MCR Safety PD6951-M Predator A6 Impact PU Gloves — Medium

The MCR Safety PD6951-M Predator A6 Impact PU Gloves in Medium combine certified ANSI/ISEA 105 A6 cut resistance with multi-zone impact protection in a medium-size fit engineered for a broad range of adult hand sizes. Built on MCR Safety's HyperMax HPPE shell—a high-tenacity engineered fiber that achieves A6-level cut resistance at lower bulk than earlier-generation cut-resistant materials—the PD6951-M features a polyurethane (PU) palm and fingertip coating for tactile sensitivity and reliable grip on both dry and lightly oily surfaces. Molded TPR knuckle guards and dorsal impact padding absorb and redirect blunt-force energy from pinch points, dropped tools, and struck-by events that are routine hazards in metal fabrication, oil and gas, construction, and heavy industrial assembly. For safety managers and procurement teams sourcing ANSI-compliant impact gloves in the most common adult size, the PD6951-M represents a benchmark in dual-hazard hand protection at a competitive total cost of ownership.

Key Features

• ANSI/ISEA 105 A6 Cut Resistance — Tested to withstand a minimum of 3,000 grams of cutting force; appropriate for sheet metal edges, glass, stamped components, and industrial strapping.
• TPR Knuckle and Dorsal Impact Guards — Thermoplastic rubber impact protection positioned at the highest-risk zones on the back of the hand; compliant with ANSI/ISEA 138 impact performance thresholds.
• HyperMax HPPE Shell — MCR Safety's proprietary high-performance polyethylene fiber provides A6 cut protection with reduced weight and improved moisture management versus aramid-based liners.
• Polyurethane Palm Coating — Thin-film PU application over the palm and fingertips maintains tactile sensitivity for precision assembly and parts handling tasks.
• Medium Size Fit — Sized for hand circumferences of approximately 8–9 inches; the most commonly ordered size across industrial workforce populations.
• Adjustable Hook-and-Loop Wrist Closure — Prevents glove migration during dynamic tasks and forms a debris exclusion barrier at the cuff.
• Machine Washable Construction — Supports industrial laundering programs, extending glove service life and reducing per-pair replacement cost.
• ANSI/ISEA 105 and 138 Compliant — Dual-standard compliance simplifies PPE program documentation for OSHA 29 CFR 1910.138 and equivalent regulatory requirements.

Detailed Description

Medium is the most frequently ordered size across industrial glove programs, and the PD6951-M is designed to deliver the full performance profile of the Predator series in a fit that maximizes comfort and protective function for the largest segment of a typical workforce. An improperly sized glove—even one with excellent materials—compromises protection: excess material at the fingertips reduces dexterity and can create snagging hazards, while a glove that fits too tightly restricts circulation and accelerates fatigue. The PD6951-M is cut and sewn to the ergonomic profile that MCR Safety has developed through analysis of hand measurement data across large industrial populations.

The HyperMax HPPE liner is the core of the glove's cut protection architecture. High-performance polyethylene fibers are engineered at the molecular level for tensile strength and resistance to shear forces—the same mechanism that causes lacerations from metal edges, glass, and strapping. At the A6 rating, the PD6951-M liner resists cutting forces that would penetrate lower-rated gloves (A1 through A5), making it appropriate for tasks where the worker has sustained contact with sharp edges rather than only incidental exposure.

The PU palm coating is applied in a controlled thickness that preserves the hand's natural proprioception—the ability to sense object texture, edges, and position through the glove. For assembly workers, quality inspectors, and technicians who need to feel part geometry while also handling sharp edges, this tactile transparency is a functional requirement that many heavier coatings cannot meet. The PU material also resists mild abrasion from rough surfaces and provides adequate grip in the dry and lightly oily conditions common in manufacturing environments.

