MCR Safety PD4971 Predator A7 Goatskin Impact Gloves

MCR Safety PD4971-S Predator A7 Goatskin Impact Gloves — Small

The MCR Safety PD4971-S Predator A7 Goatskin Impact Gloves in Small bring ANSI/ISEA 105 A7 cut resistance and certified impact protection to workers who require a properly fitted Small-size glove for high-hazard industrial environments. The PD4971 series is engineered to address the dual threat of laceration and blunt force injury, and the Small sizing ensures that smaller-handed workers — including women in trades, apprentices, and lighter-framed industrial personnel — receive the same level of protection as larger-sized counterparts without compromising dexterity or tactile control. Built with a genuine goatskin palm and 360-degree cut-resistant construction, the PD4971-S is a top-tier hand protection solution for oil and gas, metal fabrication, construction, and utilities applications.

Key Features

• ANSI/ISEA 105 A7 Cut Resistance — Maximum cut-protection level under the current standard, confirmed through third-party laboratory testing on the TDM-100 or CPPT protocol.
• Genuine Goatskin Palm — Fine-grain natural leather delivers superior grip, puncture resistance, and tactile sensitivity; conforms to the hand over time without losing structural integrity.
• 360-Degree Cut-Resistant Construction — High-cut-resistance fibers protect the full circumference of the hand, covering dorsal fingers, knuckles, thumb, and back of hand.
• Certified Impact Guards — Dorsal impact padding absorbs and distributes blunt force energy from dropped tools, pinch points, and shifting loads.
• Small Fit for Precision and Comfort — Ergonomic Small sizing reduces excess material that can cause grip fatigue, heat buildup, and reduced finger dexterity in precision tasks.
• MCR Safety Predator Series Quality — Manufactured to the standards of MCR Safety's professional-grade Predator line, with industrial procurement and fleet safety programs in mind.
• Reinforced High-Wear Zones — Critical wear areas including the thumb crotch and index finger are reinforced to extend service life under heavy use.
• Secure Wrist Closure — Wrist design prevents debris ingress and keeps the glove in place during dynamic tool use and material handling tasks.

Detailed Description

MCR Safety's Predator PD4971 is engineered from the ground up for workers who face concurrent cut and impact hazards throughout their shift. The A7 cut resistance designation — the highest tier under ANSI/ISEA 105 — is not a nominal specification but a lab-verified performance level that places the PD4971 among a small category of gloves capable of protecting against the most aggressive industrial cutting hazards. For safety managers and procurement officers building a defensible PPE program, A7-rated gloves provide a clear specification trail that satisfies OSHA 29 CFR 1910.138 requirements for hazard-appropriate hand protection.

The Small sizing of the PD4971-S is not simply a scaled-down version of a larger glove — it is an appropriately patterned fit that maintains protection integrity while accommodating hands with circumferences typically in the 7 to 8 inch range. Poorly fitted gloves are a well-documented contributor to workplace hand injuries: excess material bunches at the fingertips and reduces grip quality, while an overly tight glove restricts circulation and fatigues the hand. The PD4971-S eliminates both problems for workers who need a Small-sized high-protection glove.

Genuine goatskin leather is selected for the palm because it outperforms most synthetic alternatives in the combination of properties that industrial tasks demand: grip texture that works wet or dry, resistance to puncture from wire and fasteners, and the ability to break in and conform to the individual worker's hand. Unlike coated synthetic gloves that can develop stiffness or cracking under repeated chemical or moisture exposure, goatskin remains functional through a long service cycle and can be lightly conditioned to restore suppleness.

The 360-degree cut-resistant shell addresses the statistical reality that hand lacerations occur on all surfaces of the hand, not only the palm. Reaching over sheet metal, guiding cable through conduit, handling glass panels, or working near spinning or reciprocating machinery exposes the back of the hand and dorsal fingers to laceration risks that a palm-only design would leave unprotected. MCR Safety's full-coverage approach with the PD4971 closes that gap. The certified impact guards further address the crush and strike hazards that co-occur with cut risk in most heavy industrial environments.

