{"product_id":"msa-safety-hdpe-bump-cap-white","title":"MSA Safety HDPE Bump Cap, White","description":"\u003cp\u003eThe MSA 10033652 is MSA Safety's entry-level HDPE bump cap in white — a non-vented hard plastic shell with a plastic suspension system and integrated sweatband in a standard 6.5–8 inch size range. At $9.19, it is among the lowest-cost bump cap options in MSA's lineup and across the category, suited for high-volume programs where per-unit cost is the primary driver and basic bump and laceration protection from fixed overhead structures is the requirement. For the complete selection of bump caps, see the \u003ca href=\"\/collections\/bump-caps\"\u003ebump caps collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eConstruction and Design\u003c\/h2\u003e\n\u003cp\u003eThe 10033652 shell is formed from high-density polyethylene — the same material used in standard ANSI-rated hard hats at this price tier, injection-molded into a bump cap profile rather than a full hard hat configuration. The shell is non-vented, presenting a continuous surface without airflow openings. The plastic suspension system is a simple strap configuration that holds the shell above the crown of the head, creating a standoff gap that absorbs incidental contact energy from fixed overhead structures. A sweatband is integrated into the suspension for basic hygiene in extended-wear applications. The single White color suits food processing, pharmaceutical, and clean-room environments where white PPE meets facility color-coding or appearance standards. Standard sizing (6.5–8 inches) covers the majority of adult head circumferences without an adjustment mechanism.\u003c\/p\u003e\n\n\u003ch2\u003eCompliance and Ratings\u003c\/h2\u003e\n\u003cp\u003eThe MSA 10033652 bump cap is not rated under ANSI\/ISEA Z89.1. No bump cap meets the impact attenuation, penetration resistance, or electrical protection requirements of Z89.1 — bump caps are a separate product category providing only minor bump and laceration protection from contact with fixed, stationary structures during normal work movement. OSHA 29 CFR 1910.135 and 1926.100 require ANSI Z89.1-compliant hard hats wherever workers face falling object hazards or overhead electrical exposure. Safety managers must conduct a documented hazard assessment confirming the absence of those hazards before specifying bump caps. The 10033652 is appropriate for food and beverage processing environments, light assembly lines, distribution warehousing, and maintenance access in low-clearance spaces where the hazard assessment confirms only incidental contact with fixed overhead structure. For ANSI Z89.1-compliant head protection, see the \u003ca href=\"\/collections\/hard-hats\"\u003ehard hats collection\u003c\/a\u003e and \u003ca href=\"\/collections\/safety-helmets\"\u003esafety helmets collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePerformance Assessment\u003c\/h2\u003e\n\u003cp\u003eThe MSA 10033652's performance case is its cost efficiency: at $9.19 per unit, it is positioned as a consumable replacement item for programs where bump caps are replaced on a scheduled basis or at end of service life. The HDPE shell and plastic suspension provide the baseline bump protection that all bump caps deliver — incidental contact attenuation from stationary structures — without the brim configurations, brand premiums, or accessory ecosystems of higher-priced platforms. The non-vented shell provides no airflow; for environments where ventilation is a priority, MSA's vented bump cap (10033650, Blue, with pinlock suspension) is a separate SKU at a higher price point, though it differs in color, suspension type, and ventilation — not a direct color-only alternative. The white color is the only confirmed option for the 10033652 part number; programs requiring other colors should evaluate alternatives in the \u003ca href=\"\/collections\/bump-caps\"\u003ebump caps collection\u003c\/a\u003e. Stock for this ASIN is currently listed as scarce — verify availability before placing large orders.\u003c\/p\u003e\n\n\u003ch2\u003eStrengths\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLowest-cost MSA bump cap option — $9.19 per unit for high-volume replacement programs\u003c\/li\u003e\n  \u003cli\u003eMSA Safety brand — established industrial safety supplier with full procurement and compliance documentation\u003c\/li\u003e\n  \u003cli\u003eWhite color — meets food processing, pharmaceutical, and clean-room appearance standards\u003c\/li\u003e\n  \u003cli\u003eIntegrated sweatband — basic hygiene support for extended-wear applications\u003c\/li\u003e\n  \u003cli\u003eHDPE shell — durable injection-molded construction suited for standard bump cap service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNot ANSI Z89.1 rated — no falling object, penetration, or electrical protection; hard hat required for those hazards\u003c\/li\u003e\n  \u003cli\u003eSingle color (White) — programs requiring other colors must evaluate alternate products; MSA's Blue bump cap (10033650) differs in suspension type and venting, not just color\u003c\/li\u003e\n  \u003cli\u003eNon-vented — no airflow; vented alternatives are available in the \u003ca href=\"\/collections\/bump-caps\"\u003ebump caps collection\u003c\/a\u003e\n\u003c\/li\u003e\n  \u003cli\u003eStock currently scarce — verify availability before committing to bulk orders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRecommended Use Cases\u003c\/h2\u003e\n\u003cp\u003eThe MSA 10033652 White HDPE Bump Cap is appropriate for food and beverage processing facilities where white PPE meets hygiene appearance standards, pharmaceutical manufacturing environments requiring white headgear, light assembly operations with fixed overhead clearance constraints, and any program where per-unit cost minimization is the primary specification driver. Workers in environments with any falling object or overhead electrical hazard require an ANSI Z89.1 hard hat from the \u003ca href=\"\/collections\/hard-hats\"\u003ehard hats collection\u003c\/a\u003e. For programs requiring vented bump caps, alternate colors, or baseball-style profiles, see the full \u003ca href=\"\/collections\/bump-caps\"\u003ebump caps collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eVerdict\u003c\/h2\u003e\n\u003cp\u003eThe MSA 10033652 is a sub-$10 HDPE bump cap in white from MSA Safety — the correct specification for cost-driven bulk replacement programs in food processing, pharmaceutical, or light industrial environments where white PPE is required and the hazard assessment confirms only incidental contact with fixed overhead structure. Stock is currently scarce; confirm supply before ordering at volume. For the full range of bump cap options across styles, colors, and price points, see the \u003ca href=\"\/collections\/bump-caps\"\u003ebump caps collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"MSA Safety","offers":[{"title":"White","offer_id":44136245264472,"sku":"10033652","price":9.19,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":44136252440664,"sku":"10033650","price":9.19,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":44136252473432,"sku":"10033653","price":9.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/31AZdQe_ecL._SL500_370b7a9d-ee96-43ab-9684-ce270d16555a.jpg?v=1779598141","url":"https:\/\/wcsafety.com\/products\/msa-safety-hdpe-bump-cap-white","provider":"WC Safety","version":"1.0","type":"link"}