MCR Safety 92743LT-XL CutPro A8 Crinkle Latex Gloves — X-Large

The MCR Safety 92743LT-XL CutPro A8 Crinkle Latex Gloves in X-Large deliver ANSI/ISEA 105 A8 cut protection in a precisely fitted X-Large (size 10) that serves the majority of male workers in heavy metal fabrication, stamping operations, scrap metal handling, and glass manufacturing. The X-Large is the most commonly requested size in the 92743LT series for stamping and fabrication environments, combining the proven HyperMax HPPE A8 shell and crinkle latex grip coating with a fit calibrated for hands measuring approximately 10 inches in circumference. Safety managers building cut-protection programs in metal-intensive industries typically maintain the largest inventory of XL gloves, and the 92743LT-XL delivers the durability and performance to support high-volume deployment at this size.

Key Features

• ANSI/ISEA 105 A8 Cut Resistance: HyperMax HPPE construction achieves the A8 cut level, providing robust protection against stamping die edges, slit metal, scrap profiles, and glass edges.
• X-Large Fit (Size 10): Engineered for hands measuring approximately 10 inches in circumference — the most common size range for adult male workers in heavy industry.
• 13-Gauge HyperMax HPPE Shell: Fine gauge construction balances cut protection with tactile sensitivity, allowing press operators and fabricators to feel part edges and maintain control of workpieces.
• Crinkle Latex Palm Coating: Textured latex channels coolant, lubricant, and water away from the contact surface, maintaining reliable grip on oily or wet metal parts throughout the production shift.
• Seamless Knit Construction: No interior seams reduces pressure points, supporting sustained wear comfort in repetitive-motion stamping and fabrication tasks.
• Breathable Uncoated Back: Open back-of-hand construction dissipates heat and moisture, preventing the discomfort that drives workers to remove PPE in warm manufacturing environments.
• EN 388 Compliant: Meets international cut and mechanical risk standards, suitable for facilities with multi-national safety compliance obligations.

Detailed Description

The 92743LT-XL addresses the core challenge in heavy-fabrication glove programs: finding an A8-rated glove that large-handed workers will actually keep on throughout the shift. Many A8-rated competitors use steel-wire or fiberglass-blended yarns that provide adequate cut performance but create discomfort through fiber rigidity, shedding micro-fibers, or excessive weight — all factors that reduce glove wear compliance in stamping and fabrication environments where shift work and production pressure create temptation to skip PPE.

The HyperMax HPPE fiber used in the 92743LT solves the comfort-performance dilemma. The HPPE fiber achieves A8 through its molecular architecture — ultra-high-molecular-weight polyethylene chains that resist cutting forces — rather than through metallic reinforcement. The result is a glove that is softer against the skin, lighter in weight, and more flexible across hand movement cycles than steel-core A8 alternatives, with equivalent measured cut resistance under ANSI/ISEA 105 testing protocols.

At the XL (size 10) fit level, proper palm width and finger length proportions are critical. The 92743LT-XL is engineered with the wider palm dimensions appropriate for size-10 hands, ensuring the crinkle latex coating makes full contact with the palm during grip. Gloves that are nominally XL but cut narrow can leave gaps in coating contact across the palm, reducing effective grip area on oily or wet workpieces and creating stress concentration points in the HPPE shell.

The crinkle latex coating on the palm and fingers of the 92743LT-XL maintains grip under the oily, wet conditions common in metal stamping — where forming lubricants, hydraulic fluid, and coolant spray contact gloves regularly. The micro-channel texture of crinkle latex creates drainage paths that prevent a continuous fluid film from forming between the glove and workpiece, preserving friction coefficient even when both surfaces are coated with lubricant.

Applications and Use Cases

• Metal Stamping Lines: Blank feeding, part removal, and die-area clearing operations where A8 cut protection is specified for press-area personnel.
• Sheet Metal Fabrication Shops: Handling sheared plate, laser-cut blanks, and plasma-cut structural profiles where edge sharpness is high prior to secondary deburring operations.
• Scrap Metal Processing: Sorting, bundling, and loading irregular scrap steel at service centers, stamping facilities, and recycling operations.
• Glass Manufacturing and Glazing: Handling flat glass panels, insulating glass units, and architectural glass where the combination of weight and sharp edges demands maximum cut protection.
• Steel Service Center Operations: Coil handling, cut-to-length processing, and steel distribution operations where coil OD edges and slit edges present persistent laceration hazards.
• Automotive Body Stamping Plants: Handling body-in-white stampings, sub-frame components, and large body panels prior to automated joining processes.
• Industrial Maintenance in Metal Environments: Maintenance technicians working on stamping equipment, conveyors, and material handling systems in metal fabrication facilities.

Specifications

Related Products

• Cut-Resistant Gloves — Full ANSI A2–A9 cut protection range from light assembly to the most demanding fabrication environments.
• Work Gloves — General-purpose and task-specific work gloves for industrial and construction applications.
• Safety Gloves — Complete safety glove catalog including thermal, impact, and chemical-resistant options.
• Hand Protection — Full hand protection program including cut-resistant sleeves, glove liners, and barrier products.
• MCR Safety Products — Complete MCR Safety line: eye protection, high-vis, rain gear, and FR clothing.
• Leather Work Gloves — Premium leather driver and utility gloves for general heavy-duty industry use.