Miller by Honeywell MFL-1-Z7/6FT TurboLite Personal Fall Limiter

Miller by Honeywell MFL-1-Z7/6FT TurboLite Personal Fall Limiter

The Miller by Honeywell MFL-1-Z7/6FT TurboLite Personal Fall Limiter is a compact personal fall limiter from Miller by Honeywell — one of the most trusted names in fall protection — designed to replace traditional shock-absorbing lanyards with a smaller, lighter, retractable unit. Vendor: Miller by Honeywell · SKU: MILLER-MFL-1-Z7-6FT.

View on Amazon →

Key Specifications

OSHA & ANSI Compliance

Miller TurboLite Personal Fall Limiters meet ANSI A10.32, ANSI Z359-2007, CSA Z259.12-01 Class 1, and OSHA 1910.66/1926.502. No annual factory recertification is required — a major cost advantage over traditional lanyards.

Also See

• Miller MFL-3-Z7/6FT TurboLite with Snap Hook
• Miller MFL-4-Z7/6FT TurboLite with Rebar Hook
• Miller MFL-9-Z7/6FT TurboLite Dual Snap Hooks
• Miller MFLB-12-Z7/6FT Twin Turbo 100% Tie-Off System
• All Fall Protection Lanyards
• Fall Protection Equipment

FAQ

What is a Personal Fall Limiter (PFL)?

A PFL is a compact, retractable device that locks within inches of a fall rather than feet, minimizing fall distance and arresting force compared to a traditional shock-absorbing lanyard. The TurboLite qualifies as a Class A or B SRL/PFL per ANSI Z359.14.

Does the Miller TurboLite require annual recertification?

No — unlike many competing SRLs, the Miller TurboLite does not require annual factory recertification. Inspect before each use per ANSI Z359.14 requirements.

What is the maximum capacity of Miller TurboLite PFLs?

All TurboLite models are rated for users up to 400 lb (combined body weight and tools), higher than the standard 310 lb rating of most shock-absorbing lanyards.

Where does the TurboLite attach on the harness?

The TurboLite attaches to the back D-ring of a full-body harness. Some models include a unit connector (carabiner) for direct harness attachment; others (MFL-3, MFL-4) attach directly to the harness D-ring without a separate connector.

What is the Twin Turbo system (MFLB-12)?

The Twin Turbo system includes a D-ring connector and two TurboLite PFLs for continuous 100% tie-off. Workers can connect to one anchor, then connect the second unit before disconnecting the first, maintaining fall protection at all times.