{"title":"Impact-Resistant Gloves","description":"\u003cp\u003eImpact-resistant gloves protect the backs of hands and knuckles from blunt force injuries during demolition, drilling, material handling, mining, oil and gas operations, and any application where the risk of crushing or impact injury to the dorsal hand is significant. ANSI\/ISEA 138-2019 defines three levels of impact protection based on transmitted force measured in the TPE (thermoplastic elastomer) dorsal impact test: Level 1 provides the most basic impact protection; Level 2 covers most industrial applications; Level 3 provides the highest impact resistance for the most demanding oil field and construction applications. WC Safety carries impact-resistant gloves from Mechanix Wear, Portwest, Ergodyne, and Superior Glove in ANSI 138 Impact Level 2 and Level 3 configurations.\u003c\/p\u003e\n\n\u003cp\u003eTPR (thermoplastic rubber) dorsal protection is the primary design feature of impact-resistant gloves — molded rubber pads positioned over the knuckles, metacarpal bones, and finger joints that absorb and distribute impact energy before it can fracture the underlying bones. The thickness, density, and coverage area of the TPR pads determine the impact protection level. Level 2 gloves use pads providing meaningful protection for general construction, logistics, and manufacturing impact risks. Level 3 gloves use thicker, denser TPR construction with extended coverage over the full dorsal hand surface for maximum protection in oil field and mining operations where high-force impacts are more frequent and severe.\u003c\/p\u003e\n\n\u003cp\u003eCombination protection combining impact resistance with cut resistance is available in ANSI A4-A6 cut-rated shells — providing meaningful cut protection alongside impact protection for applications involving both sharp and blunt hazards simultaneously. Glass handling, sheet metal work, and automotive manufacturing frequently present both hazards in the same work cycle, making combination-rated gloves significantly more practical than wearing separate cut gloves and impact gloves simultaneously. Premium combination impact\/cut gloves maintain adequate dexterity for detailed assembly work while providing meaningful protection against both injury mechanisms.\u003c\/p\u003e\n\n\u003cp\u003ePalm and finger coating selection for impact gloves follows the same principles as other work gloves — sandy nitrile for dry grip, foam nitrile for wet grip, uncoated for maximum dexterity. Impact gloves with smooth nitrile palm coating provide adequate grip for most material handling applications. For oily environments in oil and gas applications, full-dip nitrile or foam nitrile palm coatings maintain grip on oily pipe surfaces and equipment in conditions that would cause uncoated or lightly coated gloves to slip. Verify that the palm material is compatible with the specific chemicals and lubricants present in your work environment.\u003c\/p\u003e\n\n\u003cp\u003eGlove fit is particularly important for impact-resistant gloves because the TPR pads must be positioned correctly over the specific anatomical structures they are designed to protect. A glove worn too loosely will have pads that shift away from the knuckles during use, leaving them unprotected during actual impact events. A glove worn too tightly will restrict blood flow and fatigue the hand during sustained grip work. Manufacturer sizing charts based on hand circumference measurement provide the most reliable fit guidance — order samples in adjacent sizes for workers near a size boundary before committing to a bulk order.\u003c\/p\u003e\n\n\u003cp\u003eWC Safety carries ANSI 138 Impact Level 2 and Level 3 gloves in combination cut-rated and standard palm configurations from Mechanix Wear, Portwest, and Superior Glove for oil and gas, construction, mining, and material handling applications. Browse our impact-resistant glove collection to find the right impact protection level and palm material for your specific work environment's hazard profile.\u003c\/p\u003e","products":[{"product_id":"mcr-safety-pd6901s-predator-impact-gloves-small","title":"MCR Safety PD6901S Predator Impact Gloves — Small","description":"\u003c!-- Title: MCR Safety PD6901S Predator Impact Gloves — Small | SKU: PD6901S | ID: 8747191697496 --\u003e\n\n\u003cp\u003eFor Small-handed workers in construction, industrial, and public works operations where high-visibility hand identification is required alongside knuckle and dorsal impact protection, the \u003cstrong\u003eMCR Safety PD6901S Predator A9 Hi-Vis Mechanics Gloves in Small (\u003cstrong\u003eSKU: PD6901S\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD6901's high-visibility Predator platform for 7–8-inch hand circumferences. The PD6901 series addresses the dual requirement for hand visibility and dorsal impact protection in construction and industrial environments where both worker identification and mechanical hand protection are operational requirements.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Small — fits hand circumference approximately 7–8 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis (PD6901)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD6901 series provides high-visibility construction integrated into MCR Safety's Predator impact protection platform, creating a mechanics glove that addresses both the PPE function of dorsal hand protection and the operational function of hand signal visibility and worker identification. In road construction, crane operations, and industrial environments with machine traffic, visible hand positioning reduces accident risk from undetected hand placement near moving equipment and from misread hand signals.\u003c\/p\u003e\n\n\u003cp\u003eFor Small-handed workers, the PD6901S provides high-visibility Predator protection calibrated for the 7–8-inch hand circumference. The TPR guards are positioned for the anatomical knuckle landmarks of Small hands, and the synthetic leather palm coverage is cut to Small-specific dimensions. High-visibility gloves that fit improperly are frequently removed by workers who find them uncomfortable — every removal cycle eliminates both the impact protection and the visibility benefit that justified specifying them.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and public works operations, the PD6901S addresses the specific environment where flaggers, equipment operators, and construction workers operate in close proximity to active vehicle traffic. High-visibility hand gear increases the conspicuity of worker hand positions to vehicle and equipment operators, reducing the risk of undetected proximity incidents.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD6901S provides oil-resistant grip for the range of tools and materials used in construction and industrial operations — from hand tools and pneumatic equipment to structural members and road hardware. The Predator TPR guard coverage protects the dorsal hand surface from the impact events inherent to these environments.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with vehicle traffic — machine signaling and guidance\u003c\/li\u003e\n  \u003cli\u003eCrane and overhead lifting operations — signal work and rigging\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork and structural steel — visibility and impact protection\u003c\/li\u003e\n  \u003cli\u003ePublic works construction — utility, pipeline, and infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction with scaffold and elevated operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD6901S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747191697496\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eSmall (hand circumference 7–8 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis (PD6901)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901S fits Small hands with a circumference of approximately 7–8 inches. The glove is patterned to Small-specific dimensions for proper TPR guard alignment and full hi-vis synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy are high-visibility mechanics gloves specified for construction and road work?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand positions clearly visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers operate near active vehicle traffic. For flaggers, crane signalers, and roadway construction workers, visible hand positioning reduces the risk of signal misinterpretation and proximity incidents.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD6901 appropriate for flagging and traffic control operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD6901S's high-visibility construction makes hand signals clearly visible to vehicle operators and equipment operators in roadway environments. The TPR dorsal guards provide impact protection for the general construction and equipment handling tasks that accompany flagging operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD6901 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes the high-visibility coloring meet ANSI\/ISEA 107 requirements?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 gloves provide high-visibility coloring for hand identification purposes. For formal high-visibility apparel compliance under ANSI\/ISEA 107, consult the product specification or wcsafety.com. For hand signal visibility in construction environments, the PD6901's coloring provides clear conspicuity.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024202952792,"sku":"'PD6901S","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/118167__12928.1738178263.jpg?v=1777006573"},{"product_id":"mcr-safety-pd6901m-predator-impact-gloves-medium","title":"MCR Safety PD6901M Predator Impact Gloves — Medium","description":"\u003c!-- Title: MCR Safety PD6901M Predator Impact Gloves — Medium | SKU: PD6901M | ID: 8747191730264 --\u003e\n\n\u003cp\u003eFor Medium-handed workers in construction, industrial, and public works operations where high-visibility hand identification is required alongside knuckle and dorsal impact protection, the \u003cstrong\u003eMCR Safety PD6901M Predator A9 Hi-Vis Mechanics Gloves in Medium (\u003cstrong\u003eSKU: PD6901M\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD6901's high-visibility Predator platform for 8–9-inch hand circumferences. The PD6901 series addresses the dual requirement for hand visibility and dorsal impact protection in construction and industrial environments where both worker identification and mechanical hand protection are operational requirements.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Medium — fits hand circumference approximately 8–9 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis (PD6901)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD6901 series provides high-visibility construction integrated into MCR Safety's Predator impact protection platform, creating a mechanics glove that addresses both the PPE function of dorsal hand protection and the operational function of hand signal visibility and worker identification. In road construction, crane operations, and industrial environments with machine traffic, visible hand positioning reduces accident risk from undetected hand placement near moving equipment and from misread hand signals.\u003c\/p\u003e\n\n\u003cp\u003eFor Medium-handed workers, the PD6901M provides high-visibility Predator protection calibrated for the 8–9-inch hand circumference. The TPR guards are positioned for the anatomical knuckle landmarks of Medium hands, and the synthetic leather palm coverage is cut to Medium-specific dimensions. High-visibility gloves that fit improperly are frequently removed by workers who find them uncomfortable — every removal cycle eliminates both the impact protection and the visibility benefit that justified specifying them.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and public works operations, the PD6901M addresses the specific environment where flaggers, equipment operators, and construction workers operate in close proximity to active vehicle traffic. High-visibility hand gear increases the conspicuity of worker hand positions to vehicle and equipment operators, reducing the risk of undetected proximity incidents.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD6901M provides oil-resistant grip for the range of tools and materials used in construction and industrial operations — from hand tools and pneumatic equipment to structural members and road hardware. The Predator TPR guard coverage protects the dorsal hand surface from the impact events inherent to these environments.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with vehicle traffic — machine signaling and guidance\u003c\/li\u003e\n  \u003cli\u003eCrane and overhead lifting operations — signal work and rigging\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork and structural steel — visibility and impact protection\u003c\/li\u003e\n  \u003cli\u003ePublic works construction — utility, pipeline, and infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction with scaffold and elevated operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD6901M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747191730264\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eMedium (hand circumference 8–9 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis (PD6901)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901M fits Medium hands with a circumference of approximately 8–9 inches. The glove is patterned to Medium-specific dimensions for proper TPR guard alignment and full hi-vis synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy are high-visibility mechanics gloves specified for construction and road work?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand positions clearly visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers operate near active vehicle traffic. For flaggers, crane signalers, and roadway construction workers, visible hand positioning reduces the risk of signal misinterpretation and proximity incidents.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD6901 appropriate for flagging and traffic control operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD6901M's high-visibility construction makes hand signals clearly visible to vehicle operators and equipment operators in roadway environments. The TPR dorsal guards provide impact protection for the general construction and equipment handling tasks that accompany flagging operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD6901 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes the high-visibility coloring meet ANSI\/ISEA 107 requirements?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 gloves provide high-visibility coloring for hand identification purposes. For formal high-visibility apparel compliance under ANSI\/ISEA 107, consult the product specification or wcsafety.com. For hand signal visibility in construction environments, the PD6901's coloring provides clear conspicuity.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024202985560,"sku":"'PD6901M","price":17.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/118167__12928.1738178263_5b305fe5-f86f-4057-bb83-17ceae4da331.jpg?v=1777006588"},{"product_id":"mcr-safety-pd6901l-predator-impact-gloves-large","title":"MCR Safety PD6901L Predator Impact Gloves — Large","description":"\u003c!