MCR Safety PD6901 Predator A9 Hi-Vis Mechanics Gloves

Small-handed workers face the same severe cut and impact hazards as their large-handed colleagues — but are too often issued ill-fitting oversized gloves that compromise both protection and dexterity. The MCR Safety PD6901-S Predator A9 Hi-Vis Mechanics Gloves in Small (SKU: PD6901-S) deliver the complete Predator series specification precisely fitted to the Small hand profile: ANSI/ISEA 105 A9 cut resistance via HyperMax HPPE liner, hi-vis synthetic leather palm grip, and segmented dorsal TPR impact guards. For Small workers in glass handling, metal fabrication, oil and gas field operations, and structural work, the PD6901-S ensures that protection level, fit quality, and impact coverage are identical to what any other size in the PD6901 lineup provides.

Key Features

• ANSI/ISEA 105 Cut Level A9 — highest rated cut protection under US standard
• HyperMax HPPE liner — flexible, high-performance polyethylene A9 cut protection
• Hi-vis synthetic leather palm — durable grip with high-contrast yellow coloring
• Dorsal TPR impact guards — segmented knuckle and proximal finger back coverage
• Hi-vis yellow construction for job-site visibility compliance
• Open-cuff mechanics design with adjustable wrist closure
• Size: Small — precision-fitted for hand circumferences approximately 7–8 inches
• Petroleum and hydraulic fluid resistant construction
• Part of a complete S–XXXL size run for fleet-wide coverage
• Sold as matched right and left pairs

Detailed Description

The Small size is the most under-stocked size category in most industrial glove programs — a practical reality that disproportionately affects women in trades, smaller-statured men, and workers from populations with smaller average hand sizes. Yet the hazards these workers face in glass handling, metal fabrication, and oil field environments are identical in severity to what their larger-handed counterparts encounter. The PD6901-S corrects this gap by providing the full Predator A9 specification in a precision Small cut — palm width, finger length, knuckle span, and wrist opening all proportioned to the Small hand anatomy rather than simply scaled down from a larger pattern.

For Small-handed workers in glass handling roles, the properly fitted PD6901-S provides a meaningful safety advantage over an oversized glove. When a Medium or Large glove is worn on a Small hand, excess material at the fingertips reduces tactile feedback and increases the risk that glass edges contact the palm at a location where the liner is bunched rather than properly tensioned. The PD6901-S's Small-specific liner cut ensures the HPPE fibers are properly distributed across the palm and each finger channel, delivering the A9 cut rating as a functional protection value at every point of potential glass edge contact. For glaziers and installers working with large commercial panels, this fit precision can be the difference between minor and severe hand injuries.

In metal fabrication environments where Small workers operate press brakes, laser cutting tables, and punch presses, the PD6901-S provides the cut protection needed for sheet metal handling alongside dorsal impact protection for the knuckle and finger backs that are most exposed during tooling setup and panel repositioning. The segmented TPR guards on the Small-sized version are scaled to fit the smaller hand's knuckle positions — guards designed for larger hands that find their way onto smaller hands leave critical gaps between the guard edges and the actual knuckle positions, defeating their purpose. The PD6901-S guards align correctly with Small hand anatomy.

The synthetic leather palm on the PD6901-S provides grip performance appropriate for the gripping forces exerted by Small-handed workers, which are typically lower in absolute terms than those of larger-handed workers but still sufficient to require durable palm coverage. Synthetic leather is chosen for its resistance to petroleum product degradation and its consistent abrasion performance across the temperature and humidity ranges encountered in field and shop environments. The hi-vis yellow synthetic leather also ensures that the palm side of the glove contributes to the overall hi-vis appearance, making hand visibility strong from both dorsal and palmar viewing angles.

From a safety program equity standpoint, the availability of the PD6901-S at the same specification level as PD6901-XL and larger is a significant program attribute. Organizations that implement ANSI/ISEA 105 A9 cut protection requirements for specific work tasks — glass handling, structural steel, oilfield pipe work — must provide that protection level to all workers assigned to those tasks, regardless of hand size. The PD6901 series' size range from Small to XXXL means the specification requirement can be met consistently across an entire crew without the need to downgrade to a lower-rated glove just because the correct size isn't available.

