanism.
Do food tasks need special gloves?
Food-contact-safe marking on the listing is the gate — several cut-resistant and nitrile lines carry it for food processing. A shop glove without the marking stays out of the kitchen.
What does OSHA require for hand protection?
29 CFR 1910.138: gloves matched to the assessed hazard — cut, chemical, thermal, or general mechanical. The assessment picks the rating class; the listing's stated levels tell you whether a glove satisfies it.
Why do gloves come in dozens on some listings?
Consumable economics — coated and disposable gloves are bought by the dozen or case because替 rotation and replacement are the model. Per-pair math on the case price is the honest comparison.
Touchscreen compatibility — real or marketing?
Real where listed — conductive fingertip yarns work. The tradeoff is usually a thinner tip, which matters on cut-rated gloves; the listing states both or neither.
The Bottom Line
Rated 4.5/5 on documented spec, configuration, and value. The MCR Safety 92721S CutPro A4 Polyurethane Gloves — Small does the job its listing describes — the guides above tell you whether it's the right pick against the field.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates hand protection equipment for industrial and construction buyers.
How We Review
Hand-protection reviews restate ANSI/ISEA 105 cut levels, ANSI/ISEA 138 impact levels, and mil thicknesses exactly as each listing states them — never inferred from appearance or price. Where a listing claims no level, the review says so and treats the glove as unrated for that hazard. Ratings reflect documented spec, configuration, and value — the basis is stated, not invented testing.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Leave a comment