-- Title: MCR Safety PD6901L Predator Impact Gloves — Large | SKU: PD6901L | ID: 8747191795800 --\u003e\n\n\u003cp\u003eFor Large-handed workers in construction, industrial, and public works operations where high-visibility hand identification is required alongside knuckle and dorsal impact protection, the \u003cstrong\u003eMCR Safety PD6901L Predator A9 Hi-Vis Mechanics Gloves in Large (\u003cstrong\u003eSKU: PD6901L\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD6901's high-visibility Predator platform for 9–10-inch hand circumferences. The PD6901 series addresses the dual requirement for hand visibility and dorsal impact protection in construction and industrial environments where both worker identification and mechanical hand protection are operational requirements.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Large — fits hand circumference approximately 9–10 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis (PD6901)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD6901 series provides high-visibility construction integrated into MCR Safety's Predator impact protection platform, creating a mechanics glove that addresses both the PPE function of dorsal hand protection and the operational function of hand signal visibility and worker identification. In road construction, crane operations, and industrial environments with machine traffic, visible hand positioning reduces accident risk from undetected hand placement near moving equipment and from misread hand signals.\u003c\/p\u003e\n\n\u003cp\u003eFor Large-handed workers, the PD6901L provides high-visibility Predator protection calibrated for the 9–10-inch hand circumference. The TPR guards are positioned for the anatomical knuckle landmarks of Large hands, and the synthetic leather palm coverage is cut to Large-specific dimensions. High-visibility gloves that fit improperly are frequently removed by workers who find them uncomfortable — every removal cycle eliminates both the impact protection and the visibility benefit that justified specifying them.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and public works operations, the PD6901L addresses the specific environment where flaggers, equipment operators, and construction workers operate in close proximity to active vehicle traffic. High-visibility hand gear increases the conspicuity of worker hand positions to vehicle and equipment operators, reducing the risk of undetected proximity incidents.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD6901L provides oil-resistant grip for the range of tools and materials used in construction and industrial operations — from hand tools and pneumatic equipment to structural members and road hardware. The Predator TPR guard coverage protects the dorsal hand surface from the impact events inherent to these environments.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with vehicle traffic — machine signaling and guidance\u003c\/li\u003e\n  \u003cli\u003eCrane and overhead lifting operations — signal work and rigging\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork and structural steel — visibility and impact protection\u003c\/li\u003e\n  \u003cli\u003ePublic works construction — utility, pipeline, and infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction with scaffold and elevated operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD6901L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747191795800\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eLarge (hand circumference 9–10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis (PD6901)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901L fits Large hands with a circumference of approximately 9–10 inches. The glove is patterned to Large-specific dimensions for proper TPR guard alignment and full hi-vis synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy are high-visibility mechanics gloves specified for construction and road work?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand positions clearly visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers operate near active vehicle traffic. For flaggers, crane signalers, and roadway construction workers, visible hand positioning reduces the risk of signal misinterpretation and proximity incidents.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD6901 appropriate for flagging and traffic control operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD6901L's high-visibility construction makes hand signals clearly visible to vehicle operators and equipment operators in roadway environments. The TPR dorsal guards provide impact protection for the general construction and equipment handling tasks that accompany flagging operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD6901 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes the high-visibility coloring meet ANSI\/ISEA 107 requirements?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 gloves provide high-visibility coloring for hand identification purposes. For formal high-visibility apparel compliance under ANSI\/ISEA 107, consult the product specification or wcsafety.com. For hand signal visibility in construction environments, the PD6901's coloring provides clear conspicuity.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203051096,"sku":"'PD6901L","price":26.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/118167__12928.1738178263_7e2b275a-9a09-45c7-be99-231b2b892282.jpg?v=1777006603"},{"product_id":"mcr-safety-pd6901xl-predator-impact-gloves-x-large","title":"MCR Safety PD6901XL Predator Impact Gloves — X-Large","description":"\u003c!-- Title: MCR Safety PD6901XL Predator Impact Gloves — X-Large | SKU: PD6901XL | ID: 8747191861336 --\u003e\n\n\u003cp\u003eFor X-Large-handed workers in construction, industrial, and public works operations where high-visibility hand identification is required alongside knuckle and dorsal impact protection, the \u003cstrong\u003eMCR Safety PD6901XL Predator A9 Hi-Vis Mechanics Gloves in X-Large (\u003cstrong\u003eSKU: PD6901XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD6901's high-visibility Predator platform for 10–11-inch hand circumferences. The PD6901 series addresses the dual requirement for hand visibility and dorsal impact protection in construction and industrial environments where both worker identification and mechanical hand protection are operational requirements.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: X-Large — fits hand circumference approximately 10–11 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis (PD6901)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD6901 series provides high-visibility construction integrated into MCR Safety's Predator impact protection platform, creating a mechanics glove that addresses both the PPE function of dorsal hand protection and the operational function of hand signal visibility and worker identification. In road construction, crane operations, and industrial environments with machine traffic, visible hand positioning reduces accident risk from undetected hand placement near moving equipment and from misread hand signals.\u003c\/p\u003e\n\n\u003cp\u003eFor X-Large-handed workers, the PD6901XL provides high-visibility Predator protection calibrated for the 10–11-inch hand circumference. The TPR guards are positioned for the anatomical knuckle landmarks of X-Large hands, and the synthetic leather palm coverage is cut to X-Large-specific dimensions. High-visibility gloves that fit improperly are frequently removed by workers who find them uncomfortable — every removal cycle eliminates both the impact protection and the visibility benefit that justified specifying them.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and public works operations, the PD6901XL addresses the specific environment where flaggers, equipment operators, and construction workers operate in close proximity to active vehicle traffic. High-visibility hand gear increases the conspicuity of worker hand positions to vehicle and equipment operators, reducing the risk of undetected proximity incidents.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD6901XL provides oil-resistant grip for the range of tools and materials used in construction and industrial operations — from hand tools and pneumatic equipment to structural members and road hardware. The Predator TPR guard coverage protects the dorsal hand surface from the impact events inherent to these environments.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with vehicle traffic — machine signaling and guidance\u003c\/li\u003e\n  \u003cli\u003eCrane and overhead lifting operations — signal work and rigging\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork and structural steel — visibility and impact protection\u003c\/li\u003e\n  \u003cli\u003ePublic works construction — utility, pipeline, and infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction with scaffold and elevated operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD6901XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747191861336\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eX-Large (hand circumference 10–11 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis (PD6901)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901XL fits X-Large hands with a circumference of approximately 10–11 inches. The glove is patterned to X-Large-specific dimensions for proper TPR guard alignment and full hi-vis synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy are high-visibility mechanics gloves specified for construction and road work?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand positions clearly visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers operate near active vehicle traffic. For flaggers, crane signalers, and roadway construction workers, visible hand positioning reduces the risk of signal misinterpretation and proximity incidents.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD6901 appropriate for flagging and traffic control operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD6901XL's high-visibility construction makes hand signals clearly visible to vehicle operators and equipment operators in roadway environments. The TPR dorsal guards provide impact protection for the general construction and equipment handling tasks that accompany flagging operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD6901 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes the high-visibility coloring meet ANSI\/ISEA 107 requirements?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 gloves provide high-visibility coloring for hand identification purposes. For formal high-visibility apparel compliance under ANSI\/ISEA 107, consult the product specification or wcsafety.com. For hand signal visibility in construction environments, the PD6901's coloring provides clear conspicuity.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203116632,"sku":"'PD6901XL","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/118167__12928.1738178263_affabaab-30e2-49a3-8338-b28e5d5a1b68.jpg?v=1777006618"},{"product_id":"mcr-safety-pd69012xl-predator-impact-gloves-xx-large","title":"MCR Safety PD69012XL Predator Impact Gloves — XX-Large","description":"\u003c!-- Title: MCR Safety PD69012XL Predator Impact Gloves — XX-Large | SKU: PD69012XL | ID: 8747191894104 --\u003e\n\n\u003cp\u003eFor XX-Large-handed workers in construction, industrial, and public works operations where high-visibility hand identification is required alongside knuckle and dorsal impact protection, the \u003cstrong\u003eMCR Safety PD69012XL Predator A9 Hi-Vis Mechanics Gloves in XX-Large (\u003cstrong\u003eSKU: PD69012XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD6901's high-visibility Predator platform for 11–12-inch hand circumferences. The PD6901 series addresses the dual requirement for hand visibility and dorsal impact protection in construction and industrial environments where both worker identification and mechanical hand protection are operational requirements.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XX-Large — fits hand circumference approximately 11–12 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis (PD6901)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD6901 series provides high-visibility construction integrated into MCR Safety's Predator impact protection platform, creating a mechanics glove that addresses both the PPE function of dorsal hand protection and the operational function of hand signal visibility and worker identification. In road construction, crane operations, and industrial environments with machine traffic, visible hand positioning reduces accident risk from undetected hand placement near moving equipment and from misread hand signals.\u003c\/p\u003e\n\n\u003cp\u003eFor XX-Large-handed workers, the PD69012XL provides high-visibility Predator protection calibrated for the 11–12-inch hand circumference. The TPR guards are positioned for the anatomical knuckle landmarks of XX-Large hands, and the synthetic leather palm coverage is cut to XX-Large-specific dimensions. High-visibility gloves that fit improperly are frequently removed by workers who find them uncomfortable — every removal cycle eliminates both the impact protection and the visibility benefit that justified specifying them.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and public works operations, the PD69012XL addresses the specific environment where flaggers, equipment operators, and construction workers operate in close proximity to active vehicle traffic. High-visibility hand gear increases the conspicuity of worker hand positions to vehicle and equipment operators, reducing the risk of undetected proximity incidents.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD69012XL provides oil-resistant grip for the range of tools and materials used in construction and industrial operations — from hand tools and pneumatic equipment to structural members and road hardware. The Predator TPR guard coverage protects the dorsal hand surface from the impact events inherent to these environments.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with vehicle traffic — machine signaling and guidance\u003c\/li\u003e\n  \u003cli\u003eCrane and overhead lifting operations — signal work and rigging\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork and structural steel — visibility and impact protection\u003c\/li\u003e\n  \u003cli\u003ePublic works construction — utility, pipeline, and infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction with scaffold and elevated operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD69012XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747191894104\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXX-Large (hand circumference 11–12 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis (PD6901)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD69012XL fits XX-Large hands with a circumference of approximately 11–12 inches. The glove is patterned to XX-Large-specific dimensions for proper TPR guard alignment and full hi-vis synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy are high-visibility mechanics gloves specified for construction and road work?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand positions clearly visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers operate near active vehicle traffic. For flaggers, crane signalers, and roadway construction workers, visible hand positioning reduces the risk of signal misinterpretation and proximity incidents.