Ergodyne 7551 ProFlex Cut-Resistant Waterproof Winter Work Gloves, A5 Review (2026)

cut-resistant waterproof winter work gloves, a5 review: the short answer

Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The Ergodyne 7551 ProFlex Cut-Resistant Waterproof Winter Work Gloves, A5 is a safety gloves from Ergodyne, listed. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

The Ergodyne ProFlex 7551 Cut-Resistant Waterproof Winter Work Gloves combine ANSI/ISEA 105-2016 Level A5 cut resistance with full waterproof protection and fleece-lined winter insulation — providing cut-hazard protection, cold weather comfort, and wet-weather performance in a single glove for workers in outdoor and cold-storage operations with both sharp materials and cold or wet conditions. The 7551's 13-gauge HPPE (High Performance Polyethylene) fiber knit shell delivers A5-level cut resistance for applications involving glass, sheet metal, wire, and other sharp materials encountered in construction, utility, and manufacturing operations. The full latex waterproof exterior coating provides waterproof protection against water, sleet, and wet working conditions — keeping the hand warm and dry during outdoor winter operations or wet industrial environments. The brushed fleece lining delivers insulation and comfort against cold temperatures, making the 7551 appropriate for year-round outdoor work in cold climates and winter seasonal operations where workers handle sharp materials in cold, wet conditions. ANSI/ISEA 105-2016 Level A5 cut resistance represents a high cut protection level — above the A4 threshold and appropriate for moderate-to-high cut hazard operations where glass, metal, and wire handling requires protection beyond standard work gloves but where the full waterproof exterior and winter insulation of the 7551 also provide practical performance benefits the A5 cut-only gloves in lighter construction do not.

ANSI/ISEA 105-2016 cut resistance levels range from A1 (lowest) through A9 (highest), with each level requiring greater force to cut through the test specimen. A5-rated gloves like the 7551 address the mid-to-high cut hazard range — operations involving glass pane handling and installation, sheet metal fabrication and handling, automotive glass work, wire rope and cable operations, and manufacturing operations with sharp metal components where lower cut levels leave workers exposed to laceration risk from accidental contact with sharp edges. The 13g HPPE shell provides this cut protection at a relatively light and flexible construction compared to heavier engineered fiber gloves — maintaining dexterity for tasks requiring grip and feel alongside cut protection. The full latex waterproof exterior adds complete water exclusion without requiring a separate waterproof glove layer over the cut-resistant inner glove — simplifying layering and ensuring the cut protection function of the HPPE shell is not compromised by incompatible outer glove combinations. For operations in cold, wet conditions with A5-level cut hazards — glass work in wet weather, utility operations in winter, outdoor metal fabrication — the 7551 addresses all three requirements without the compromises of assembling separate cut, waterproof, and thermal protection components.

A5 cut resistance addresses glass, sheet metal, and wire hazards in a waterproof winter glove construction. Construction workers handling glass panes, utility workers working with wire and cable in winter, and outdoor fabrication workers contact sharp edges in cold, wet conditions — the 7551 provides the A5 cut protection level required for these hazards without requiring separate glove systems for cut, water, and cold protection.

Where It Earns Its Slot

Where it earns its slot: The Ergodyne ProFlex 7551 Cut-Resistant Waterproof Winter Work Gloves combine ANSI/ISEA 105-2016 Level A5 cut resistance with full waterproof protection and fleece-lined winter insulation — providing cut-hazard protectio. The sections below test that positioning against the documented configuration, not against wishful thinking.

Honest Limits

The ratings are task-specific and so are the limits: a cut level says nothing about chemical breakthrough, an abrasion score nothing about heat, and no glove rating survives the wrong size — a loose glove is a snag hazard and a tight one comes off. Match the marking to the assessed hazard, not to the biggest number.

Pros and Cons

Alternatives in the Same Lane

• SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
• MCR Safety PD6901 Predator Impact Gloves
• MCR Safety PD4900 Predator Impact Gloves
• MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
• MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
• MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
• MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
• MCR Safety PD4971 Predator Impact Gloves
• MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im

Hand Protection Guides

• Cut-Resistant Gloves Complete Guide
• Best Cut-Resistant Gloves
• Best Impact-Resistant Gloves
• Nitrile Gloves Complete Guide
• Best Mechanics Gloves

Browse by Category

• Cut-Resistant Gloves
• Impact-Resistant Gloves
• Nitrile Gloves
• Leather Work Gloves
• Chemical-Resistant Gloves
• Mechanics Gloves

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The Ergodyne 7551 ProFlex Cut-Resistant Waterproof Winter Work Gloves, A5 does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Primary sources for this page

The wording behind this page sits in OSHA 29 CFR 1910.138, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.

Why trust this page?

Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.

Methodology: how this page is maintained

Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.

More questions on this topic

How much does the Ergodyne 7551 ProFlex Cut-Resistant Waterproof Winter Work G cost?

at the linked listing — prices track the live page, and configuration choices there can shift the number.

What does the Ergodyne 7551 ProFlex Cut-Resistant Waterproof Winter Work G listing actually document?

The Ergodyne ProFlex 7551 Cut-Resistant Waterproof Winter Work Gloves combine ANSI/ISEA 105-2016 Level A5 cut resistance with full waterproof protection and fleece-lined winter insulation — providing cut-hazard protection, cold weather comfort, and wet-weather performance in a single glove for worke…

What are the alternatives to the Ergodyne 7551 ProFlex Cut-Resistant Waterproof Winter Work G?

The sibling safety gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.