Applications and Use Cases

The MCR Safety PD4971-S is specified by safety professionals and procurement managers in the following industries and task categories:

• Metal Fabrication — Handling stampings, sheet stock, and machined components where A7 cut resistance is a program requirement.
• Oil and Gas Field Operations — Pipe handling, valve work, wireline, and tool operations combining cut and impact exposure.
• Utilities and Electrical Maintenance — Cable work, conduit handling, substation tasks requiring durable gloves with tactile performance.
• Glass and Mirror Handling — Architectural glass, shower enclosures, and mirror positioning where laceration risk is extreme.
• Construction Trades — Rebar, structural steel, metal studs, and sharp-edged building materials in commercial and industrial construction.
• Waste Handling and Recycling — Sorting mixed materials where unknown blade hazards necessitate maximum cut protection.
• Women in Skilled Trades — Proper Small sizing ensures female tradespeople receive the same A7-rated protection as their co-workers without gloves that are too large to work safely.

Specifications

Related Products

• Cut-Resistant Gloves Collection — Full range of ANSI A1–A9 cut-resistant work gloves for industrial and commercial applications.
• Impact-Resistant Gloves Collection — Certified dorsal impact protection gloves for construction, oil and gas, and manufacturing.
• Work Gloves Collection — General-purpose and specialty hand protection for every worksite.
• MCR Safety Collection — Complete MCR Safety PPE catalog including the full Predator series.
• Mechanics Gloves Collection — Flexible, grip-focused mechanics gloves for assembly, automotive, and maintenance work.
• Leather Work Gloves Collection — Premium goatskin, pigskin, and cowhide gloves for durability-focused applications.

Frequently Asked Questions

Is the PD4971-S the same protection level as the larger sizes?

Yes. The PD4971-S provides the same ANSI/ISEA 105 A7 cut resistance and certified impact protection as all other sizes in the PD4971 series. The only difference is the glove pattern, which is sized for smaller hands. MCR Safety does not reduce protection specifications for smaller sizes.

What hand circumference does the Small size fit?

Small sizing in the MCR Safety PD4971 series typically fits hand circumferences of approximately 7 to 8 inches, measured around the widest part of the palm excluding the thumb. Workers near the boundary between sizes should consider trying both Small and Medium before committing to a fleet order.

Can the PD4971-S be purchased in bulk for a crew?

Yes. WC Safety accommodates bulk and fleet orders for the PD4971-S. Use the quantity selector at checkout or contact the WC Safety sales team for volume pricing inquiries. Mixed-size orders across the PD4971 series can typically be arranged for multi-person safety programs.

Does the goatskin palm hold up to oil and grease?

Goatskin leather is naturally resistant to oils and performs well in greasy or wet conditions common in industrial environments. The fine grain of goatskin maintains grip even with oil film on the surface. Extended saturation in petroleum products will eventually degrade the leather, so gloves should be inspected regularly and replaced when the palm shows significant breakdown.

What is the difference between A7 and lower cut-resistance levels like A4 or A5?

Under ANSI/ISEA 105, higher letter-number combinations indicate higher resistance to blade cutting force. A4 and A5 are appropriate for moderate-to-high cut hazards such as light sheet metal or box-cutting applications. A7 is reserved for the highest blade hazard environments — such as handling glass, stamped metal parts, or sharp cable — and requires a significantly higher force threshold to cut through the material.

Are these gloves appropriate for women in industrial trades?

Yes. The Small sizing of the PD4971-S makes it one of the appropriate choices for women in skilled trades who require properly fitting A7-rated protection. Ill-fitting gloves reduce dexterity, increase fatigue, and can create their own hazards by bunching at fingertips or slipping during use. Proper sizing is a critical component of effective PPE.

How often should the PD4971-S be replaced?

Replacement frequency depends on task intensity, chemical exposure, and individual work habits. Inspect gloves at the start of each shift for cuts in the palm, visible wear in the cut-resistant shell, or impact guard damage. Any glove showing compromised palm integrity, cuts through the cut-resistant material, or separated impact guards should be removed from service immediately.