Ergodyne 7031 ProFlex A3 Cut-Resistant Sandy Nitrile Gloves

The Ergodyne ProFlex 7031 Nitrile Coated Cut-Resistant Gloves provide ANSI/ISEA 105-2016 Level A3 cut resistance with sandy nitrile palm coating — delivering mid-range cut protection for industrial manufacturing, construction, and material handling operations where the cut hazard profile requires above-A2 protection from sharper structural materials, metal components, and fabricated parts, with sandy nitrile grip performance appropriate for the dry-to-moderate surface conditions typical of these environments. The 7031 occupies the A3 standard-shell position in the Ergodyne ProFlex cut-resistant lineup — providing documented A3 cut protection in the non-hi-vis format for indoor manufacturing and fabrication environments where equipment-area visibility marking is not a program requirement but where the cut hazard from specific materials exceeds what A2 gloves can adequately document. Level A3 cut resistance addresses the material range between the A2 baseline (sufficient for general assembly and light fabrication) and the A4 level required for sharp metal stampings and precision components — appropriate for sheet metal work with cut and fold edges, structural steel with welded and sawn surfaces, medium-gauge wire and cable handling, construction material fabrication, and the range of industrial materials where measured cut force puts the hazard in the A3 threshold. Sandy nitrile coating provides the grip and durability characteristics appropriate for the dry industrial surface conditions where A3 cut materials are typically handled — textured surface grip on smooth metal parts and tool handles, nitrile chemistry resistance to the oils and chemicals common in manufacturing and fabrication, and durability under sustained material handling across the work shift. Programs that tier cut protection by task group include the 7031 for A3-documented exposure levels alongside A2 gloves for lower-hazard operations and A4 or higher for the most demanding material handling — matching the cut certification to the actual hazard level across the facility.

Ergodyne 7031 ProFlex A3 Cut-Resistant Sandy Nitrile Gloves — Key Features

• ANSI/ISEA 105-2016 Level A3 cut resistance — mid-range cut protection for sheet metal, wire rope, and industrial fabrication materials
• Sandy nitrile palm coating — textured dry-grip for parts, tools, and general industrial surface conditions
• Standard shell (non-hi-vis) — for indoor manufacturing and fabrication where equipment-area visibility marking is not required
• A3 level in the ProFlex cut-resistant lineup — between A2 general work and A4 for higher-cut industrial materials
• Open-back knit construction — breathability for all-day comfort in sustained production operations

Specifications

A3 Cut Level: The Gap Between General Work and High-Hazard Industrial

A3 cut resistance addresses the material range that falls between the A2 protection appropriate for general assembly, packaging, and construction and the A4 protection appropriate for precision metal fabrication, stamped components, and sharp industrial manufactured parts. A3-level materials include medium-gauge sheet metal with sawn and sheared edges that generate more cutting force than bent construction sheet but less than precision-slit coil stock, wire rope and cable products with medium wire gauge, structural steel and iron components with weld spatter and machined surfaces, medium-hardness fabricated parts with stamped but not precision-ground edges, and manufactured construction materials — rebar wire ties, medium-gauge expanded metal, and structural components that generate A3-range cut forces based on their material hardness and edge geometry. The 7031 provides A3 documentation for these material categories without over-specifying to the A4 or higher levels that are appropriate for materials generating higher measured cut force — allowing facilities to match glove certification to actual hazard assessment rather than defaulting to a higher level that adds cost and stiffness without addressing the actual measured cut exposure. Sandy nitrile is the appropriate grip formulation for the dry-to-moderate conditions where these materials are handled — providing reliable friction against smooth metal surfaces, structural steel, and tool handles without the specialization of wet-condition or heavy-oil-environment coatings that A3 material environments typically don't require.

Compliance and Certifications

• ANSI/ISEA 105-2016 — Cut resistance Level A3
• OSHA 29 CFR 1910.138 — Hand protection requirements

Real-World Benefits

A3 cut protection addresses medium-cut industrial hazards where A2 gloves under-protect without the added cost and stiffness of A4+ high-cut specifications for materials that don't require them. Sheet metal fabricators, structural steel erectors, and industrial workers handling medium-cut-force materials receive the A3 documentation their hazard assessment requires — matched to actual cut force measurements rather than defaulting upward to A4 for materials that test in the A3 range.

