Honeywell North 760008ASW Full Face Welding Respirator — North 7600 Series, NIOSH TC-14C, APF 50, Small Size, Integrated Welding Lens

Short answer: The North 760008ASW is a NIOSH TC-14C approved full-face respirator carrying APF 50 under OSHA 1910.134 Appendix A — five times the protection of a half-mask. It uses the North bayonet cartridge system, compatible with the complete North cartridge library. The 760008ASW adds an integrated welding lens to the full-face platform, combining respiratory and arc welding eye protection in a single facepiece — the solution for welders in confined spaces, pipes, and overhead positions where a conventional welding helmet cannot be worn without breaking the respiratory seal. The 7600 series uses premium silicone construction with 5-strap harness for full-shift comfort. Confirm small size with OSHA-required fit testing before operational deployment.

Honeywell North 760008ASW Full Face Welding Respirator — Small | North 7600 Series

Reviewed by the WC Safety Editorial Team — PPE specialists with hands-on experience across industrial, construction, chemical, and welding environments. Last updated: May 2026.

The Honeywell North 760008ASW is the small-size welding full-face respirator in the North North 7600 Series. It carries NIOSH 42 CFR 84 TC-14C approval and delivers an Assigned Protection Factor of 50 per OSHA 29 CFR 1910.134 Appendix A when properly fit-tested — the highest APF available in a tight-fitting air-purifying respirator. The 760008ASW uses the North bayonet cartridge connection, providing access to the complete North cartridge library — P100 particulate, organic vapor, acid gas, combination cartridges, and specialty mercury vapor protection. The integrated welding lens addresses the core problem for welders requiring APF 50 respiratory protection: a conventional welding helmet worn over a full-face respirator breaks the face seal. The 760008ASW eliminates this compromise — the welding lens is integral to the facepiece, maintaining the seal and APF 50 through the welding operation. The 7600 series features soft non-allergenic silicone face seal and 5-strap adjustable harness engineered for full-shift industrial wear. OSHA 1910.134(f)(2) requires fit testing before operational deployment.

Key Features — Honeywell North 760008ASW

• Premium silicone face seal: The 7600 series uses soft, non-allergenic silicone that conforms to facial contours under minimal pressure. Silicone resists degradation from oils, solvents, and industrial chemicals — maintaining face seal integrity and flexibility across the service life of the facepiece. Appropriate for workers with latex sensitivity
• Wide-view hard-coated polycarbonate lens: The panoramic polycarbonate lens provides broad field of vision for situational awareness in hazardous environments. Hard coating reduces surface scratching that can compromise lens clarity over time. The lens provides integrated eye protection against splash and mist, eliminating separate chemical splash goggles in most industrial environments
• 5-strap adjustable head harness: The 5-strap harness distributes facepiece weight and seal pressure evenly across the head, reducing facial fatigue during extended wear and maintaining consistent seal geometry during physical work and movement
• Integrated welding lens — arc eye protection combined with APF 50 respiratory protection: The 760008ASW includes an integrated welding lens that provides UV/IR arc radiation protection for welding operations without a separate welding helmet. This eliminates the seal compromise that occurs when a conventional welding helmet is placed over a full-face respirator — the core problem the 760008ASW was designed to solve. Confirm shade specification with the product datasheet for your specific welding process and amperage range
• Designed for confined-space and positional welding: Conventional welding helmets are impractical in confined spaces, pipe welds, overhead positions, and tight structural work. The 760008ASW allows welding operations in positions where a separate welding helmet cannot be worn without breaking the respiratory seal — maintaining APF 50 protection throughout the welding operation
• NIOSH TC-14C, APF 50: The 760008ASW meets NIOSH approval requirements for full-face tight-fitting APRs under 42 CFR Part 84. APF 50 — five times a half-mask — is appropriate for environments up to 50× OEL. Proper OSHA-required fit testing is required to claim the APF 50
• Complete North cartridge library access: The North bayonet connection provides access to every North bayonet cartridge — from standalone P100 to the 75852P100L mercury vapor combination cartridge. Cartridge platforms are brand-specific: North bayonet cartridges do not fit 3M, MSA, or Moldex respirators
• Integrated eye and face protection: The polycarbonate lens covers the face and eyes — eliminating separate chemical goggles in most industrial applications. In environments with simultaneous respiratory and eye hazards, the 760008ASW reduces PPE ensemble complexity and eliminates seal gaps that can occur between separate goggles and a half-mask

