{"product_id":"ergodyne-skullerz-odin-af-anti-fog-safety-glasses","title":"Ergodyne Skullerz ODIN-AF Anti-Fog Safety Glasses — ANSI Z87.1+","description":"\u003cp\u003eThe \u003cstrong\u003eErgodyne 50103 Skullerz ODIN-AF Anti-Fog Safety Glasses\u003c\/strong\u003e are ANSI Z87.1+ rated eye protection in the ODIN frame design with permanent anti-fog lens coating — the fog-resistant configuration of the Skullerz ODIN platform for operations where temperature transitions and humidity cause standard safety glasses to fog and drive non-compliance. The ODIN-AF provides the wraparound coverage and protective specification of the ODIN safety glasses design with the practical fog resistance that makes sustained compliance achievable in cold-chain, food processing, outdoor construction, and high-exertion industrial environments. Permanent anti-fog coating is a manufacturing-level lens treatment that maintains fog resistance throughout the service life of the lens without requiring worker-applied sprays or treatments that degrade and require reapplication.\u003c\/p\u003e\n\n\u003cp\u003eFor safety programs where the ODIN is the standard safety glasses specification and fogging has been identified as a compliance problem in specific operations or areas, the ODIN-AF provides a direct like-for-like substitute that resolves the fogging issue while maintaining frame consistency across the program. Workers transitioning from the standard ODIN to the ODIN-AF experience the same fit and coverage in a fog-resistant configuration.\u003c\/p\u003e\n\n\u003ch2\u003eErgodyne 50103 Skullerz ODIN-AF — Key Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI Z87.1+\u003c\/strong\u003e — high-impact rated safety eyewear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent anti-fog (AF) coating\u003c\/strong\u003e — fog resistance in temperature transitions and high-humidity conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eODIN wraparound frame design\u003c\/strong\u003e — full front and lateral coverage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolycarbonate lens\u003c\/strong\u003e — lightweight high-impact lens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable rubber nose piece\u003c\/strong\u003e — secure fit across diverse facial geometries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber temple tips\u003c\/strong\u003e — non-slip retention for active operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ SKU\u003c\/td\u003e\n\u003ctd\u003e50103\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eErgodyne Skullerz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eANSI Rating\u003c\/td\u003e\n\u003ctd\u003eZ87.1+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Coating\u003c\/td\u003e\n\u003ctd\u003eAnti-fog (AF) permanent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Style\u003c\/td\u003e\n\u003ctd\u003eWraparound full coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNose Piece\u003c\/td\u003e\n\u003ctd\u003eAdjustable rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemple Tips\u003c\/td\u003e\n\u003ctd\u003eRubber overmold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAnti-Fog in Practice: Temperature Transition Environments\u003c\/h2\u003e\n\u003cp\u003eThe industrial settings where safety glasses fogging most commonly drives non-compliance are those with frequent temperature transitions. Cold storage and food processing facilities present the classic fogging scenario: workers enter a refrigerated walk-in cooler or freezer from a production area at ambient temperature, and their safety glasses immediately fog when the colder lens surface contacts the warmer ambient air inside the space (or when they exit back to the warmer area). The fogging is near-instantaneous and complete — within seconds, optical clarity is zero.\u003c\/p\u003e\n\n\u003cp\u003eOther high-fogging environments include outdoor construction in humid summer conditions (perspiration and ambient humidity create persistent low-level fogging throughout the workday), welding and thermal operations (the heat differential between the welding area and surrounding areas creates fogging on glasses worn pre- and post-weld), and general high-exertion operations where body heat and perspiration create sufficient facial moisture to fog lenses.\u003c\/p\u003e\n\n\u003cp\u003eThe ODIN-AF's permanent anti-fog coating eliminates the optical fogging mechanism by making the lens surface hydrophilic. In a temperature transition event, condensation forms on the lens as a thin, optically transparent film rather than the light-scattering droplets that create visual obstruction. The result is a lens that may appear to have condensation on it (the film is present) but remains optically clear for vision purposes — exactly the correct behavior for a safety glasses lens in temperature-variable industrial use.\u003c\/p\u003e\n\n\u003ch2\u003eCompliance and Certifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Z87.1+\u003c\/strong\u003e — high-impact rated safety eyewear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSHA 29 CFR 1910.133\u003c\/strong\u003e — suitable for industrial eye protection programs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent anti-fog coating\u003c\/strong\u003e — sustained fog resistance throughout lens service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eReal-World Benefits\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLike-for-like ODIN substitute for programs adding AF to temperature-variable areas.\u003c\/strong\u003e Programs using the standard ODIN (50003) as their base safety glasses specification and adding anti-fog for specific operations can specify ODIN-AF (50103) for those areas without changing frame geometry or fit. Workers assigned to temperature-variable operations wear the same ODIN frame with the AF lens — fit training, adjustment protocols, and replacement procedures are identical.