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD6901 appropriate for flagging and traffic control operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD69012XL's high-visibility construction makes hand signals clearly visible to vehicle operators and equipment operators in roadway environments. The TPR dorsal guards provide impact protection for the general construction and equipment handling tasks that accompany flagging operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD6901 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes the high-visibility coloring meet ANSI\/ISEA 107 requirements?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 gloves provide high-visibility coloring for hand identification purposes. For formal high-visibility apparel compliance under ANSI\/ISEA 107, consult the product specification or wcsafety.com. For hand signal visibility in construction environments, the PD6901's coloring provides clear conspicuity.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203149400,"sku":"'PD69012XL","price":84.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/118167__12928.1738178263_1198daff-90f3-4b7e-a291-9e931cd115c0.jpg?v=1777006633"},{"product_id":"mcr-safety-pd69013xl-predator-impact-gloves-xxx-large","title":"MCR Safety PD69013XL Predator Impact Gloves — XXX-Large","description":"\u003c!-- Title: MCR Safety PD69013XL Predator Impact Gloves — XXX-Large | SKU: PD69013XL | ID: 8747191926872 --\u003e\n\n\u003cp\u003eFor XXX-Large-handed workers in construction, industrial, and public works operations where high-visibility hand identification is required alongside knuckle and dorsal impact protection, the \u003cstrong\u003eMCR Safety PD69013XL Predator A9 Hi-Vis Mechanics Gloves in XXX-Large (\u003cstrong\u003eSKU: PD69013XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD6901's high-visibility Predator platform for 12–13-inch hand circumferences. The PD6901 series addresses the dual requirement for hand visibility and dorsal impact protection in construction and industrial environments where both worker identification and mechanical hand protection are operational requirements.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XXX-Large — fits hand circumference approximately 12–13 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis (PD6901)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD6901 series provides high-visibility construction integrated into MCR Safety's Predator impact protection platform, creating a mechanics glove that addresses both the PPE function of dorsal hand protection and the operational function of hand signal visibility and worker identification. In road construction, crane operations, and industrial environments with machine traffic, visible hand positioning reduces accident risk from undetected hand placement near moving equipment and from misread hand signals.\u003c\/p\u003e\n\n\u003cp\u003eFor XXX-Large-handed workers, the PD69013XL provides high-visibility Predator protection calibrated for the 12–13-inch hand circumference. The TPR guards are positioned for the anatomical knuckle landmarks of XXX-Large hands, and the synthetic leather palm coverage is cut to XXX-Large-specific dimensions. High-visibility gloves that fit improperly are frequently removed by workers who find them uncomfortable — every removal cycle eliminates both the impact protection and the visibility benefit that justified specifying them.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and public works operations, the PD69013XL addresses the specific environment where flaggers, equipment operators, and construction workers operate in close proximity to active vehicle traffic. High-visibility hand gear increases the conspicuity of worker hand positions to vehicle and equipment operators, reducing the risk of undetected proximity incidents.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD69013XL provides oil-resistant grip for the range of tools and materials used in construction and industrial operations — from hand tools and pneumatic equipment to structural members and road hardware. The Predator TPR guard coverage protects the dorsal hand surface from the impact events inherent to these environments.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with vehicle traffic — machine signaling and guidance\u003c\/li\u003e\n  \u003cli\u003eCrane and overhead lifting operations — signal work and rigging\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork and structural steel — visibility and impact protection\u003c\/li\u003e\n  \u003cli\u003ePublic works construction — utility, pipeline, and infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction with scaffold and elevated operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD69013XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747191926872\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXXX-Large (hand circumference 12–13 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis (PD6901)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD69013XL fits XXX-Large hands with a circumference of approximately 12–13 inches. The glove is patterned to XXX-Large-specific dimensions for proper TPR guard alignment and full hi-vis synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy are high-visibility mechanics gloves specified for construction and road work?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand positions clearly visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers operate near active vehicle traffic. For flaggers, crane signalers, and roadway construction workers, visible hand positioning reduces the risk of signal misinterpretation and proximity incidents.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD6901 appropriate for flagging and traffic control operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD69013XL's high-visibility construction makes hand signals clearly visible to vehicle operators and equipment operators in roadway environments. The TPR dorsal guards provide impact protection for the general construction and equipment handling tasks that accompany flagging operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD6901 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes the high-visibility coloring meet ANSI\/ISEA 107 requirements?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6901 gloves provide high-visibility coloring for hand identification purposes. For formal high-visibility apparel compliance under ANSI\/ISEA 107, consult the product specification or wcsafety.com. For hand signal visibility in construction environments, the PD6901's coloring provides clear conspicuity.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203280472,"sku":"'PD69013XL","price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/118167__12928.1738178263_60df19e6-071b-462f-808d-6d240057bd34.jpg?v=1777006649"},{"product_id":"mcr-safety-pd4900s-predator-impact-gloves-small","title":"MCR Safety PD4900S Predator Impact Gloves — Small","description":"\u003c!-- Title: MCR Safety PD4900S Predator Impact Gloves — Small | SKU: PD4900S | ID: 8747191959640 --\u003e\n\n\u003cp\u003eFor Small-handed first responders, public safety workers, and industrial operations requiring needle stick resistance combined with dorsal impact protection and high-visibility construction, the \u003cstrong\u003eMCR Safety PD4900S Predator A9 Hi-Vis Needle-Resist Gloves in Small (\u003cstrong\u003eSKU: PD4900S\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4900's integrated multi-hazard protection for 7–8-inch hand circumferences. The PD4900 series addresses the hazard profile of law enforcement, corrections, search-and-rescue, and industrial needle-risk environments where needle stick protection, impact absorption, and high-visibility identification are required simultaneously.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Small — fits hand circumference approximately 7–8 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4900 series is designed for the public safety and high-risk industrial market where needle stick injury represents a serious occupational blood-borne pathogen exposure risk. Law enforcement officers, corrections personnel, search-and-rescue teams, and industrial workers in environments with hypodermic needle exposure require gloves that provide needle stick resistance as a primary protection requirement. The PD4900S integrates this protection into the Predator series' impact-protection mechanics glove platform, adding needle resistance without sacrificing the dexterity and protection characteristics of the Predator line.\u003c\/p\u003e\n\n\u003cp\u003eThe high-visibility construction of the PD4900S addresses the situational awareness requirements of public safety operations where hand visibility supports team coordination, command identification, and operational communication in field environments. For emergency response teams working in crowds, low-light environments, or complex incident scenes, high-visibility hand gear improves coordination and reduces misidentification incidents.\u003c\/p\u003e\n\n\u003cp\u003eFor Small-handed workers and responders, the PD4900S provides multi-hazard protection calibrated for the 7–8-inch hand circumference. The needle-resistant layer, impact TPR guards, and high-visibility construction are all sized to Small-specific hand geometry for proper protection effectiveness. A properly fitted PD4900 provides full needle-resistant coverage without gaps at the finger bases or wrist interface where improperly sized gloves can leave unprotected areas.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial environments with needle exposure risk — recycling operations, waste handling, hospital and clinical material processing, and contaminated site remediation — the PD4900S provides the occupational protection combination appropriate for workers handling potentially contaminated sharp materials. The TPR impact guards address the additional mechanical injury risk from the contaminated environments where needle exposure typically occurs, such as compacting equipment operations and manual waste sorting.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLaw enforcement and corrections — needle stick risk in search and apprehension\u003c\/li\u003e\n  \u003cli\u003eSearch and rescue — needle exposure in disaster response environments\u003c\/li\u003e\n  \u003cli\u003eRecycling and waste processing — contaminated sharp material handling\u003c\/li\u003e\n  \u003cli\u003eHospital and clinical material handling — contaminated sharp waste\u003c\/li\u003e\n  \u003cli\u003eContaminated site remediation with sharps exposure\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with needle exposure and impact risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4900S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747191959640\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eSmall (hand circumference 7–8 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900S fits Small hands with a circumference of approximately 7–8 inches. The glove is patterned to Small-specific dimensions for proper needle-resistant coverage, TPR guard alignment, and high-visibility construction.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat type of needle stick protection does the PD4900 provide?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series incorporates a needle-resistant layer designed to resist penetration from hypodermic needles. For specific needle stick resistance performance data, consult the product specification sheet. The needle-resistant construction addresses the occupational blood-borne pathogen exposure risk from hypodermic needle contact in law enforcement, public safety, and industrial environments.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4900 appropriate for law enforcement search operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4900S is designed for law enforcement and corrections applications where needle stick risk during search and apprehension operations creates blood-borne pathogen exposure risk. The high-visibility construction, needle stick protection, and impact guards address the specific hazard profile of these operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4900 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series is available from Small through 4X-Large, covering the full range of hand sizes in public safety and industrial workforces where broader size coverage is required.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD4900 be used in contaminated site remediation?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900S is appropriate for contaminated site work where needle exposure is a documented risk alongside the general mechanical hazards of remediation operations. For sites with chemical or biological contamination beyond needle exposure, additional chemical-resistant gloves or layered PPE may be required based on the specific contamination profile.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203313240,"sku":"'PD4900S","price":37.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/117606__17723.1738178194.jpg?v=1777006665"},{"product_id":"mcr-safety-pd4900m-predator-impact-gloves-medium","title":"MCR Safety PD4900M Predator Impact Gloves — Medium","description":"\u003c!-- Title: MCR Safety PD4900M Predator Impact Gloves — Medium | SKU: PD4900M | ID: 8747192057944 --\u003e\n\n\u003cp\u003eFor Medium-handed first responders, public safety workers, and industrial operations requiring needle stick resistance combined with dorsal impact protection and high-visibility construction, the \u003cstrong\u003eMCR Safety PD4900M Predator A9 Hi-Vis Needle-Resist Gloves in Medium (\u003cstrong\u003eSKU: PD4900M\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4900's integrated multi-hazard protection for 8–9-inch hand circumferences. The PD4900 series addresses the hazard profile of law enforcement, corrections, search-and-rescue, and industrial needle-risk environments where needle stick protection, impact absorption, and high-visibility identification are required simultaneously.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Medium — fits hand circumference approximately 8–9 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4900 series is designed for the public safety and high-risk industrial market where needle stick injury represents a serious occupational blood-borne pathogen exposure risk. Law enforcement officers, corrections personnel, search-and-rescue teams, and industrial workers in environments with hypodermic needle exposure require gloves that provide needle stick resistance as a primary protection requirement. The PD4900M integrates this protection into the Predator series' impact-protection mechanics glove platform, adding needle resistance without sacrificing the dexterity and protection characteristics of the Predator line.\u003c\/p\u003e\n\n\u003cp\u003eThe high-visibility construction of the PD4900M addresses the situational awareness requirements of public safety operations where hand visibility supports team coordination, command identification, and operational communication in field environments. For emergency response teams working in crowds, low-light environments, or complex incident scenes, high-visibility hand gear improves coordination and reduces misidentification incidents.