Is the TICONN-1735 Hi-Vis Class 3 Waterproof Bomber Jacket the right hi-vis jacket for wet-weather, high-speed roadway crews?

Short answer: If you need maximum conspicuity and weather protection in a single outer layer, the TICONN-1735 is a strong pick: it is rated to ANSI/ISEA 107 Type R Class 3 — the top roadway tier — with a waterproof shell and 360-degree retroreflective tape. For high-speed traffic, night operations, and rain, a Class 3 jacket like this does what a Class 2 vest cannot. If you only need warm-and-dry weather coverage at lower speeds, compare it against our best hi-vis jackets guide and the lighter options in hi-vis jackets before buying.

TICONN-1735 Hi-Vis Class 3 Waterproof Bomber Jacket Review (2026)

The TICONN-1735 sits at the top of the ANSI/ISEA 107-2020 ladder as a Type R, Class 3 garment — Type R meaning it is built for roadway and public-access work zones, and Class 3 meaning it carries the maximum fluorescent background fabric and 360-degree retroreflective tape so the wearer reads as a full, moving human form rather than a stripe. That puts it a full tier above a Class 2 vest: where Class 2 covers parking, warehouse, and roadway work under about 25 mph, Class 3 is the requirement for high-speed traffic, low light, and complex visual backgrounds, as our Class 2 vs Class 3 explainer lays out. What separates the 1735 from a standard Class 3 shirt or vest is the waterproof shell — it is positioned as foul-weather outerwear in the broader high-visibility apparel range, competing with insulated and rain-shell jackets in hi-vis jackets and hi-vis rainwear rather than with summer-weight shirts.

Editorial verdict — 4.3/5
For the money, the TICONN-1735 delivers genuine two-in-one value — top-tier Class 3 conspicuity plus a waterproof shell — that saves you from layering a separate rain jacket over a Class 3 vest; the trade-off is a heavier, less breathable garment than a mesh vest or a Class 3 shirt.VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are accurate as of the date shown and are subject to change. Full affiliate disclosure.

Who it is for

• High-speed roadway and DOT crews who need Class 3 in rain or snow — exactly the conditions our OSHA hi-vis requirements guide describes as mandating top-tier conspicuity
• Night-shift and low-light operations where 360-degree tape and a waterproof shell beat a daytime-only Class 2 vest
• Cold-weather and wet-weather crews who would otherwise stack a rain jacket over a Class 3 vest — see the lighter alternatives in our best hi-vis jackets guide
• Utility and infrastructure workers exposed to traffic and weather who want one compliant outer layer instead of a vest-plus-shell combo
• Flaggers and traffic-control personnel on high-speed approaches, where Class 3 is the right call per our Class 2 vs Class 3 guide
• Crews that already run a Class 3 fleece hoodie for cold-dry days and need a waterproof option for wet days

What the TICONN 1735 does well

Top-of-standard Class 3 conspicuity

The 1735 is rated to ANSI/ISEA 107 Type R Class 3, the maximum standalone visibility tier. Class 3's larger fluorescent background area and 360-degree tape make the wearer read as a full human form, which is the whole point of stepping up from a Class 2 vest on high-speed work — the logic our Class 2 vs Class 3 explainer walks through.

Genuine weather protection in one layer

Unlike a standard Class 3 vest or shirt, the 1735 is a waterproof shell, so it handles rain and wind without a second garment. That makes it a true outer layer for the wet end of the hi-vis jackets and hi-vis rainwear range rather than a fair-weather visibility piece.

Full-body, full-motion night visibility

The 360-degree retroreflective tape returns headlight and worklight beams from any angle, which is exactly what Class 3 is designed to deliver for night and low-light operations. For crews who work after dark, this is the practical reason to choose a Class 3 jacket over a daytime-focused Class 2 vest.

Strong daytime contrast

The fluorescent yellow-lime background gives high daytime contrast against asphalt, equipment, and most jobsite backdrops — the most widely recognized hi-vis color, as covered in our hi-vis colors explained and hi-vis color meaning references.

Layers cleanly for cold shifts

The full-zip bomber cut goes on and off over a hoodie or base layer without fighting head PPE, making it a sensible cold-weather companion to a Class 3 fleece hoodie or a Class 3 sweatshirt when the weather turns wet.

Where the TICONN 1735 falls short

Breathes less than mesh or vented options

A waterproof shell traps heat and moisture more than a mesh vest or a vented jacket. On high-exertion or warmer-day work you may overheat, in which case a Class 3 vest over a Class 3 shirt breathes better. Treat the 1735 as cold-and-wet gear, not an all-season layer.