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eEliminates fogging-related glasses removal in cold-chain and food processing.\u003c\/strong\u003e The primary compliance benefit of anti-fog safety glasses in cold-chain and food processing is the elimination of the specific fogging event that causes workers to remove their glasses. Once fogging is eliminated as a reason to remove glasses, workers in these environments have no functional barrier to continuous wear, and compliance improves. Programs that document the fogging problem before switching to anti-fog eyewear consistently report compliance improvement after the switch.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdjustable fit ensures consistent coverage across diverse workforce face geometries.\u003c\/strong\u003e The ODIN-AF's adjustable rubber nose piece and rubber temple tips accommodate the nose bridge height and head width variation in a typical industrial workforce. Workers who are correctly fitted are less likely to adjust glasses out of position or remove them due to comfort issues — the adjustable elements maximize the proportion of workers who achieve a comfortable, correctly positioned fit from the standard ODIN-AF SKU.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold storage and refrigeration\u003c\/strong\u003e — workers entering and exiting refrigerated areas where fogging is immediate and severe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood processing and beverage manufacturing\u003c\/strong\u003e — high-humidity temperature-variable production environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor construction in humid climates\u003c\/strong\u003e — temperature transitions between outdoor and indoor areas and high exertion fogging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrograms using ODIN as standard — AF configuration for specific zones\u003c\/strong\u003e — operations specifying ODIN-AF for temperature-variable areas within an ODIN-standard program\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompare: Ergodyne 50103 ODIN-AF vs. Standard ODIN\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003evs. Ergodyne 50003 ODIN Safety Glasses\u003c\/strong\u003e — The ODIN (50003) is the same frame without anti-fog coating. Same fit, coverage, and ANSI Z87.1+ rating. Choose ODIN-AF (50103) for fog-prone environments; ODIN (50003) for stable-temperature operations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003evs. Ergodyne 55061 AEGIR-AFAS\u003c\/strong\u003e — The AEGIR-AFAS adds anti-scratch alongside anti-fog in a different blade-style frame. Choose ODIN-AF for the ODIN frame design with anti-fog; choose AEGIR-AFAS for blade-style with combined AF+AS coatings.\u003c\/p\u003e\n\n\u003cp\u003eBrowse the complete \u003ca href=\"\/collections\/safety-glasses\"\u003eSafety Glasses collection\u003c\/a\u003e for the full Skullerz lineup.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the difference between the ODIN-AF (50103) and the standard ODIN (50003)?\u003c\/h3\u003e\n\u003cp\u003eThe ODIN-AF (50103) has permanent anti-fog coating; the ODIN (50003) has standard anti-scratch coating only. The frame design, fit, and ANSI Z87.1+ protection rating are the same for both. Choose ODIN-AF for environments where lens fogging has been identified as a compliance problem; choose ODIN for stable-temperature environments where anti-fog is not required.\u003c\/p\u003e\n\n\u003ch3\u003eHow effective is the ODIN-AF anti-fog coating in extreme cold-to-warm transitions?\u003c\/h3\u003e\n\u003cp\u003ePermanent anti-fog coatings significantly reduce fogging in most cold-to-warm temperature transitions encountered in industrial environments. The coating is designed for conditions typically encountered in food processing and cold chain operations — transitions between refrigerated areas and ambient production environments. In extreme conditions (walk-in freezers at very low temperatures entering very humid environments), some fogging may still occur briefly; the coating substantially reduces the intensity and duration of the fogging event compared to uncoated lenses.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the anti-fog coating affect the ANSI Z87.1+ impact rating?\u003c\/h3\u003e\n\u003cp\u003eNo. The anti-fog coating does not affect the lens's ANSI Z87.1+ impact performance. The coating is a surface treatment applied to the polycarbonate lens; the polycarbonate material itself provides the impact resistance tested under ANSI Z87.1+. The ODIN-AF maintains full ANSI Z87.1+ high-impact rating regardless of the anti-fog coating.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use the ODIN-AF at the same time as a face shield?\u003c\/h3\u003e\n\u003cp\u003eYes. Safety glasses worn under a face shield are required under OSHA 1910.133 for operations where both face and eye protection are needed. The ODIN-AF can be worn beneath a face shield for operations requiring both protection layers. The wraparound design is compatible with standard face shield chin geometry. Check specific face shield and safety glasses compatibility before deployment in combined-protection applications.\u003c\/p\u003e\n","brand":"Ergodyne","offers":[{"title":"Default Title","offer_id":44052752138328,"sku":"50103","price":15.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/51MgAVJbmYL._SX500.jpg?v=1777502088","url":"https:\/\/wcsafety.com\/products\/ergodyne-skullerz-odin-af-anti-fog-safety-glasses","provider":"WC Safety","version":"1.0","type":"link"}