\u003c\/p\u003e\n\n\u003cp\u003eFor Medium-handed workers and responders, the PD4900M provides multi-hazard protection calibrated for the 8–9-inch hand circumference. The needle-resistant layer, impact TPR guards, and high-visibility construction are all sized to Medium-specific hand geometry for proper protection effectiveness. A properly fitted PD4900 provides full needle-resistant coverage without gaps at the finger bases or wrist interface where improperly sized gloves can leave unprotected areas.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial environments with needle exposure risk — recycling operations, waste handling, hospital and clinical material processing, and contaminated site remediation — the PD4900M provides the occupational protection combination appropriate for workers handling potentially contaminated sharp materials. The TPR impact guards address the additional mechanical injury risk from the contaminated environments where needle exposure typically occurs, such as compacting equipment operations and manual waste sorting.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLaw enforcement and corrections — needle stick risk in search and apprehension\u003c\/li\u003e\n  \u003cli\u003eSearch and rescue — needle exposure in disaster response environments\u003c\/li\u003e\n  \u003cli\u003eRecycling and waste processing — contaminated sharp material handling\u003c\/li\u003e\n  \u003cli\u003eHospital and clinical material handling — contaminated sharp waste\u003c\/li\u003e\n  \u003cli\u003eContaminated site remediation with sharps exposure\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with needle exposure and impact risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4900M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192057944\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eMedium (hand circumference 8–9 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900M fits Medium hands with a circumference of approximately 8–9 inches. The glove is patterned to Medium-specific dimensions for proper needle-resistant coverage, TPR guard alignment, and high-visibility construction.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat type of needle stick protection does the PD4900 provide?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series incorporates a needle-resistant layer designed to resist penetration from hypodermic needles. For specific needle stick resistance performance data, consult the product specification sheet. The needle-resistant construction addresses the occupational blood-borne pathogen exposure risk from hypodermic needle contact in law enforcement, public safety, and industrial environments.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4900 appropriate for law enforcement search operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4900M is designed for law enforcement and corrections applications where needle stick risk during search and apprehension operations creates blood-borne pathogen exposure risk. The high-visibility construction, needle stick protection, and impact guards address the specific hazard profile of these operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4900 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series is available from Small through 4X-Large, covering the full range of hand sizes in public safety and industrial workforces where broader size coverage is required.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD4900 be used in contaminated site remediation?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900M is appropriate for contaminated site work where needle exposure is a documented risk alongside the general mechanical hazards of remediation operations. For sites with chemical or biological contamination beyond needle exposure, additional chemical-resistant gloves or layered PPE may be required based on the specific contamination profile.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203444312,"sku":"'PD4900M","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/117606__17723.1738178194_4c32b7b2-d01f-4539-8f2a-86d2e42f8550.jpg?v=1777006680"},{"product_id":"mcr-safety-pd4900l-predator-impact-gloves-large","title":"MCR Safety PD4900L Predator Impact Gloves — Large","description":"\u003c!-- Title: MCR Safety PD4900L Predator Impact Gloves — Large | SKU: PD4900L | ID: 8747192090712 --\u003e\n\n\u003cp\u003eFor Large-handed first responders, public safety workers, and industrial operations requiring needle stick resistance combined with dorsal impact protection and high-visibility construction, the \u003cstrong\u003eMCR Safety PD4900L Predator A9 Hi-Vis Needle-Resist Gloves in Large (\u003cstrong\u003eSKU: PD4900L\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4900's integrated multi-hazard protection for 9–10-inch hand circumferences. The PD4900 series addresses the hazard profile of law enforcement, corrections, search-and-rescue, and industrial needle-risk environments where needle stick protection, impact absorption, and high-visibility identification are required simultaneously.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Large — fits hand circumference approximately 9–10 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4900 series is designed for the public safety and high-risk industrial market where needle stick injury represents a serious occupational blood-borne pathogen exposure risk. Law enforcement officers, corrections personnel, search-and-rescue teams, and industrial workers in environments with hypodermic needle exposure require gloves that provide needle stick resistance as a primary protection requirement. The PD4900L integrates this protection into the Predator series' impact-protection mechanics glove platform, adding needle resistance without sacrificing the dexterity and protection characteristics of the Predator line.\u003c\/p\u003e\n\n\u003cp\u003eThe high-visibility construction of the PD4900L addresses the situational awareness requirements of public safety operations where hand visibility supports team coordination, command identification, and operational communication in field environments. For emergency response teams working in crowds, low-light environments, or complex incident scenes, high-visibility hand gear improves coordination and reduces misidentification incidents.\u003c\/p\u003e\n\n\u003cp\u003eFor Large-handed workers and responders, the PD4900L provides multi-hazard protection calibrated for the 9–10-inch hand circumference. The needle-resistant layer, impact TPR guards, and high-visibility construction are all sized to Large-specific hand geometry for proper protection effectiveness. A properly fitted PD4900 provides full needle-resistant coverage without gaps at the finger bases or wrist interface where improperly sized gloves can leave unprotected areas.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial environments with needle exposure risk — recycling operations, waste handling, hospital and clinical material processing, and contaminated site remediation — the PD4900L provides the occupational protection combination appropriate for workers handling potentially contaminated sharp materials. The TPR impact guards address the additional mechanical injury risk from the contaminated environments where needle exposure typically occurs, such as compacting equipment operations and manual waste sorting.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLaw enforcement and corrections — needle stick risk in search and apprehension\u003c\/li\u003e\n  \u003cli\u003eSearch and rescue — needle exposure in disaster response environments\u003c\/li\u003e\n  \u003cli\u003eRecycling and waste processing — contaminated sharp material handling\u003c\/li\u003e\n  \u003cli\u003eHospital and clinical material handling — contaminated sharp waste\u003c\/li\u003e\n  \u003cli\u003eContaminated site remediation with sharps exposure\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with needle exposure and impact risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4900L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192090712\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eLarge (hand circumference 9–10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900L fits Large hands with a circumference of approximately 9–10 inches. The glove is patterned to Large-specific dimensions for proper needle-resistant coverage, TPR guard alignment, and high-visibility construction.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat type of needle stick protection does the PD4900 provide?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series incorporates a needle-resistant layer designed to resist penetration from hypodermic needles. For specific needle stick resistance performance data, consult the product specification sheet. The needle-resistant construction addresses the occupational blood-borne pathogen exposure risk from hypodermic needle contact in law enforcement, public safety, and industrial environments.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4900 appropriate for law enforcement search operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4900L is designed for law enforcement and corrections applications where needle stick risk during search and apprehension operations creates blood-borne pathogen exposure risk. The high-visibility construction, needle stick protection, and impact guards address the specific hazard profile of these operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4900 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series is available from Small through 4X-Large, covering the full range of hand sizes in public safety and industrial workforces where broader size coverage is required.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD4900 be used in contaminated site remediation?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900L is appropriate for contaminated site work where needle exposure is a documented risk alongside the general mechanical hazards of remediation operations. For sites with chemical or biological contamination beyond needle exposure, additional chemical-resistant gloves or layered PPE may be required based on the specific contamination profile.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203477080,"sku":"'PD4900L","price":17.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/117606__17723.1738178194_c058feef-aaf4-4ba9-be88-7a6a2739ab49.jpg?v=1777006695"},{"product_id":"mcr-safety-pd4900xl-predator-impact-gloves-x-large","title":"MCR Safety PD4900XL Predator Impact Gloves — X-Large","description":"\u003c!-- Title: MCR Safety PD4900XL Predator Impact Gloves — X-Large | SKU: PD4900XL | ID: 8747192123480 --\u003e\n\n\u003cp\u003eFor X-Large-handed first responders, public safety workers, and industrial operations requiring needle stick resistance combined with dorsal impact protection and high-visibility construction, the \u003cstrong\u003eMCR Safety PD4900XL Predator A9 Hi-Vis Needle-Resist Gloves in X-Large (\u003cstrong\u003eSKU: PD4900XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4900's integrated multi-hazard protection for 10–11-inch hand circumferences. The PD4900 series addresses the hazard profile of law enforcement, corrections, search-and-rescue, and industrial needle-risk environments where needle stick protection, impact absorption, and high-visibility identification are required simultaneously.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: X-Large — fits hand circumference approximately 10–11 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4900 series is designed for the public safety and high-risk industrial market where needle stick injury represents a serious occupational blood-borne pathogen exposure risk. Law enforcement officers, corrections personnel, search-and-rescue teams, and industrial workers in environments with hypodermic needle exposure require gloves that provide needle stick resistance as a primary protection requirement. The PD4900XL integrates this protection into the Predator series' impact-protection mechanics glove platform, adding needle resistance without sacrificing the dexterity and protection characteristics of the Predator line.\u003c\/p\u003e\n\n\u003cp\u003eThe high-visibility construction of the PD4900XL addresses the situational awareness requirements of public safety operations where hand visibility supports team coordination, command identification, and operational communication in field environments. For emergency response teams working in crowds, low-light environments, or complex incident scenes, high-visibility hand gear improves coordination and reduces misidentification incidents.\u003c\/p\u003e\n\n\u003cp\u003eFor X-Large-handed workers and responders, the PD4900XL provides multi-hazard protection calibrated for the 10–11-inch hand circumference. The needle-resistant layer, impact TPR guards, and high-visibility construction are all sized to X-Large-specific hand geometry for proper protection effectiveness. A properly fitted PD4900 provides full needle-resistant coverage without gaps at the finger bases or wrist interface where improperly sized gloves can leave unprotected areas.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial environments with needle exposure risk — recycling operations, waste handling, hospital and clinical material processing, and contaminated site remediation — the PD4900XL provides the occupational protection combination appropriate for workers handling potentially contaminated sharp materials. The TPR impact guards address the additional mechanical injury risk from the contaminated environments where needle exposure typically occurs, such as compacting equipment operations and manual waste sorting.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLaw enforcement and corrections — needle stick risk in search and apprehension\u003c\/li\u003e\n  \u003cli\u003eSearch and rescue — needle exposure in disaster response environments\u003c\/li\u003e\n  \u003cli\u003eRecycling and waste processing — contaminated sharp material handling\u003c\/li\u003e\n  \u003cli\u003eHospital and clinical material handling — contaminated sharp waste\u003c\/li\u003e\n  \u003cli\u003eContaminated site remediation with sharps exposure\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with needle exposure and impact risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4900XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192123480\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eX-Large (hand circumference 10–11 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900XL fits X-Large hands with a circumference of approximately 10–11 inches. The glove is patterned to X-Large-specific dimensions for proper needle-resistant coverage, TPR guard alignment, and high-visibility construction.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat type of needle stick protection does the PD4900 provide?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series incorporates a needle-resistant layer designed to resist penetration from hypodermic needles. For specific needle stick resistance performance data, consult the product specification sheet. The needle-resistant construction addresses the occupational blood-borne pathogen exposure risk from hypodermic needle contact in law enforcement, public safety, and industrial environments.