Overkill for mild, dry conditions

The weather shell adds weight and bulk you do not need when it is dry and warm. For those conditions a lighter Class 3 garment from our best hi-vis jackets guide or even a Class 3 long-sleeve shirt is the more comfortable compliant choice.

Single color, no orange option

The listing is fluorescent yellow-lime only. Crews that standardize on fluorescent orange — for contrast against green vegetation or by contract spec — will need a different jacket; our hi-vis color meaning reference explains when orange is the better call, and the orange Class 3 bomber is one alternative.

Conspicuity is a wear item

Like any hi-vis garment, the fluorescent fabric fades and the retroreflective tape degrades with abrasion, soiling, and wash cycles. A waterproof shell shows mud and road grime that dull daytime contrast, so it needs regular cleaning and eventual retirement to stay compliant per how to choose a hi-vis vest.

TICONN 1735 vs the competition

Compare prices on Amazon →TICONN 1735 on Amazon[Ergodyne GloWear 8377

When to step up from the TICONN 1735

If you want maximum conspicuity but also need orange instead of yellow-lime — for vegetation contrast or contract spec — step over to the Ergodyne GloWear 8377 orange bomber, which delivers the same Class 3 roadway tier in fluorescent orange. If your problem is cold rather than wet, a Class 3 fleece full-zip hoodie trades the waterproof shell for fleece warmth at lower bulk. And if you only ever work warm-and-dry, skip the jacket entirely and run a Class 3 vest over your own shirt — our best hi-vis jackets guide maps these trade-offs in detail.

Category context

Hi-vis garment choice comes down to traffic speed, light, and weather. Below roughly 25 mph — parking, warehouse, low-speed zones — a Class 2 vest is the floor; above that, or in low light and complex backgrounds, Class 3 conspicuity is required, the line drawn in our Class 2 vs Class 3 guide and reinforced by OSHA hi-vis rules. Within Class 3, format matters: a vest breathes best, a Class 3 shirt adds sleeve coverage, a fleece hoodie adds dry-cold warmth, and a waterproof jacket like the 1735 handles cold-and-wet. Closure is the last variable — the 1735's full zip gives controlled ventilation and quick on/off over head PPE, while vests across the high-visibility range split between zipper, hook-and-loop, and five-point breakaway by snag risk, as our how to choose a hi-vis vest reference details.

Total cost of ownership

A hi-vis jacket is a wear item, not a fixed asset: ANSI/ISEA 107 conspicuity depends on the fluorescent fabric staying bright and the retroreflective tape staying intact, and both degrade with UV exposure, abrasion, soiling, and wash cycles. A waterproof shell like the 1735's resists soaking but shows mud and road grime that dull daytime contrast, so plan on regular cleaning per the care label and inspection for faded panels or peeling tape. Because it is built as a durable outer layer rather than a thin summer garment, a Class 3 jacket typically outlasts a lightweight Class 3 shirt in service, but it still needs retirement once the tape stops reflecting or the fabric fades below standard — the same lifecycle logic in our how to choose a hi-vis vest reference. Buying one compliant waterproof jacket instead of a Class 3 vest plus a separate rain shell can lower total cost and simplify your PPE program, especially across the wider high-visibility apparel catalog.

Final verdict

Buy the TICONN-1735 if your crews face high-speed traffic, night work, or complex backgrounds in cold, wet weather and you want one garment that is both Class 3 compliant and waterproof — it removes the need to stack a rain shell over a Class 3 vest and reads clearly day and night. If you work warm-and-dry, choose a lighter Class 3 shirt or a breathable Class 3 vest instead; if you need orange, go with the GloWear 8377 orange bomber; and if you only need dry-cold warmth, the TICONN-1903 fleece hoodie is the better fit. For the full comparison set, start with our best hi-vis jackets guide and the hi-vis jackets collection.

VIEW ON WC SAFETY →CHECK PRICE ON AMAZON →

TICONN 1735 FAQ

What ANSI class is the TICONN-1735 jacket?

It is rated to ANSI/ISEA 107 Type R, Class 3 — the highest standalone conspicuity tier in the standard. Class 3 means it carries the maximum fluorescent background area plus 360-degree retroreflective tape for full-body, full-motion visibility. That is a full tier above a Class 2 vest.

What does Type R mean on this jacket?

Type R designates roadway and public-access work — garments meant for workers exposed to traffic on public roads and in temporary work zones. The 1735 is a Type R Class 3 jacket, so it targets roadway and high-speed-traffic environments rather than off-road-only Type O use. Our ANSI/ISEA 107 guide explains the Type R versus Type O distinction.