Sandy nitrile palm provides consistent grip on dry metal parts, tool handles, and industrial materials across the range of manufacturing surface conditions. General industrial workers handling steel components, structural materials, and production parts in dry ambient conditions maintain confident grip performance from the sandy nitrile — appropriate for the range of surfaces encountered in A3-exposure manufacturing and fabrication environments.

Applications and Use Cases

• Sheet metal fabrication — medium-gauge forming and handling — 7031 for sheet metal workers handling medium-gauge sawn and sheared steel with A3-documented cut force in fabrication and assembly operations
• Structural steel work — weld surface and fabricated component handling — A3 sandy nitrile cut-resistant gloves for structural steel workers handling components with machined and welded surfaces in indoor fabrication environments
• Industrial wire and cable handling — medium-gauge wire rope and cable products — A3 cut documentation for cable handling workers where wire gauge generates A3-range cut force in installation and maintenance operations
• General manufacturing — A3 material exposure environments — cut-resistant work gloves for production workers in facilities with documented A3 cut exposure from specific materials and operations

Related Products

For A3 cut in hi-vis lime shell (equipment-active construction), see Ergodyne ProFlex 7021 Hi-Vis Nitrile Gloves — A3 Cut. For A4 sandy nitrile cut-resistant gloves, see Ergodyne ProFlex 7024 Nitrile Gloves — A4 Cut. For A3 cut with 3/4 foam nitrile, see Ergodyne ProFlex 7043 A4 3/4 Foam Nitrile Gloves. Browse the complete Hand Protection collection.

Frequently Asked Questions

What is the difference between the Ergodyne 7031 A3 and the 7024 A4 in terms of use cases?

The 7031 provides Level A3 cut resistance for materials that generate mid-range cut force — sheet metal forming edges, structural steel, medium-gauge wire. The 7024 A4 provides one tier higher cut protection for materials with sharper edges or harder materials that generate A4-range cut force — precision metal stampings, machined components, glass fiber composites. Select based on your hazard assessment: if your documented cut measurement places materials in the A3 range, the 7031 provides the matched protection level; if measurements place materials at A4, the 7024 is the appropriate tier. Over-specifying to A4 for A3 materials adds cost and typically adds glove stiffness without addressing the actual hazard level.

Is the 7031 suitable for wet or oily conditions?

Sandy nitrile coating is optimized for dry-to-moderate industrial surface conditions and provides adequate resistance to light oil contact. For consistently wet surfaces — rain exposure, wet materials, cleaning operations — foam nitrile provides better grip compliance. For oily metalworking conditions with cutting fluids and lubricants, heavy-duty nitrile coating (as on the 7070) is better matched. The 7031's sandy nitrile is appropriate for standard dry manufacturing and fabrication environments where occasional light surface contamination is encountered but wet or oily conditions are not the primary surface contact.

How does the 7031 compare to the 7021 hi-vis A3?

Both provide A3 cut resistance, but differ in shell color and intended environment. The 7031 has a standard (non-hi-vis) shell for indoor manufacturing and fabrication environments where hand visibility marking for equipment operators is not required. The 7021 A3 has a lime hi-vis shell for construction and outdoor environments where equipment-active areas and multiple workers create a need for visible hand identification to equipment operators. If your A3 cut environment is an outdoor construction site or equipment-active area, the 7021 hi-vis addresses both the cut protection and visibility requirements simultaneously.

What coating does the 7031 use and how durable is it?

The 7031 uses sandy nitrile palm coating — a textured nitrile formulation that provides grip surface area and chemical resistance. Sandy nitrile is generally more durable than PU coatings for abrasive industrial environments and maintains grip performance under sustained handling of rough materials. Like all coated work gloves, the coating durability depends on the abrasive exposure in your application — for highly abrasive materials or frequent contact with sharp edges, inspect gloves regularly and replace when coating wear affects grip performance or cut protection integrity.

Does the 7031 meet touchscreen compatibility requirements?

The 7031 with sandy nitrile palm coating does not feature touchscreen-compatible fingertip materials. For A3 cut-resistant gloves with touchscreen fingertip compatibility, check Ergodyne's current product lineup for touchscreen-compatible models in the A3 cut range. Touchscreen compatibility in cut-resistant gloves typically requires conductive fiber in the fingertip area, which is specified explicitly in models designed for that use case — verify in current Ergodyne specifications if touchscreen use is a program requirement alongside A3 cut protection.