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4900 appropriate for law enforcement search operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4900XL is designed for law enforcement and corrections applications where needle stick risk during search and apprehension operations creates blood-borne pathogen exposure risk. The high-visibility construction, needle stick protection, and impact guards address the specific hazard profile of these operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4900 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series is available from Small through 4X-Large, covering the full range of hand sizes in public safety and industrial workforces where broader size coverage is required.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD4900 be used in contaminated site remediation?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900XL is appropriate for contaminated site work where needle exposure is a documented risk alongside the general mechanical hazards of remediation operations. For sites with chemical or biological contamination beyond needle exposure, additional chemical-resistant gloves or layered PPE may be required based on the specific contamination profile.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203509848,"sku":"'PD4900XL","price":43.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/117606__17723.1738178194_a1609a90-523e-4e04-a0f6-b18986bf9f04.jpg?v=1777006710"},{"product_id":"mcr-safety-pd49002xl-predator-impact-gloves-xx-large","title":"MCR Safety PD49002XL Predator Impact Gloves — XX-Large","description":"\u003c!-- Title: MCR Safety PD49002XL Predator Impact Gloves — XX-Large | SKU: PD49002XL | ID: 8747192156248 --\u003e\n\n\u003cp\u003eFor XX-Large-handed first responders, public safety workers, and industrial operations requiring needle stick resistance combined with dorsal impact protection and high-visibility construction, the \u003cstrong\u003eMCR Safety PD49002XL Predator A9 Hi-Vis Needle-Resist Gloves in XX-Large (\u003cstrong\u003eSKU: PD49002XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4900's integrated multi-hazard protection for 11–12-inch hand circumferences. The PD4900 series addresses the hazard profile of law enforcement, corrections, search-and-rescue, and industrial needle-risk environments where needle stick protection, impact absorption, and high-visibility identification are required simultaneously.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XX-Large — fits hand circumference approximately 11–12 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4900 series is designed for the public safety and high-risk industrial market where needle stick injury represents a serious occupational blood-borne pathogen exposure risk. Law enforcement officers, corrections personnel, search-and-rescue teams, and industrial workers in environments with hypodermic needle exposure require gloves that provide needle stick resistance as a primary protection requirement. The PD49002XL integrates this protection into the Predator series' impact-protection mechanics glove platform, adding needle resistance without sacrificing the dexterity and protection characteristics of the Predator line.\u003c\/p\u003e\n\n\u003cp\u003eThe high-visibility construction of the PD49002XL addresses the situational awareness requirements of public safety operations where hand visibility supports team coordination, command identification, and operational communication in field environments. For emergency response teams working in crowds, low-light environments, or complex incident scenes, high-visibility hand gear improves coordination and reduces misidentification incidents.\u003c\/p\u003e\n\n\u003cp\u003eFor XX-Large-handed workers and responders, the PD49002XL provides multi-hazard protection calibrated for the 11–12-inch hand circumference. The needle-resistant layer, impact TPR guards, and high-visibility construction are all sized to XX-Large-specific hand geometry for proper protection effectiveness. A properly fitted PD4900 provides full needle-resistant coverage without gaps at the finger bases or wrist interface where improperly sized gloves can leave unprotected areas.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial environments with needle exposure risk — recycling operations, waste handling, hospital and clinical material processing, and contaminated site remediation — the PD49002XL provides the occupational protection combination appropriate for workers handling potentially contaminated sharp materials. The TPR impact guards address the additional mechanical injury risk from the contaminated environments where needle exposure typically occurs, such as compacting equipment operations and manual waste sorting.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLaw enforcement and corrections — needle stick risk in search and apprehension\u003c\/li\u003e\n  \u003cli\u003eSearch and rescue — needle exposure in disaster response environments\u003c\/li\u003e\n  \u003cli\u003eRecycling and waste processing — contaminated sharp material handling\u003c\/li\u003e\n  \u003cli\u003eHospital and clinical material handling — contaminated sharp waste\u003c\/li\u003e\n  \u003cli\u003eContaminated site remediation with sharps exposure\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with needle exposure and impact risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD49002XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192156248\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXX-Large (hand circumference 11–12 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49002XL fits XX-Large hands with a circumference of approximately 11–12 inches. The glove is patterned to XX-Large-specific dimensions for proper needle-resistant coverage, TPR guard alignment, and high-visibility construction.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat type of needle stick protection does the PD4900 provide?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series incorporates a needle-resistant layer designed to resist penetration from hypodermic needles. For specific needle stick resistance performance data, consult the product specification sheet. The needle-resistant construction addresses the occupational blood-borne pathogen exposure risk from hypodermic needle contact in law enforcement, public safety, and industrial environments.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4900 appropriate for law enforcement search operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD49002XL is designed for law enforcement and corrections applications where needle stick risk during search and apprehension operations creates blood-borne pathogen exposure risk. The high-visibility construction, needle stick protection, and impact guards address the specific hazard profile of these operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4900 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series is available from Small through 4X-Large, covering the full range of hand sizes in public safety and industrial workforces where broader size coverage is required.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD4900 be used in contaminated site remediation?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49002XL is appropriate for contaminated site work where needle exposure is a documented risk alongside the general mechanical hazards of remediation operations. For sites with chemical or biological contamination beyond needle exposure, additional chemical-resistant gloves or layered PPE may be required based on the specific contamination profile.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203542616,"sku":"'PD49002XL","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/117606__17723.1738178194_0b994e8d-f2bb-4389-9373-0a5688b64d99.jpg?v=1777006725"},{"product_id":"mcr-safety-pd49003xl-predator-impact-gloves-xxx-large","title":"MCR Safety PD49003XL Predator Impact Gloves — XXX-Large","description":"\u003c!-- Title: MCR Safety PD49003XL Predator Impact Gloves — XXX-Large | SKU: PD49003XL | ID: 8747192189016 --\u003e\n\n\u003cp\u003eFor XXX-Large-handed first responders, public safety workers, and industrial operations requiring needle stick resistance combined with dorsal impact protection and high-visibility construction, the \u003cstrong\u003eMCR Safety PD49003XL Predator A9 Hi-Vis Needle-Resist Gloves in XXX-Large (\u003cstrong\u003eSKU: PD49003XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4900's integrated multi-hazard protection for 12–13-inch hand circumferences. The PD4900 series addresses the hazard profile of law enforcement, corrections, search-and-rescue, and industrial needle-risk environments where needle stick protection, impact absorption, and high-visibility identification are required simultaneously.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XXX-Large — fits hand circumference approximately 12–13 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4900 series is designed for the public safety and high-risk industrial market where needle stick injury represents a serious occupational blood-borne pathogen exposure risk. Law enforcement officers, corrections personnel, search-and-rescue teams, and industrial workers in environments with hypodermic needle exposure require gloves that provide needle stick resistance as a primary protection requirement. The PD49003XL integrates this protection into the Predator series' impact-protection mechanics glove platform, adding needle resistance without sacrificing the dexterity and protection characteristics of the Predator line.\u003c\/p\u003e\n\n\u003cp\u003eThe high-visibility construction of the PD49003XL addresses the situational awareness requirements of public safety operations where hand visibility supports team coordination, command identification, and operational communication in field environments. For emergency response teams working in crowds, low-light environments, or complex incident scenes, high-visibility hand gear improves coordination and reduces misidentification incidents.\u003c\/p\u003e\n\n\u003cp\u003eFor XXX-Large-handed workers and responders, the PD49003XL provides multi-hazard protection calibrated for the 12–13-inch hand circumference. The needle-resistant layer, impact TPR guards, and high-visibility construction are all sized to XXX-Large-specific hand geometry for proper protection effectiveness. A properly fitted PD4900 provides full needle-resistant coverage without gaps at the finger bases or wrist interface where improperly sized gloves can leave unprotected areas.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial environments with needle exposure risk — recycling operations, waste handling, hospital and clinical material processing, and contaminated site remediation — the PD49003XL provides the occupational protection combination appropriate for workers handling potentially contaminated sharp materials. The TPR impact guards address the additional mechanical injury risk from the contaminated environments where needle exposure typically occurs, such as compacting equipment operations and manual waste sorting.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLaw enforcement and corrections — needle stick risk in search and apprehension\u003c\/li\u003e\n  \u003cli\u003eSearch and rescue — needle exposure in disaster response environments\u003c\/li\u003e\n  \u003cli\u003eRecycling and waste processing — contaminated sharp material handling\u003c\/li\u003e\n  \u003cli\u003eHospital and clinical material handling — contaminated sharp waste\u003c\/li\u003e\n  \u003cli\u003eContaminated site remediation with sharps exposure\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with needle exposure and impact risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD49003XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192189016\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXXX-Large (hand circumference 12–13 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49003XL fits XXX-Large hands with a circumference of approximately 12–13 inches. The glove is patterned to XXX-Large-specific dimensions for proper needle-resistant coverage, TPR guard alignment, and high-visibility construction.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat type of needle stick protection does the PD4900 provide?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series incorporates a needle-resistant layer designed to resist penetration from hypodermic needles. For specific needle stick resistance performance data, consult the product specification sheet. The needle-resistant construction addresses the occupational blood-borne pathogen exposure risk from hypodermic needle contact in law enforcement, public safety, and industrial environments.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4900 appropriate for law enforcement search operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD49003XL is designed for law enforcement and corrections applications where needle stick risk during search and apprehension operations creates blood-borne pathogen exposure risk. The high-visibility construction, needle stick protection, and impact guards address the specific hazard profile of these operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4900 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series is available from Small through 4X-Large, covering the full range of hand sizes in public safety and industrial workforces where broader size coverage is required.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD4900 be used in contaminated site remediation?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49003XL is appropriate for contaminated site work where needle exposure is a documented risk alongside the general mechanical hazards of remediation operations. For sites with chemical or biological contamination beyond needle exposure, additional chemical-resistant gloves or layered PPE may be required based on the specific contamination profile.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203575384,"sku":"'PD49003XL","price":18.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/117606__17723.1738178194_68736527-4c46-430e-af48-e7134d1cb22d.jpg?v=1777006740"},{"product_id":"mcr-safety-pd49004xl-predator-impact-gloves-4x-large","title":"MCR Safety PD49004XL Predator Impact Gloves — 4X-Large","description":"\u003c!-- Title: MCR Safety PD49004XL Predator Impact Gloves — 4X-Large | SKU: PD49004XL | ID: 8747192221784 --\u003e\n\n\u003cp\u003eFor 4X-Large-handed first responders, public safety workers, and industrial operations requiring needle stick resistance combined with dorsal impact protection and high-visibility construction, the \u003cstrong\u003eMCR Safety PD49004XL Predator A9 Hi-Vis Needle-Resist Gloves in 4X-Large (\u003cstrong\u003eSKU: PD49004XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4900's integrated multi-hazard protection for 13–14-inch hand circumferences. The PD4900 series addresses the hazard profile of law enforcement, corrections, search-and-rescue, and industrial needle-risk environments where needle stick protection, impact absorption, and high-visibility identification are required simultaneously.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eHi-Vis Synthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: 4X-Large — fits hand circumference approximately 13–14 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4900 series is designed for the public safety and high-risk industrial market where needle stick injury represents a serious occupational blood-borne pathogen exposure risk. Law enforcement officers, corrections personnel, search-and-rescue teams, and industrial workers in environments with hypodermic needle exposure require gloves that provide needle stick resistance as a primary protection requirement. The PD49004XL integrates this protection into the Predator series' impact-protection mechanics glove platform, adding needle resistance without sacrificing the dexterity and protection characteristics of the Predator line.