Impact protection in the PD6951-M is provided by molded TPR (thermoplastic rubber) guards at the knuckles and dorsal hand surface. These guards are bonded into the glove structure at positions that correspond to the highest-frequency impact sites identified in hand injury analysis: the metacarpal-phalangeal joints (knuckles) and the mid-dorsal region. The TPR compound absorbs kinetic energy through elastic deformation, dissipating the energy of a strike over a larger time period and surface area. This mechanism significantly reduces peak transmitted force to underlying tissue and bone—the mechanism by which ANSI/ISEA 138 impact ratings are measured and expressed.

Applications and Use Cases

• Sheet Metal Fabrication — Handling formed sheet metal components with unfinished edges, feeding stock through punch presses, and deburring operations all require A6-level cut protection with dexterity for part manipulation.
• Oil Field and Pipeline Maintenance — Valve turning, pipe fitting, and equipment maintenance involve abrasive steel surfaces and impact hazards from hand tools and heavy components on production facilities.
• Structural Steel and Ironwork — Bolting, aligning, and rigging structural steel members exposes ironworkers to cut edges and hammer or wrench impact events throughout a shift.
• Automotive Parts Handling — Stamped body panel handling, glass installation, and underbody assembly tasks combine sharp edges with the need for tactile feedback for part positioning.
• Construction General Labor — Handling rebar, metal decking, wire mesh, and strapping during foundation and structural phases requires reliable cut protection with all-day wearability.
• Warehousing and Distribution with Metal Strapping — Workers handling metal-strapped pallets or banded loads of steel or glass products benefit from the PD6951-M's combined cut and impact profile.

Specifications

Related Products

• Shop All Cut-Resistant Gloves
• Browse Industrial Work Gloves
• MCR Safety Full Product Line

Frequently Asked Questions

What hand size does Medium fit?

Medium typically fits a hand circumference of approximately 8–9 inches, measured around the widest part of the palm excluding the thumb. It is the most widely ordered size in industrial glove programs and suits a broad range of adult hands. For a precise fit, measure hand circumference and compare to MCR Safety's published sizing chart.

How is the PD6951-M different from the PD6951-L?

The PD6951-M and PD6951-L are identical in materials, construction, and performance ratings—both achieve ANSI/ISEA 105 A6 cut resistance and ANSI/ISEA 138 impact compliance. The only difference is the size of the glove, with Medium fitting smaller hand circumferences than Large.

Does the polyurethane coating provide grip in wet conditions?

PU coatings perform well in dry and lightly oily conditions. In wet or heavily oiled environments, a nitrile or foam nitrile coating typically provides better grip retention. If workers regularly handle wet parts or work in rain, consider MCR Safety's nitrile-coated variants for wet-grip performance.

What is the expected service life of these gloves under industrial use?

Service life varies by task abrasiveness, frequency, and care. In moderate-use environments with regular machine washing, the PD6951 series typically delivers significantly longer service life than disposable or light-duty gloves. Inspect the cut-resistant liner, PU coating, and TPR guards before each use; replace if the liner is visibly cut or abraded, or if the TPR guards show cracking or delamination.

Are the PD6951-M gloves tested for puncture resistance?

The HyperMax HPPE shell provides incidental puncture resistance as a property of the fiber, but the PD6951-M is not independently rated or marketed for puncture resistance. For environments with nail, wire, or needle puncture hazards, a glove with a dedicated puncture-resistant rating should be selected.

Can these gloves be ordered in case quantities for fleet programs?

Yes. The PD6951-M is available for purchase in individual pairs and in case quantities suitable for outfitting entire worksite crews. Contact WC Safety's B2B team for volume pricing and fleet management support for large-scale PPE programs.

Is ANSI/ISEA 138 impact compliance required by OSHA?

OSHA does not currently mandate a specific impact glove standard by number, but OSHA 29 CFR 1910.138 requires employers to select hand protection that protects against the hazards present. ANSI/ISEA 138 provides the testing methodology used by safety professionals to document appropriate impact glove selection for hazard abatement programs.