Applications and Use Cases

• Glass handling — architectural, commercial, and specialty glass installation
• Metal fabrication — sheet metal handling, press operation, cut steel assembly
• Oil and gas field maintenance — pipe handling and valve work for smaller-handed technicians
• Structural steel assembly and ironwork
• HVAC and ductwork fabrication
• Automotive and industrial manufacturing component handling
• Facilities maintenance — cut hazard work orders
• Women in trades requiring A9 cut and impact protection

Specifications

Related Products

• Cut-Resistant Gloves — Full range of ANSI A1–A9 cut-level gloves across all sizes and materials
• Impact Gloves — Dorsal-protected gloves for knuckle and finger back impact hazards
• Mechanics Gloves — Open-back gloves for mechanical work, tool use, and assembly tasks
• Work Gloves — Comprehensive catalog of industrial and commercial work gloves
• MCR Safety Products — Complete MCR Safety line of hand protection and PPE

FAQ

Why is it important to have a true Small size rather than just issuing a Medium to smaller-handed workers?

A Medium-sized glove on a Small hand is loose at the palm and bunched at the fingertips. This excess material reduces tactile sensitivity, compromises cut resistance by leaving the liner incorrectly tensioned, and increases the risk of the glove catching on equipment during work. For A9 cut protection to perform as rated, the liner must be properly fitted against the hand surface. The PD6901-S provides this correct fit for Small hands.

Is the PD6901-S a good option for women working in fabrication or glass handling?

Yes. The Small size is frequently the best fit for women in trades with hand circumferences in the 7 to 8 inch range. The PD6901-S provides the same A9 cut resistance, dorsal impact guards, and hi-vis construction as the larger sizes. For women with very small hands (under 7 inches), sizing down to an Extra-Small or consulting the MCR Safety size chart is recommended, though S is the most common fit for women in trades.

How tight should the PD6901-S fit to perform correctly?

The glove should fit snugly with no excess material at the fingertips and no tightness that restricts finger flexion. The palm should lay flat against the hand without bunching. The wrist closure should secure the glove without constricting circulation. A well-fitted glove will feel secure during gripping motions and should not shift or partially pull off during tool use. If the glove rotates on the hand during normal work, it is too large.

Are Small-size high-cut gloves harder to find and more expensive than standard sizes?

Small-size high-cut gloves are sometimes understocked at distributors who focus on the most common sizes, but the PD6901-S is a standard catalog item from MCR Safety and is available at the same price point as other sizes in the PD6901 series. WCSafety.com carries the full PD6901 size run to ensure small-handed workers have equal access to the same protection specification as their larger-handed colleagues.

Can the PD6901-S be used for oil field pipe handling tasks?

Yes. Field technicians with small hands involved in pipe handling, valve assembly, and wellhead work benefit from the PD6901-S's A9 cut protection for machined metal edges and thread contacts, the synthetic leather grip for oily and greasy surfaces, and the dorsal impact guards for struck-by events during heavy make-up and break-out operations. The open-cuff design facilitates donning and doffing between hand-intensive and precision tasks.

How do I include the PD6901-S in a diverse workforce glove program?

Conduct hand circumference measurements for all workers assigned to cut and impact hazard tasks. Assign each worker the correct PD6901 size based on their measurement. Order proportional quantities of each size — typically more M, L, and XL than S and XXXL in most industrial workforces, but never zero of the extreme sizes. Standardize on a single product record in your PPE management system for the entire PD6901 family, with size as a tracked attribute per worker.

Does the Small PD6901 have the same impact guard coverage as larger sizes?

Yes. The dorsal TPR impact guards on the PD6901-S are proportionally scaled to the Small hand profile, ensuring the guards align correctly over the knuckle and proximal finger positions of a Small hand. This scaling is a critical design requirement — guards sized for Medium or Large hands would not align correctly on a Small hand and would leave knuckle positions partially unprotected. The PD6901-S provides size-accurate impact guard coverage.

What is the return policy if the PD6901-S does not fit my workers?

WCSafety.com's standard return policy applies to PD6901-S purchases. For new, unopened gloves returned within the return window, credit or exchange is available. For programs where sizing uncertainty is a concern, consider ordering a small trial quantity across adjacent sizes (XS, S, M) before committing to large-volume orders. Measuring workers' hands before ordering is the most reliable approach to minimizing sizing-related returns.