\u003c\/p\u003e\n\n\u003cp\u003eThe high-visibility construction of the PD49004XL addresses the situational awareness requirements of public safety operations where hand visibility supports team coordination, command identification, and operational communication in field environments. For emergency response teams working in crowds, low-light environments, or complex incident scenes, high-visibility hand gear improves coordination and reduces misidentification incidents.\u003c\/p\u003e\n\n\u003cp\u003eFor 4X-Large-handed workers and responders, the PD49004XL provides multi-hazard protection calibrated for the 13–14-inch hand circumference. The needle-resistant layer, impact TPR guards, and high-visibility construction are all sized to 4X-Large-specific hand geometry for proper protection effectiveness. A properly fitted PD4900 provides full needle-resistant coverage without gaps at the finger bases or wrist interface where improperly sized gloves can leave unprotected areas.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial environments with needle exposure risk — recycling operations, waste handling, hospital and clinical material processing, and contaminated site remediation — the PD49004XL provides the occupational protection combination appropriate for workers handling potentially contaminated sharp materials. The TPR impact guards address the additional mechanical injury risk from the contaminated environments where needle exposure typically occurs, such as compacting equipment operations and manual waste sorting.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLaw enforcement and corrections — needle stick risk in search and apprehension\u003c\/li\u003e\n  \u003cli\u003eSearch and rescue — needle exposure in disaster response environments\u003c\/li\u003e\n  \u003cli\u003eRecycling and waste processing — contaminated sharp material handling\u003c\/li\u003e\n  \u003cli\u003eHospital and clinical material handling — contaminated sharp waste\u003c\/li\u003e\n  \u003cli\u003eContaminated site remediation with sharps exposure\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with needle exposure and impact risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD49004XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192221784\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e4X-Large (hand circumference 13–14 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eHi-Vis Synthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Hi-Vis Needle-Resist (PD4900)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, Needle Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49004XL fits 4X-Large hands with a circumference of approximately 13–14 inches. The glove is patterned to 4X-Large-specific dimensions for proper needle-resistant coverage, TPR guard alignment, and high-visibility construction.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat type of needle stick protection does the PD4900 provide?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series incorporates a needle-resistant layer designed to resist penetration from hypodermic needles. For specific needle stick resistance performance data, consult the product specification sheet. The needle-resistant construction addresses the occupational blood-borne pathogen exposure risk from hypodermic needle contact in law enforcement, public safety, and industrial environments.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4900 appropriate for law enforcement search operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD49004XL is designed for law enforcement and corrections applications where needle stick risk during search and apprehension operations creates blood-borne pathogen exposure risk. The high-visibility construction, needle stick protection, and impact guards address the specific hazard profile of these operations.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4900 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4900 series is available from Small through 4X-Large, covering the full range of hand sizes in public safety and industrial workforces where broader size coverage is required.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD4900 be used in contaminated site remediation?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49004XL is appropriate for contaminated site work where needle exposure is a documented risk alongside the general mechanical hazards of remediation operations. For sites with chemical or biological contamination beyond needle exposure, additional chemical-resistant gloves or layered PPE may be required based on the specific contamination profile.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203608152,"sku":"'PD49004XL","price":11.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/117606__17723.1738178194_596ebced-27ee-487d-950e-f604ca551e9e.jpg?v=1777006755"},{"product_id":"mcr-safety-ff2931s-forceflex-impact-gloves-small","title":"MCR Safety FF2931S ForceFlex Impact Gloves — Small","description":"\u003c!-- Title: MCR Safety FF2931S ForceFlex Impact Gloves — Small | SKU: FF2931S | ID: 8747192254552 --\u003e\n\n\u003cp\u003eFor Small-handed workers requiring a flexible mechanics glove with TPR dorsal impact protection and synthetic leather grip for industrial and construction tasks, the \u003cstrong\u003eMCR Safety FF2931S ForceFlex Impact Gloves in Small (\u003cstrong\u003eSKU: FF2931S\u003c\/strong\u003e)\u003c\/strong\u003e deliver the FF2931's ForceFlex platform in a properly fitted Small format for 7–8-inch hand circumferences. The ForceFlex series prioritizes knuckle and hand movement freedom combined with dorsal TPR protection, making it appropriate for workers who need dexterity and impact protection simultaneously across the varied tasks of their work shift.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Small — fits hand circumference approximately 7–8 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: ForceFlex (FF2931)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe FF2931 series is part of MCR Safety's ForceFlex impact glove platform, which emphasizes the flexibility component of impact-protection mechanics gloves for workers who require dexterity for varied industrial tasks. The spandex-heavy dorsal construction with integrated TPR guards provides four-way stretch that accommodates full knuckle flexion for both precision manipulation and power grip tasks, while the TPR coverage addresses the dorsal impact events that occur throughout the work shift.\u003c\/p\u003e\n\n\u003cp\u003eThe Small format of the FF2931S provides ForceFlex protection calibrated for the 7–8-inch hand circumference. The spandex panel is tensioned for the Small knuckle spacing and the TPR guards are positioned for the anatomical knuckle locations of Small hands, ensuring that the glove delivers its intended protection effectiveness for workers in this hand size range.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial maintenance applications, the FF2931S provides the flexibility needed for workers who move between precision tool work and heavy material handling throughout the day. The flexible construction reduces the glove removal and replacement cycles that occur when workers find impact gloves too restrictive for precision tasks — every cycle where a worker removes their gloves to perform fine-motor work represents a period of unprotected exposure to all the hazards the gloves were designed to prevent.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the FF2931S provides durable, oil-resistant grip for the full range of tools and materials in industrial and construction environments. The flexible palm construction works with the spandex back to provide consistent grip performance across the hand movement range required for mechanics and construction tasks.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial maintenance — mechanical and electrical systems maintenance\u003c\/li\u003e\n  \u003cli\u003eConstruction general labor — mixed task with impact and grip requirements\u003c\/li\u003e\n  \u003cli\u003eWarehouse and distribution — equipment operation and material handling\u003c\/li\u003e\n  \u003cli\u003eUtility maintenance — field infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — light to medium mechanical work\u003c\/li\u003e\n  \u003cli\u003eGeneral manufacturing — assembly and materials handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFF2931S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192254552\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eSmall (hand circumference 7–8 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eForceFlex (FF2931)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2931S fits Small hands with a circumference of approximately 7–8 inches. The glove is patterned to Small-specific dimensions for proper TPR guard alignment and synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the ForceFlex series balance flexibility and impact protection?\u003c\/dt\u003e\n  \u003cdd\u003eForceFlex gloves use a spandex-primary dorsal panel that provides four-way stretch at the knuckles and back of hand, allowing full finger flexion for precision grips. The TPR guards are attached to the flexible spandex in positions that move with the hand rather than restricting its motion. This design provides impact protection without the flexibility restriction that can make workers remove stiff impact gloves for fine-motor tasks.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the FF2931 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2931 series is available from Small through XX-Large, covering the primary hand size range for industrial and construction workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the FF2931 appropriate for construction use?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The FF2931S is appropriate for construction operations where workers need flexibility for varied task performance — operating tools, placing materials, and handling fasteners — combined with dorsal impact protection for the structural contact events inherent to construction work.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip, seams separate, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203640920,"sku":"'FF2931S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/42460__80799.1738178142.jpg?v=1777006770"},{"product_id":"mcr-safety-ff2931m-forceflex-impact-gloves-medium","title":"MCR Safety FF2931M ForceFlex Impact Gloves — Medium","description":"\u003c!-- Title: MCR Safety FF2931M ForceFlex Impact Gloves — Medium | SKU: FF2931M | ID: 8747192287320 --\u003e\n\n\u003cp\u003eFor Medium-handed workers requiring a flexible mechanics glove with TPR dorsal impact protection and synthetic leather grip for industrial and construction tasks, the \u003cstrong\u003eMCR Safety FF2931M ForceFlex Impact Gloves in Medium (\u003cstrong\u003eSKU: FF2931M\u003c\/strong\u003e)\u003c\/strong\u003e deliver the FF2931's ForceFlex platform in a properly fitted Medium format for 8–9-inch hand circumferences. The ForceFlex series prioritizes knuckle and hand movement freedom combined with dorsal TPR protection, making it appropriate for workers who need dexterity and impact protection simultaneously across the varied tasks of their work shift.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Medium — fits hand circumference approximately 8–9 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: ForceFlex (FF2931)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe FF2931 series is part of MCR Safety's ForceFlex impact glove platform, which emphasizes the flexibility component of impact-protection mechanics gloves for workers who require dexterity for varied industrial tasks. The spandex-heavy dorsal construction with integrated TPR guards provides four-way stretch that accommodates full knuckle flexion for both precision manipulation and power grip tasks, while the TPR coverage addresses the dorsal impact events that occur throughout the work shift.\u003c\/p\u003e\n\n\u003cp\u003eThe Medium format of the FF2931M provides ForceFlex protection calibrated for the 8–9-inch hand circumference. The spandex panel is tensioned for the Medium knuckle spacing and the TPR guards are positioned for the anatomical knuckle locations of Medium hands, ensuring that the glove delivers its intended protection effectiveness for workers in this hand size range.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial maintenance applications, the FF2931M provides the flexibility needed for workers who move between precision tool work and heavy material handling throughout the day. The flexible construction reduces the glove removal and replacement cycles that occur when workers find impact gloves too restrictive for precision tasks — every cycle where a worker removes their gloves to perform fine-motor work represents a period of unprotected exposure to all the hazards the gloves were designed to prevent.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the FF2931M provides durable, oil-resistant grip for the full range of tools and materials in industrial and construction environments. The flexible palm construction works with the spandex back to provide consistent grip performance across the hand movement range required for mechanics and construction tasks.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial maintenance — mechanical and electrical systems maintenance\u003c\/li\u003e\n  \u003cli\u003eConstruction general labor — mixed task with impact and grip requirements\u003c\/li\u003e\n  \u003cli\u003eWarehouse and distribution — equipment operation and material handling\u003c\/li\u003e\n  \u003cli\u003eUtility maintenance — field infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — light to medium mechanical work\u003c\/li\u003e\n  \u003cli\u003eGeneral manufacturing — assembly and materials handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFF2931M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192287320\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eMedium (hand circumference 8–9 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eForceFlex (FF2931)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2931M fits Medium hands with a circumference of approximately 8–9 inches. The glove is patterned to Medium-specific dimensions for proper TPR guard alignment and synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the ForceFlex series balance flexibility and impact protection?\u003c\/dt\u003e\n  \u003cdd\u003eForceFlex gloves use a spandex-primary dorsal panel that provides four-way stretch at the knuckles and back of hand, allowing full finger flexion for precision grips. The TPR guards are attached to the flexible spandex in positions that move with the hand rather than restricting its motion. This design provides impact protection without the flexibility restriction that can make workers remove stiff impact gloves for fine-motor tasks.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the FF2931 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2931 series is available from Small through XX-Large, covering the primary hand size range for industrial and construction workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the FF2931 appropriate for construction use?