{"product_id":"lift-safety-dax-cap-style-hard-hat-6-point-suspension","title":"Lift Safety DAX Cap Style Hard Hat, 6-Point Suspension","description":"\u003cp\u003eThe Lift Safety DAX Cap Style Hard Hat is the cap-brim configuration of Lift Safety's DAX platform — a fiber resin shell with a six-point ratchet suspension in a front-brim-only profile suited for environments where full circumferential brim coverage is not required or creates a clearance conflict. The same material and suspension specification as the DAX Full Brim at a slightly lower price entry point, the DAX Cap Style covers general construction, manufacturing, and overhead utility work with ANSI Type 1 Class E compliance and a six-point load distribution system. For workers who need the circumferential coverage of a full brim, the \u003ca href=\"\/collections\/hard-hats\"\u003eLift Safety DAX Full Brim\u003c\/a\u003e is available in the hard hats collection.\u003c\/p\u003e\n\n\u003ch2\u003eConstruction and Design\u003c\/h2\u003e\n\u003cp\u003eThe DAX shell is formed from fiber resin — a fiberglass-reinforced polymer composite that provides higher rigidity and impact resistance than high-density polyethylene at equivalent shell weight. The cap style brim provides front and partial side coverage, leaving the rear and sides of the head without brim deflection — the standard configuration in construction and manufacturing environments where full brim clearance is a practical constraint. The six-point ratchet suspension distributes crown load across six contact points, a meaningful improvement over the four-point systems used in most standard hard hat platforms, and adjusts to head circumference with a single rear ratchet dial. Standard solid color variants (Black, White, Natural) use the fiber resin shell specification at $83–$90. The Matte Black variant (HDCM-17MKG) carries a premium price point ($133) relative to the solid color range and may reflect a different shell construction — verify product specifications on the product detail page before ordering for a specific material requirement.\u003c\/p\u003e\n\n\u003ch2\u003eCompliance and Ratings\u003c\/h2\u003e\n\u003cp\u003eThe Lift Safety DAX Cap Style meets ANSI\/ISEA Z89.1 Type 1, Class E. Type 1 certifies top-of-head impact protection — the standard for general industrial hard hat applications. Class E — Electrical — is the highest dielectric rating under Z89.1 at 20,000 volts phase-to-ground, qualifying the hat for use near exposed conductors. The non-vented shell maintains the continuous dielectric barrier required for Class E certification. Workers who require ANSI Type 2 lateral-impact protection should evaluate \u003ca href=\"\/collections\/safety-helmets\"\u003eType 2 safety helmets\u003c\/a\u003e — the DAX Cap Style is Type 1 only. Workers who need full brim coverage alongside Class E compliance can evaluate the DAX Full Brim or other full brim Class E options in the \u003ca href=\"\/collections\/hard-hats\"\u003ehard hats collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePerformance Assessment\u003c\/h2\u003e\n\u003cp\u003eThe DAX Cap Style's performance advantage over HDPE cap-style hard hats is the same as in the full brim configuration: the fiber resin shell absorbs and distributes point-load impact energy more effectively than HDPE, and the six-point suspension reduces crown pressure concentration over long shifts. Cap style is the preferred configuration in environments with overhead clearance constraints — confined spaces, under machinery, and in applications where a full brim creates contact with structures during normal work postures. At $83–$90 for solid colors, the DAX Cap Style is priced approximately $10–$30 per unit below the DAX Full Brim for comparable colors, reflecting the reduced shell material in the cap-only profile. Three solid colors are available (Natural, White, Black) with consistent Amazon availability; the Matte Black at $133 is an outlier in price and may represent a premium shell material — confirm material specification before ordering for that variant specifically.\u003c\/p\u003e\n\n\u003ch2\u003eStrengths\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFiber resin shell — fiberglass-reinforced composite with higher impact resistance than HDPE\u003c\/li\u003e\n  \u003cli\u003eSix-point ratchet suspension — six-point load distribution for long-shift crown comfort\u003c\/li\u003e\n  \u003cli\u003eClass E dielectric rating — 20,000 V, the highest available under ANSI Z89.1\u003c\/li\u003e\n  \u003cli\u003eCap style profile — reduced footprint versus full brim for overhead clearance-constrained environments\u003c\/li\u003e\n  \u003cli\u003eLower price entry than DAX Full Brim for solid color specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNo rear or side brim coverage — rain, UV, and debris reach the sides and rear of the head; consider \u003ca href=\"\/collections\/hard-hats\"\u003eDAX Full Brim\u003c\/a\u003e if circumferential coverage is required\u003c\/li\u003e\n  \u003cli\u003eANSI Type 1 only — no lateral-impact certification; Type 2 environments require \u003ca href=\"\/collections\/safety-helmets\"\u003esafety helmets\u003c\/a\u003e\n\u003c\/li\u003e\n  \u003cli\u003eLimited color selection — three solid colors plus Matte Black; DAX Full Brim offers ten color and pattern options\u003c\/li\u003e\n  \u003cli\u003eMatte Black variant pricing ($133) is inconsistent with solid color range — verify specifications before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRecommended Use Cases\u003c\/h2\u003e\n\u003cp\u003eThe Lift Safety DAX Cap Style is appropriate for construction laborers, manufacturing workers, electrical contractors, and overhead utility personnel who require Class E dielectric protection with a fiber resin shell in environments where cap style is preferred or required over full brim. Workers in outdoor environments exposed to rain and sun from the sides should evaluate the \u003ca href=\"\/collections\/hard-hats\"\u003eDAX Full Brim\u003c\/a\u003e for complete circumferential coverage. Workers who require Type 2 lateral-impact protection should evaluate \u003ca href=\"\/collections\/safety-helmets\"\u003eType 2 safety helmets\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eVerdict\u003c\/h2\u003e\n\u003cp\u003eThe Lift Safety DAX Cap Style Hard Hat delivers the DAX platform's fiber resin shell and six-point suspension in a cap style profile at a lower per-unit cost than the full brim configuration. It is the correct specification when cap style is required for clearance reasons and Class E dielectric protection is mandatory. For full circumferential brim coverage, the \u003ca href=\"\/collections\/hard-hats\"\u003eLift Safety DAX Full Brim\u003c\/a\u003e is the appropriate alternative. For lateral-impact protection, see the \u003ca href=\"\/collections\/safety-helmets\"\u003esafety helmets collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lift Safety","offers":[{"title":"Natural","offer_id":44136044462168,"sku":"HDFC-17NG","price":82.98,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":44136044494936,"sku":"HDFC-17WG","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":44136044527704,"sku":"HDFC-17KG","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black","offer_id":44136044560472,"sku":"HDCM-17MKG","price":133.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/41OqJVAAazL._SL500.jpg?v=1779588228","url":"https:\/\/wcsafety.com\/products\/lift-safety-dax-cap-style-hard-hat-6-point-suspension","provider":"WC Safety","version":"1.0","type":"link"}