Applications — When to Use the North 760008ASW

• Arc welding with weld fume respiratory protection: The defining application of the 760008ASW. MIG, TIG, stick (SMAW), and flux-core (FCAW) welding generates metal oxide fumes — hexavalent chromium from stainless steel welding, manganese from carbon steel, zinc oxide from galvanized metal, iron oxide from all arc processes. The 7580P100 P100 cartridge addresses the particulate hazard; the integrated lens provides arc eye protection simultaneously. APF 50 provides significantly higher weld fume protection than a half-mask APF 10
• Confined-space and positional welding: Pipe welding, overhead structural work, tank entry welding, and tight fabrication positions where a conventional welding helmet creates a seal problem or cannot be positioned correctly. The 760008ASW integrates both respiratory and arc eye protection in a single facepiece — no seal compromise, no positional constraint from a separate helmet
• Stainless steel and chrome-bearing alloy welding: TIG and MIG welding of stainless steel generates hexavalent chromium (Cr(VI)) — a NIOSH-classified carcinogen with a OSHA PEL of 5 µg/m³ and action level of 2.5 µg/m³. APF 50 from the 760008ASW with 7580P100 P100 provides substantially more Cr(VI) protection than a half-mask half-mask APF 10. Weld fume controls (ventilation, position) should always be the primary controls; the 760008ASW is the respiratory protection component
• Galvanized steel welding — zinc oxide fume fever prevention: Welding galvanized steel generates zinc oxide fume, which causes metal fume fever at exposures above the OSHA PEL of 5 mg/m³. The 760008ASW with 7580P100 P100 provides APF 50 zinc oxide protection. Do not weld galvanized steel without P100 filtration regardless of apparent ventilation
• Thermal cutting in industrial environments: Plasma cutting, oxy-fuel cutting, and arc gouging generate high-intensity fume and arc radiation. The 760008ASW with P100 addresses the fume; the integrated lens protects against arc radiation from cutting operations. Confirm welding lens shade covers the radiation intensity of the cutting process you are using
• Maintenance welding in process facilities: Maintenance welders in refineries, chemical plants, and wastewater facilities work in environments combining weld fume with process chemical vapors. The 7583P100L OV/AG/P100 on the 760008ASW addresses both the weld fume particulate and chemical vapor co-exposure simultaneously

Compatible Cartridges — North Bayonet System

The North 760008ASW accepts all North bayonet cartridges. Select based on the documented hazard profile from your site industrial hygiene assessment:

North bayonet cartridges are not compatible with 3M, MSA, Moldex, or other brands. Full cartridge lineup: North Respirator Cartridges & Filters →

Job-site cartridge selection: North Respirator Cartridge Guide 2026 →

North 7600 Series Welding Full Face — All Sizes

North 760008ASW vs. Alternatives

Cartridge platforms are brand-specific — North and 3M bayonet systems are not interchangeable. All full-face APRs listed carry APF 50 when properly fit-tested per OSHA 1910.134 Appendix A.

OSHA Compliance & Fit Testing

All Honeywell North full-face respirators carry NIOSH 42 CFR 84 TC-14C approval — the NIOSH classification for tight-fitting full-face air-purifying respirators. Under OSHA 29 CFR 1910.134 Appendix A, a properly fit-tested full-face APR carries an Assigned Protection Factor of 50 — five times the APF 10 of a half-mask.

• Written respiratory protection program: Required under OSHA 1910.134(c) before any operational use — must include hazard assessment, written program, medical evaluation, fit testing, and cartridge change-out schedules. Full-face respirators place higher respiratory demands than half-masks and require specific documentation
• Medical evaluation first: OSHA 1910.134(e) requires a PLHCP-reviewed medical questionnaire before fit testing or operational use — full-face respirators require medical clearance before workers may be fit tested
• Annual fit testing: OSHA 1910.134(f)(2) mandates annual qualitative (QLFT) or quantitative (QNFT) fit testing. Qualitative fit testing is valid only for respirators used at ≤ APF 10; above that, quantitative fit testing is required for strict compliance. Confirm with your PLHCP or industrial hygienist for the specific testing protocol required for APF 50 programs
• User seal check every use: Positive and negative pressure checks per OSHA Appendix B-1 before each entry into the work area — required for all tight-fitting facepieces
• Cartridge change-out schedule: OSHA 1910.134(d)(3)(iii) requires a written schedule based on objective data — never rely on odor breakthrough as the change indicator
• APF 50 ceiling: Full-face APRs are appropriate when airborne concentrations are ≤ 50× OEL. If your hazard assessment documents concentrations above 50× OEL, a PAPR (APF 1000 with loose-fitting hood) or SCBA is required. Full-face APRs may not be used in IDLH atmospheres except under specific conditions defined in OSHA 1910.134(d)(2)
• Eye protection integration: The polycarbonate lens provides incidental splash and mist protection — a significant operational advantage in corrosive chemical environments. Lens inspection and replacement schedules should be documented in the written program

Who Needs the Small Size?

