MCR Safety 9188SFB-XXL CutPro A4 Kevlar Sandy Nitrile Gloves — XX-Large

The MCR Safety 9188SFB-XXL CutPro A4 Kevlar Sandy Nitrile Gloves in XX-Large combine an 18-gauge black Kevlar shell with ANSI/ISEA 105 A4 cut resistance and a sandy nitrile foam palm coating purpose-built for the demanding conditions found in industrial maintenance, metalworking, and HVAC installation — environments where grip in oil, cut protection against metal edges, and durability through rough-surface abrasion all matter simultaneously. SKU: 9188SFB-XXL is engineered to fit XX-Large hands without sacrificing the close conformance that a Kevlar shell requires to provide consistent protection across the full palm and finger surface. The black shell coloration is a practical choice for environments where grease and dark industrial soils are an everyday reality — concealing contamination that would make a grey or white shell appear worn out long before it actually is.

Key Features

• ANSI/ISEA 105 A4 Cut Resistance — Certified cut protection for moderate-to-heavy industrial cut-hazard environments; minimum 1500-gram cut force resistance
• 18-Gauge Black Kevlar Shell — Aramid fiber construction with inherent heat resistance; black coloration resists visible soiling in maintenance environments
• Sandy Nitrile Foam Palm Coating — Foam nitrile with micro-textured surface delivers oil-resistant grip on oily or greasy metal and equipment surfaces
• XX-Large Sizing — Size 11+ shell geometry; purpose-fit for larger hands common in heavy industrial and maintenance trades
• Kevlar Heat Resistance — Kevlar fiber provides incidental contact protection against brief heat exposures in addition to cut protection
• Durable 18-Gauge Construction — Heavier gauge than fine-assembly gloves; optimized for abrasion resistance alongside cut protection
• Seamless Knit Interior — Comfortable extended wear for maintenance technicians performing sustained hand tasks
• Certifications: ANSI/ISEA 105 A4 (Cut); Kevlar provides incidental heat contact protection

Detailed Description

Maintenance and metalworking environments present a fundamentally different cut-hazard profile than electronics assembly or pharmaceutical packaging. Where precision assembly involves occasional contact with sharp edges in largely controlled conditions, maintenance work involves repeated, often unpredictable contact with rough metal edges, rusted fasteners, sharp sheet metal corners, HVAC duct edges, and conduit ends — often in awkward positions, with limited visibility, and in environments contaminated with oils, cutting fluids, and industrial lubricants.

The 9188SFB-XXL is designed from the ground up for these conditions. The 18-gauge Kevlar shell is heavier and more abrasion-resistant than the fine 21-gauge PU gloves suitable for electronics work — a necessary trade-off for environments where the glove surface contacts rough metal, concrete, and contaminated equipment surfaces repeatedly throughout a shift. The sandy nitrile foam coating adds another dimension of performance: foam nitrile compresses slightly on contact with irregular surfaces, increasing grip contact area, while the nitrile chemistry resists degradation from the petroleum-based oils and lubricants that destroy polyurethane coatings quickly in maintenance and machining environments.

The black shell addresses a practical workplace reality that gets insufficient attention in glove selection discussions: appearance-based replacement decisions. In grey or white shells, visible grease and dark contamination cause supervisors to call for glove replacement long before the protective performance has been compromised, driving unnecessary costs and waste. The black Kevlar shell in the 9188SFB-XXL maintains a professional appearance through normal maintenance-environment soiling, ensuring that glove replacement decisions are driven by actual performance inspection (coating integrity, cut-through testing, visible shell damage) rather than cosmetic appearance. For XX-Large workers in maintenance trades — often the most physically demanding roles in a facility — this practical durability is a meaningful value consideration.

Applications and Use Cases

• Industrial Maintenance & Repair: A4 protection and Kevlar durability for handling sheet metal panels, conduit, structural steel, and mechanical equipment components
• HVAC Installation & Service: Sandy nitrile grips ductwork and sheet metal fittings in oily or greasy conditions; cut protection for sheared duct edges and fastener hardware
• Metalworking & Machine Shop Support: Nitrile coating resists cutting fluids and coolants; A4 rating addresses machined part edges and swarf contact
• Pipe Fitting & Plumbing: Grip on threaded fittings, pipe ends, and copper or steel tubing with incidental cut protection from sharp pipe ends and fittings
• Construction & Infrastructure Maintenance: General-purpose cut-resistant work glove for large-handed tradespeople across maintenance, electrical, and mechanical disciplines
• Automotive Maintenance & Fleet Service: Sandy nitrile and Kevlar durability for oil-contaminated engine work, exhaust system service, and body panel handling

Specifications

Related Products

• Cut-Resistant Gloves — Industrial Grade
• Work Gloves for Trades & Maintenance
• Industrial Safety Gloves
• Hand Protection Solutions for Heavy Industry
• MCR Safety Full Collection

Frequently Asked Questions