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The FF2931M is appropriate for construction operations where workers need flexibility for varied task performance — operating tools, placing materials, and handling fasteners — combined with dorsal impact protection for the structural contact events inherent to construction work.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip, seams separate, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203673688,"sku":"'FF2931M","price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/42460__80799.1738178142_f4f01c36-2c7b-4f85-afd9-383ef5a97ef6.jpg?v=1777006785"},{"product_id":"mcr-safety-ff2931l-forceflex-impact-gloves-large","title":"MCR Safety FF2931L ForceFlex Impact Gloves — Large","description":"\u003c!-- Title: MCR Safety FF2931L ForceFlex Impact Gloves — Large | SKU: FF2931L | ID: 8747192320088 --\u003e\n\n\u003cp\u003eFor Large-handed workers requiring a flexible mechanics glove with TPR dorsal impact protection and synthetic leather grip for industrial and construction tasks, the \u003cstrong\u003eMCR Safety FF2931L ForceFlex Impact Gloves in Large (\u003cstrong\u003eSKU: FF2931L\u003c\/strong\u003e)\u003c\/strong\u003e deliver the FF2931's ForceFlex platform in a properly fitted Large format for 9–10-inch hand circumferences. The ForceFlex series prioritizes knuckle and hand movement freedom combined with dorsal TPR protection, making it appropriate for workers who need dexterity and impact protection simultaneously across the varied tasks of their work shift.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Large — fits hand circumference approximately 9–10 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: ForceFlex (FF2931)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe FF2931 series is part of MCR Safety's ForceFlex impact glove platform, which emphasizes the flexibility component of impact-protection mechanics gloves for workers who require dexterity for varied industrial tasks. The spandex-heavy dorsal construction with integrated TPR guards provides four-way stretch that accommodates full knuckle flexion for both precision manipulation and power grip tasks, while the TPR coverage addresses the dorsal impact events that occur throughout the work shift.\u003c\/p\u003e\n\n\u003cp\u003eThe Large format of the FF2931L provides ForceFlex protection calibrated for the 9–10-inch hand circumference. The spandex panel is tensioned for the Large knuckle spacing and the TPR guards are positioned for the anatomical knuckle locations of Large hands, ensuring that the glove delivers its intended protection effectiveness for workers in this hand size range.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial maintenance applications, the FF2931L provides the flexibility needed for workers who move between precision tool work and heavy material handling throughout the day. The flexible construction reduces the glove removal and replacement cycles that occur when workers find impact gloves too restrictive for precision tasks — every cycle where a worker removes their gloves to perform fine-motor work represents a period of unprotected exposure to all the hazards the gloves were designed to prevent.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the FF2931L provides durable, oil-resistant grip for the full range of tools and materials in industrial and construction environments. The flexible palm construction works with the spandex back to provide consistent grip performance across the hand movement range required for mechanics and construction tasks.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial maintenance — mechanical and electrical systems maintenance\u003c\/li\u003e\n  \u003cli\u003eConstruction general labor — mixed task with impact and grip requirements\u003c\/li\u003e\n  \u003cli\u003eWarehouse and distribution — equipment operation and material handling\u003c\/li\u003e\n  \u003cli\u003eUtility maintenance — field infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — light to medium mechanical work\u003c\/li\u003e\n  \u003cli\u003eGeneral manufacturing — assembly and materials handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFF2931L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192320088\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eLarge (hand circumference 9–10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eForceFlex (FF2931)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2931L fits Large hands with a circumference of approximately 9–10 inches. The glove is patterned to Large-specific dimensions for proper TPR guard alignment and synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the ForceFlex series balance flexibility and impact protection?\u003c\/dt\u003e\n  \u003cdd\u003eForceFlex gloves use a spandex-primary dorsal panel that provides four-way stretch at the knuckles and back of hand, allowing full finger flexion for precision grips. The TPR guards are attached to the flexible spandex in positions that move with the hand rather than restricting its motion. This design provides impact protection without the flexibility restriction that can make workers remove stiff impact gloves for fine-motor tasks.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the FF2931 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2931 series is available from Small through XX-Large, covering the primary hand size range for industrial and construction workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the FF2931 appropriate for construction use?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The FF2931L is appropriate for construction operations where workers need flexibility for varied task performance — operating tools, placing materials, and handling fasteners — combined with dorsal impact protection for the structural contact events inherent to construction work.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip, seams separate, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203706456,"sku":"'FF2931L","price":17.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/42460__80799.1738178142_c6010564-ecba-4e64-badc-800f7e1231c9.jpg?v=1777006799"},{"product_id":"mcr-safety-ff2931xl-forceflex-impact-gloves-x-large","title":"MCR Safety FF2931XL ForceFlex Impact Gloves — X-Large","description":"\u003c!-- Title: MCR Safety FF2931XL ForceFlex Impact Gloves — X-Large | SKU: FF2931XL | ID: 8747192352856 --\u003e\n\n\u003cp\u003eFor X-Large-handed workers requiring a flexible mechanics glove with TPR dorsal impact protection and synthetic leather grip for industrial and construction tasks, the \u003cstrong\u003eMCR Safety FF2931XL ForceFlex Impact Gloves in X-Large (\u003cstrong\u003eSKU: FF2931XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the FF2931's ForceFlex platform in a properly fitted X-Large format for 10–11-inch hand circumferences. The ForceFlex series prioritizes knuckle and hand movement freedom combined with dorsal TPR protection, making it appropriate for workers who need dexterity and impact protection simultaneously across the varied tasks of their work shift.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: X-Large — fits hand circumference approximately 10–11 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: ForceFlex (FF2931)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe FF2931 series is part of MCR Safety's ForceFlex impact glove platform, which emphasizes the flexibility component of impact-protection mechanics gloves for workers who require dexterity for varied industrial tasks. The spandex-heavy dorsal construction with integrated TPR guards provides four-way stretch that accommodates full knuckle flexion for both precision manipulation and power grip tasks, while the TPR coverage addresses the dorsal impact events that occur throughout the work shift.\u003c\/p\u003e\n\n\u003cp\u003eThe X-Large format of the FF2931XL provides ForceFlex protection calibrated for the 10–11-inch hand circumference. The spandex panel is tensioned for the X-Large knuckle spacing and the TPR guards are positioned for the anatomical knuckle locations of X-Large hands, ensuring that the glove delivers its intended protection effectiveness for workers in this hand size range.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial maintenance applications, the FF2931XL provides the flexibility needed for workers who move between precision tool work and heavy material handling throughout the day. The flexible construction reduces the glove removal and replacement cycles that occur when workers find impact gloves too restrictive for precision tasks — every cycle where a worker removes their gloves to perform fine-motor work represents a period of unprotected exposure to all the hazards the gloves were designed to prevent.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the FF2931XL provides durable, oil-resistant grip for the full range of tools and materials in industrial and construction environments. The flexible palm construction works with the spandex back to provide consistent grip performance across the hand movement range required for mechanics and construction tasks.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial maintenance — mechanical and electrical systems maintenance\u003c\/li\u003e\n  \u003cli\u003eConstruction general labor — mixed task with impact and grip requirements\u003c\/li\u003e\n  \u003cli\u003eWarehouse and distribution — equipment operation and material handling\u003c\/li\u003e\n  \u003cli\u003eUtility maintenance — field infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — light to medium mechanical work\u003c\/li\u003e\n  \u003cli\u003eGeneral manufacturing — assembly and materials handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFF2931XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192352856\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eX-Large (hand circumference 10–11 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eForceFlex (FF2931)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2931XL fits X-Large hands with a circumference of approximately 10–11 inches. The glove is patterned to X-Large-specific dimensions for proper TPR guard alignment and synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the ForceFlex series balance flexibility and impact protection?\u003c\/dt\u003e\n  \u003cdd\u003eForceFlex gloves use a spandex-primary dorsal panel that provides four-way stretch at the knuckles and back of hand, allowing full finger flexion for precision grips. The TPR guards are attached to the flexible spandex in positions that move with the hand rather than restricting its motion. This design provides impact protection without the flexibility restriction that can make workers remove stiff impact gloves for fine-motor tasks.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the FF2931 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2931 series is available from Small through XX-Large, covering the primary hand size range for industrial and construction workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the FF2931 appropriate for construction use?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The FF2931XL is appropriate for construction operations where workers need flexibility for varied task performance — operating tools, placing materials, and handling fasteners — combined with dorsal impact protection for the structural contact events inherent to construction work.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip, seams separate, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203739224,"sku":"'FF2931XL","price":17.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/42460__80799.1738178142_fcf4385d-61d2-49fd-8e04-654e3282bddd.jpg?v=1777006815"},{"product_id":"mcr-safety-ff29312xl-forceflex-impact-gloves-xx-large","title":"MCR Safety FF29312XL ForceFlex Impact Gloves — XX-Large","description":"\u003c!-- Title: MCR Safety FF29312XL ForceFlex Impact Gloves — XX-Large | SKU: FF29312XL | ID: 8747192385624 --\u003e\n\n\u003cp\u003eFor XX-Large-handed workers requiring a flexible mechanics glove with TPR dorsal impact protection and synthetic leather grip for industrial and construction tasks, the \u003cstrong\u003eMCR Safety FF29312XL ForceFlex Impact Gloves in XX-Large (\u003cstrong\u003eSKU: FF29312XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the FF2931's ForceFlex platform in a properly fitted XX-Large format for 11–12-inch hand circumferences. The ForceFlex series prioritizes knuckle and hand movement freedom combined with dorsal TPR protection, making it appropriate for workers who need dexterity and impact protection simultaneously across the varied tasks of their work shift.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XX-Large — fits hand circumference approximately 11–12 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: ForceFlex (FF2931)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe FF2931 series is part of MCR Safety's ForceFlex impact glove platform, which emphasizes the flexibility component of impact-protection mechanics gloves for workers who require dexterity for varied industrial tasks. The spandex-heavy dorsal construction with integrated TPR guards provides four-way stretch that accommodates full knuckle flexion for both precision manipulation and power grip tasks, while the TPR coverage addresses the dorsal impact events that occur throughout the work shift.\u003c\/p\u003e\n\n\u003cp\u003eThe XX-Large format of the FF29312XL provides ForceFlex protection calibrated for the 11–12-inch hand circumference. The spandex panel is tensioned for the XX-Large knuckle spacing and the TPR guards are positioned for the anatomical knuckle locations of XX-Large hands, ensuring that the glove delivers its intended protection effectiveness for workers in this hand size range.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial maintenance applications, the FF29312XL provides the flexibility needed for workers who move between precision tool work and heavy material handling throughout the day. The flexible construction reduces the glove removal and replacement cycles that occur when workers find impact gloves too restrictive for precision tasks — every cycle where a worker removes their gloves to perform fine-motor work represents a period of unprotected exposure to all the hazards the gloves were designed to prevent.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the FF29312XL provides durable, oil-resistant grip for the full range of tools and materials in industrial and construction environments. The flexible palm construction works with the spandex back to provide consistent grip performance across the hand movement range required for mechanics and construction tasks.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial maintenance — mechanical and electrical systems maintenance\u003c\/li\u003e\n  \u003cli\u003eConstruction general labor — mixed task with impact and grip requirements\u003c\/li\u003e\n  \u003cli\u003eWarehouse and distribution — equipment operation and material handling\u003c\/li\u003e\n  \u003cli\u003eUtility maintenance — field infrastructure work\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — light to medium mechanical work\u003c\/li\u003e\n  \u003cli\u003eGeneral manufacturing — assembly and materials handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFF29312XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192385624\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXX-Large (hand circumference 11–12 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eForceFlex (FF2931)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF29312XL fits XX-Large hands with a circumference of approximately 11–12 inches. The glove is patterned to XX-Large-specific dimensions for proper TPR guard alignment and synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the ForceFlex series balance flexibility and impact protection?