The Small size is correct when OSHA-required fit testing confirms the Medium/Large geometry does not produce an adequate seal. Workers with shorter chin-to-nose distance, narrower face width, or otherwise smaller facial dimensions may achieve a better seal in the small facepiece. Do not select Small based on general body size — always start with the M/L (760008AW) if you have not been fit tested, then move to small only if M/L fails OSHA-required fit testing.

Important: Do not select size based on general body size or height. Facial geometry determines respirator fit. The 760008ASW and 760008AW are identical in every respect — NIOSH approval, APF, cartridge compatibility, welding lens — except facepiece geometry. OSHA 1910.134(f)(2) requires annual fit testing regardless of size chosen.

Frequently Asked Questions — Honeywell North 760008ASW

What makes the 760008ASW different from a standard full-face respirator?

The 760008ASW adds an integrated welding lens to the full-face respirator platform — combining NIOSH TC-14C APF 50 respiratory protection with arc welding eye protection in a single facepiece. The standard equivalent (760008AS) provides the same respiratory protection but lacks the welding lens, requiring a separate welding helmet that creates face seal problems. The 760008ASW is specifically for welders who need both protections simultaneously in confined-space welding, positional welding, and tight structural work where a conventional welding helmet is impractical.

What cartridge do I need for welding with the 760008ASW?

For standard carbon, stainless, or galvanized steel welding: 7580P100 P100 is the standard cartridge — weld fume is primarily a particulate hazard (metal oxides). For stainless steel specifically, hexavalent chromium (Cr(VI)) makes P100 filtration mandatory. If solvent degreasing or chemical co-exposure is documented in your hazard assessment, use 7581P100L OV/P100. For welding in chemical process areas with OV/AG co-exposures, 7583P100L OV/AG/P100. See: North Cartridge Guide 2026 →

What welding processes can the 760008ASW be used for?

The 760008ASW is appropriate for arc welding processes including MIG, TIG, stick (SMAW), and flux-core (FCAW) — processes generating both UV/IR arc radiation (requiring the welding lens) and metal oxide fumes (requiring P100 filtration). Confirm the welding lens shade specification with the product datasheet for your specific process and amperage range. For thermal cutting (plasma, oxy-fuel), verify the lens shade is rated for the radiation intensity of your cutting arc.

What NIOSH approval does the 760008ASW carry?

The 760008ASW carries NIOSH TC-14C approval as a full-face tight-fitting air-purifying respirator under 42 CFR Part 84. Under OSHA 29 CFR 1910.134 Appendix A, a properly fit-tested 760008ASW carries APF 50 — five times the protection of a half-mask.

What size do I need?

The M/L (760008AW) is the recommended starting point for most workers. Use the Small only after OSHA fit testing confirms M/L does not seal. Facial geometry determines size — not body size or height. OSHA 1910.134(f)(2) requires annual fit testing.

Can I use North cartridges from my half-mask on the 760008ASW?

Yes — the 760008ASW uses the same North bayonet cartridge connection as the North 7700 and 5500 half-mask series. All North bayonet cartridges (7580P100, 7581P100L, 7583P100L, and others) fit both the full-face and half-mask platforms. 3M, MSA, and Moldex cartridges are not compatible — North bayonet is a proprietary connection. See: North Cartridge Guide 2026 →

How do I maintain the welding lens?

Inspect the welding lens before each use — replace if cracked, scratched through the protective coating, or damaged by weld spatter pitting that impairs visibility or arc protection. Gently clean spatter from the lens surface without abrasives. The welding lens is a serviceable component with a defined replacement schedule — confirm service life with the product datasheet and replace per schedule regardless of apparent visual condition. A degraded welding lens provides reduced arc radiation protection even if visually intact.

How does the 760008ASW compare to the 54001SW?

Both carry NIOSH TC-14C approval and APF 50 with integrated welding lens. The 7600 series (760008AW) uses premium silicone construction and 5-strap harness for extended-wear comfort; the 5400 (54001W) provides the same welding lens integration and cartridge access at lower cost. See: 54001SW.