When do I need Class 3 instead of a Class 2 vest?

Step up to Class 3 for high-speed traffic, low-light or night work, and complex visual backgrounds where a Class 2 garment no longer reads clearly. A Class 2 vest covers lower-speed roadway, parking, and warehouse work; Class 3 covers the rest. Our Class 2 vs Class 3 guide walks through the speed and light thresholds.

Is the TICONN-1735 actually waterproof?

The listing describes it as a waterproof bomber jacket built to combine conspicuity with real weather protection in one layer. That means it is intended as an outer shell for rain and wind, not just a visibility piece. For other foul-weather options, see hi-vis rainwear.

How does this compare to the Ergodyne GloWear 8377 bomber?

Both are Type R Class 3 bomber jackets, so they share the top conspicuity tier. The key difference is color and weather focus: the GloWear 8377 is fluorescent orange, while the 1735 is yellow-lime and emphasizes its waterproof shell. Choose by your color standard and how wet your conditions are — our best hi-vis jackets guide compares both.

Jacket, vest, or shirt — which Class 3 format should I pick?

A vest breathes best and layers over your own clothing; a Class 3 shirt adds sleeve coverage for warm weather; a fleece hoodie adds dry-cold warmth; and a waterproof jacket like the 1735 is for cold and wet. Match the format to weather and exertion. The hi-vis jackets collection covers the outerwear end.

Will this jacket overheat me in summer?

Likely, yes — a waterproof shell traps heat and breathes less than a mesh vest. For warm-weather Class 3, a breathable Class 3 vest over a Class 3 shirt is more comfortable. Reserve the 1735 for cold and wet conditions.

Why is it yellow-lime and not orange?

Fluorescent yellow-lime is the most widely recognized hi-vis color and delivers strong daytime contrast against most jobsite backdrops. The 1735 is offered in yellow-lime; if your contract or environment calls for orange, see our hi-vis color meaning reference and consider the orange Class 3 bomber.

Does a Class 3 jacket meet OSHA requirements for roadway work?

Class 3 is the top conspicuity tier and is what's specified for high-speed and low-light roadway exposure, but OSHA requirements depend on your specific task, speed, and traffic control plan. Always confirm against your site safety plan and the rules summarized in when does OSHA require high visibility.

How long will the conspicuity last?

Hi-vis performance is a wear item: fluorescent fabric fades with UV and soiling, and retroreflective tape degrades with abrasion and wash cycles. Keep the jacket clean, inspect the tape and fabric, and retire it once it fades below standard — the lifecycle logic in our how to choose a hi-vis vest reference applies to jackets too.

Can I wear this over a hoodie or base layer?

Yes — the full-zip bomber cut is designed to layer over a hoodie or base layer for cold shifts. Pairing it with a Class 3 fleece hoodie or a Class 3 sweatshirt gives a flexible cold-and-wet system.

Is one Class 3 waterproof jacket cheaper than a vest plus a rain shell?

Often, yes — buying a single compliant waterproof jacket can cost less and simplify your program versus stacking a separate rain shell over a Class 3 vest. It also reduces bulk. Weigh that against breathability, since a sealed shell is warmer; our best hi-vis jackets guide covers the trade-off.

What about a fleece hoodie instead of this jacket?

If your problem is cold rather than wet, a Class 3 fleece full-zip hoodie gives warmth with less bulk and better breathability, but it is not a waterproof shell. Choose the 1735 when rain and wind are in play.

Does the color affect compliance?

Both fluorescent yellow-lime and fluorescent orange-red are ANSI-recognized background colors, so color choice is about visibility against your environment and any contract spec, not about whether the garment is compliant. See hi-vis colors explained for how to pick.

Is this overkill for warehouse or parking-lot work?

Generally yes — for lower-speed indoor or parking environments a Class 2 vest usually meets the requirement, and a waterproof Class 3 jacket adds heat and bulk you do not need. Save the 1735 for high-speed, low-light, or wet outdoor work.

How do I keep the jacket compliant over time?

Clean it per the care label, inspect the fluorescent fabric and retroreflective tape regularly for fading or peeling, and retire it once it no longer meets the standard. A waterproof shell hides wet but shows mud, so keep daytime contrast clean — the maintenance principles in how to choose a hi-vis vest apply directly.

Where can I see how this fits among other hi-vis jackets?

Start with our best hi-vis jackets guide for ranked comparisons, then browse the full hi-vis jackets collection and the broader high-visibility apparel range to weigh waterproof, fleece, and vest options side by side.