MCR Safety FF2931-S Predator D3O A5 Cut-Resistant Mechanics Gloves — Small

The MCR Safety FF2931-S Predator D3O A5 Cut-Resistant Mechanics Gloves in Small extend the full capability of the Predator series — ANSI/ISEA 105 Level A5 cut resistance plus D3O certified smart-material impact protection — to workers with smaller hands who perform mechanical, assembly, and maintenance tasks. SKU FF2931-S is constructed on a HyperMax HPPE liner, features a synthetic leather palm, and integrates D3O impact pads precisely positioned over the knuckles and dorsal hand. The Small size, targeting hand circumferences of approximately 8 to 8.5 inches, ensures that smaller-handed workers in mechanics and maintenance roles are not forced to accept improperly sized gloves that compromise protection. Available at wcsafety.com for B2B program procurement.

Key Features

• ANSI/ISEA 105 Cut Level A5 — HyperMax HPPE liner at ≥1,500g TDM-100 cut resistance
• D3O certified impact protection — smart-material pads, knuckle and dorsal coverage
• Synthetic leather palm — secure grip and abrasion resistance for tool and part handling
• Breathable stretch back panel — full mobility and ventilation for extended use
• Hook-and-loop wrist closure — secure, adjustable fit at Small wrist dimensions
• Small size — fits hand circumference approximately 8–8.5 inches
• Pre-curved Small-pattern palm — proportionally graded for correct hand coverage
• D3O pad alignment sized for Small hand geometry — accurate impact zone coverage
• ANSI/ISEA 105 compliant for cut and impact across all sizes including Small

Detailed Description

Small is the most frequently overlooked size in industrial mechanics glove programs, yet it represents a genuine and growing portion of the workforce. Women entering automotive, aerospace, and precision manufacturing are the fastest-growing demographic in many industrial sectors, and Small is the most common glove size for adult women working in these fields. Additionally, a significant number of male workers — particularly in Asian, South Asian, and Central American demographic groups that make up substantial portions of the manufacturing workforce — wear Small gloves. PPE programs that stock only Large and X-Large systematically deny adequate protection to these workers.

The Predator FF2931-S maintains all technical specifications of the larger sizes in the series: the same HyperMax HPPE yarn composition and 13-gauge knit for A5 cut resistance, the same D3O smart-material compound in the impact pads, and the same synthetic leather palm material. What changes with size is the dimensional grading of each component — the liner pattern, palm panel dimensions, and D3O pad size and placement are all scaled to the Small hand geometry. This precision grading is what ensures the D3O pads actually cover the knuckle zone on a Small hand rather than sitting too far back toward the wrist as they would if a Medium-size pad were used in a Small glove body.

The D3O impact protection in the FF2931-S addresses injury patterns that are relevant to the types of tasks Small-size workers commonly perform. Precision assembly, aerospace component handling, and automotive bodywork involve frequent work in tight spaces where the dorsal hand is exposed to hard surfaces, edges, and fixtures. Small-handed workers in these environments are not immune to impact injury, yet they have historically been assigned either ill-fitting gloves with larger pads that do not align with their hand anatomy, or lightweight work gloves without meaningful impact protection. The FF2931-S closes this gap.

The synthetic leather palm on the FF2931-S is proportionally cut for a Small hand's palm dimensions, ensuring that the gripping surface covers the correct zones without excess material that would bunch in the palm and reduce tactile feedback. In precision manufacturing and inspection tasks, tactile feedback through the glove is a functional requirement — workers need to feel whether a component is seated correctly, whether a fastener has engaged threads, or whether a surface finish meets specification. A properly fitted palm panel preserves this sensitivity while providing the friction and abrasion resistance needed for tool handling.

The hook-and-loop wrist closure on the FF2931-S accommodates the narrower wrist circumferences typical of Small-hand workers. A properly adjusted closure is important not just for fit but for safety: a loose wrist on a mechanics glove can snag machinery and create entanglement hazards. For small-handed workers who may have been wearing Large gloves with loose wrist closures, the FF2931-S represents a meaningful improvement in both comfort and risk management.

Applications and Use Cases

• Aerospace assembly and precision manufacturing — small-hand demographics with A5 and D3O protection
• Automotive bodywork and detail assembly — proportionally correct glove for smaller-handed mechanics
• Women in mechanical and maintenance trades — properly fitted PPE that enables full performance
• Electronics manufacturing maintenance — cut and impact protection for fine-motor environments
• Medical device and laboratory equipment servicing — precision tool work with dorsal protection
• Facilities maintenance — general-purpose protection for workers in the Small size range
• Inclusive workforce PPE compliance — OSHA-compliant sizing for all workforce demographics
• Multi-trade contractors — Small size stocking for comprehensive crew-wide PPE programs

Specifications

Related Products

• Mechanics Gloves Including Small Sizes at WC Safety
• Impact-Resistant Gloves for Precision and Heavy Work
• ANSI A5 Cut-Resistant Gloves Across All Sizes
• Full MCR Safety Product Range
• Work Gloves for Diverse Industrial Applications
• Cut and Impact Combo Gloves for Mechanics

Frequently Asked Questions

Why is the Small size important in a mechanics glove program?

Small is the most overlooked size, yet it is required by many women in industrial trades and male workers with smaller hands. When Small-sized workers are given Large gloves, the excess material reduces grip control, dexterity, and cut protection effectiveness. The FF2931-S provides correctly fitted A5 and D3O protection for this workforce segment.

Are the D3O pads in the Small size in the correct position?

Yes. Pad dimensions and placement are proportionally scaled to Small hand geometry, ensuring the pads cover the knuckle zone and dorsal metacarpals of a Small hand rather than sitting misaligned as they would with a Medium-sized pad in a Small glove body.

Is the FF2931-S rated the same as larger sizes for ANSI cut resistance?

Yes. The FF2931-S carries ANSI/ISEA 105 Cut Level A5, identical to all sizes in the Predator series. Cut resistance derives from the HyperMax HPPE yarn and knit density, which does not vary by size.

What industries require Small-size mechanics gloves most frequently?

Aerospace assembly, precision electronics manufacturing, automotive interior assembly, medical device manufacturing, and pharmaceutical equipment maintenance are the sectors with the highest demand for Small mechanics gloves due to workforce demographics.

How does the pre-curved palm benefit Small-size workers?

Small hands often have a tighter natural grip radius. A pre-curved Small palm matches this smaller radius, reducing grip tension during repetitive precision tool work and lowering cumulative fatigue over extended shifts.

Will the hook-and-loop closure fit a narrower wrist?

Yes. The closure on the FF2931-S is sized for the narrower wrist circumferences of Small-hand workers, allowing a secure fit without excess flap material that could create entanglement risk.

Can I mix sizes in a single bulk order?

Yes. WC Safety supports mixed-size bulk orders for the FF2931 series. Safety managers can order Small, Medium, Large, X-Large, and XX-Large in quantities matching their workforce hand size distribution.

What is the service life of the FF2931-S vs. uncoated cut-resistant gloves?

The synthetic leather palm extends service life significantly by providing durable abrasion resistance where tool-handling friction is highest. The D3O pads resist compression set. The FF2931-S will typically outlast standard knit cut-resistant gloves in mechanics environments.