\u003c\/dt\u003e\n  \u003cdd\u003eForceFlex gloves use a spandex-primary dorsal panel that provides four-way stretch at the knuckles and back of hand, allowing full finger flexion for precision grips. The TPR guards are attached to the flexible spandex in positions that move with the hand rather than restricting its motion. This design provides impact protection without the flexibility restriction that can make workers remove stiff impact gloves for fine-motor tasks.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the FF2931 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2931 series is available from Small through XX-Large, covering the primary hand size range for industrial and construction workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the FF2931 appropriate for construction use?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The FF29312XL is appropriate for construction operations where workers need flexibility for varied task performance — operating tools, placing materials, and handling fasteners — combined with dorsal impact protection for the structural contact events inherent to construction work.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip, seams separate, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203771992,"sku":"'FF29312XL","price":17.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/42460__80799.1738178142_a99dbfca-2976-484b-a370-a7b763fb6ae0.jpg?v=1777006830"},{"product_id":"mcr-safety-pd43612m-predator-impact-gloves-medium","title":"MCR Safety PD43612M Predator Impact Gloves — Medium","description":"\u003c!-- Title: MCR Safety PD43612M Predator Impact Gloves — Medium | SKU: PD43612M | ID: 8747192418392 --\u003e\n\n\u003cp\u003eFor Medium-handed industrial mechanics requiring A9 cut resistance with goatskin leather durability and TPR dorsal impact protection in a single premium mechanics glove, the \u003cstrong\u003eMCR Safety PD43612M Predator A9 Goatskin Kevlar Gloves in Medium (\u003cstrong\u003eSKU: PD43612M\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD43612's triple-protection architecture for 8–9-inch hand circumferences. The combination of A9 cut-rated Kevlar lining, goatskin leather palm, and Predator TPR impact guards addresses the most demanding hand hazard profiles in precision mechanics, sharp-material handling, and heavy industrial assembly where cut, abrasion, and impact risks are simultaneously present.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eGoatskin Leather with Kevlar Lining — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Medium — fits hand circumference approximately 8–9 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Goatskin Kevlar (PD43612)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, ANSI\/ISEA 105 A9 Cut Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD43612 series is designed for applications where the hand hazard profile includes high-grade cut risk from sharp metal edges, significant abrasion from rough surfaces, and impact risk from tool use and structural contact — environments where single-hazard PPE requires workers to change gloves for different phases of work, or compromise protection by choosing a glove that partially addresses the hazard set. The PD43612's integrated A9 cut, goatskin leather, and TPR architecture eliminates this compromise for the most demanding industrial mechanics applications.\u003c\/p\u003e\n\n\u003cp\u003eGoatskin leather is the premium natural leather choice for precision mechanics applications because of its combination of durability, oil resistance, and tactile sensitivity. Goatskin is thinner and more supple than cowhide or pigskin leather while maintaining superior abrasion resistance, allowing the wearer to feel tool handles and components through the palm material. For precision mechanical work — thread engagement, fastener torque sensing, valve actuation — this tactile feedback is operationally important. The PD43612M goatskin palm provides this sensitivity while meeting the heavy abrasion demands of construction and industrial mechanics.\u003c\/p\u003e\n\n\u003cp\u003eThe A9 Kevlar lining of the PD43612M provides the highest cut resistance classification under ANSI\/ISEA 105 — the specification appropriate for metal stamping work, glass handling, laser-cut metal edge handling, and any application where sustained contact with sharp edges creates significant laceration risk. The Kevlar lining is integrated into the glove construction beneath the goatskin palm and around the finger surfaces, providing complete cut coverage without reducing the goatskin's dexterity contribution.\u003c\/p\u003e\n\n\u003cp\u003eFor Medium-handed workers, the PD43612M provides properly scaled multi-hazard protection for the 8–9-inch hand circumference. The goatskin palm panels are cut to Medium-specific dimensions, the Kevlar lining covers the complete finger and palm surface, and the TPR guards are positioned at the correct anatomical knuckle locations for Medium hands. This multi-layer, size-calibrated construction is what enables the PD43612 to deliver its full protection specification in real-world use.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal fabrication — laser-cut and stamped edge handling requiring A9 cut protection\u003c\/li\u003e\n  \u003cli\u003ePrecision automotive mechanics — engine work with sharp component edges\u003c\/li\u003e\n  \u003cli\u003eIndustrial assembly — high-cut-hazard component handling with impact risk\u003c\/li\u003e\n  \u003cli\u003eGlass installation and handling — cut and impact dual protection\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction — sharp material handling with impact exposure\u003c\/li\u003e\n  \u003cli\u003eHeavy construction — sharp structural material with combined hazard profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD43612M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192418392\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eMedium (hand circumference 8–9 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eGoatskin Leather with Kevlar Lining\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Goatskin Kevlar (PD43612)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, ANSI\/ISEA 105 A9 Cut Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD43612M fits Medium hands with a circumference of approximately 8–9 inches. The glove is patterned to Medium-specific dimensions for proper goatskin palm coverage, Kevlar lining protection, and TPR guard alignment.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat is A9 cut resistance?\u003c\/dt\u003e\n  \u003cdd\u003eA9 is the highest cut resistance level under ANSI\/ISEA 105, requiring the glove material to withstand a blade force exceeding 6,000 grams before cutting through. A9 is appropriate for applications with sharp metal edges, glass, and other cutting surfaces where lower cut resistance levels would be exceeded by the hazard exposure.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy is goatskin leather preferred for precision mechanics over synthetic alternatives?\u003c\/dt\u003e\n  \u003cdd\u003eGoatskin leather is thinner and more supple than cowhide or synthetic alternatives while maintaining superior abrasion resistance. This combination provides tactile sensitivity for tool feel and component feedback that is operationally important in precision mechanics work, while durability for the abrasion exposure of construction and industrial maintenance.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD43612 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD43612 series is available from Medium through XX-Large in this listing, providing coverage for the primary hand size range. Contact wcsafety.com for complete size availability.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD43612 be used for glass handling operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD43612M's A9 Kevlar lining provides the cut resistance appropriate for glass handling where edge laceration is the primary hazard, and the TPR guards protect against the impact events that occur during glass panel handling and installation.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203804760,"sku":"'PD43612M","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/PD43612-360-C01__15000.1761228033.jpg?v=1777006845"},{"product_id":"mcr-safety-pd43612l-predator-impact-gloves-large","title":"MCR Safety PD43612L Predator Impact Gloves — Large","description":"\u003c!-- Title: MCR Safety PD43612L Predator Impact Gloves — Large | SKU: PD43612L | ID: 8747192451160 --\u003e\n\n\u003cp\u003eFor Large-handed industrial mechanics requiring A9 cut resistance with goatskin leather durability and TPR dorsal impact protection in a single premium mechanics glove, the \u003cstrong\u003eMCR Safety PD43612L Predator A9 Goatskin Kevlar Gloves in Large (\u003cstrong\u003eSKU: PD43612L\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD43612's triple-protection architecture for 9–10-inch hand circumferences. The combination of A9 cut-rated Kevlar lining, goatskin leather palm, and Predator TPR impact guards addresses the most demanding hand hazard profiles in precision mechanics, sharp-material handling, and heavy industrial assembly where cut, abrasion, and impact risks are simultaneously present.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eGoatskin Leather with Kevlar Lining — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Large — fits hand circumference approximately 9–10 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Goatskin Kevlar (PD43612)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, ANSI\/ISEA 105 A9 Cut Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD43612 series is designed for applications where the hand hazard profile includes high-grade cut risk from sharp metal edges, significant abrasion from rough surfaces, and impact risk from tool use and structural contact — environments where single-hazard PPE requires workers to change gloves for different phases of work, or compromise protection by choosing a glove that partially addresses the hazard set. The PD43612's integrated A9 cut, goatskin leather, and TPR architecture eliminates this compromise for the most demanding industrial mechanics applications.\u003c\/p\u003e\n\n\u003cp\u003eGoatskin leather is the premium natural leather choice for precision mechanics applications because of its combination of durability, oil resistance, and tactile sensitivity. Goatskin is thinner and more supple than cowhide or pigskin leather while maintaining superior abrasion resistance, allowing the wearer to feel tool handles and components through the palm material. For precision mechanical work — thread engagement, fastener torque sensing, valve actuation — this tactile feedback is operationally important. The PD43612L goatskin palm provides this sensitivity while meeting the heavy abrasion demands of construction and industrial mechanics.\u003c\/p\u003e\n\n\u003cp\u003eThe A9 Kevlar lining of the PD43612L provides the highest cut resistance classification under ANSI\/ISEA 105 — the specification appropriate for metal stamping work, glass handling, laser-cut metal edge handling, and any application where sustained contact with sharp edges creates significant laceration risk. The Kevlar lining is integrated into the glove construction beneath the goatskin palm and around the finger surfaces, providing complete cut coverage without reducing the goatskin's dexterity contribution.\u003c\/p\u003e\n\n\u003cp\u003eFor Large-handed workers, the PD43612L provides properly scaled multi-hazard protection for the 9–10-inch hand circumference. The goatskin palm panels are cut to Large-specific dimensions, the Kevlar lining covers the complete finger and palm surface, and the TPR guards are positioned at the correct anatomical knuckle locations for Large hands. This multi-layer, size-calibrated construction is what enables the PD43612 to deliver its full protection specification in real-world use.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal fabrication — laser-cut and stamped edge handling requiring A9 cut protection\u003c\/li\u003e\n  \u003cli\u003ePrecision automotive mechanics — engine work with sharp component edges\u003c\/li\u003e\n  \u003cli\u003eIndustrial assembly — high-cut-hazard component handling with impact risk\u003c\/li\u003e\n  \u003cli\u003eGlass installation and handling — cut and impact dual protection\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction — sharp material handling with impact exposure\u003c\/li\u003e\n  \u003cli\u003eHeavy construction — sharp structural material with combined hazard profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD43612L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192451160\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eLarge (hand circumference 9–10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eGoatskin Leather with Kevlar Lining\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Goatskin Kevlar (PD43612)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, ANSI\/ISEA 105 A9 Cut Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD43612L fits Large hands with a circumference of approximately 9–10 inches. The glove is patterned to Large-specific dimensions for proper goatskin palm coverage, Kevlar lining protection, and TPR guard alignment.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat is A9 cut resistance?\u003c\/dt\u003e\n  \u003cdd\u003eA9 is the highest cut resistance level under ANSI\/ISEA 105, requiring the glove material to withstand a blade force exceeding 6,000 grams before cutting through. A9 is appropriate for applications with sharp metal edges, glass, and other cutting surfaces where lower cut resistance levels would be exceeded by the hazard exposure.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy is goatskin leather preferred for precision mechanics over synthetic alternatives?\u003c\/dt\u003e\n  \u003cdd\u003eGoatskin leather is thinner and more supple than cowhide or synthetic alternatives while maintaining superior abrasion resistance. This combination provides tactile sensitivity for tool feel and component feedback that is operationally important in precision mechanics work, while durability for the abrasion exposure of construction and industrial maintenance.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD43612 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD43612 series is available from Medium through XX-Large in this listing, providing coverage for the primary hand size range. Contact wcsafety.com for complete size availability.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD43612 be used for glass handling operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD43612L's A9 Kevlar lining provides the cut resistance appropriate for glass handling where edge laceration is the primary hazard, and the TPR guards protect against the impact events that occur during glass panel handling and installation.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203837528,"sku":"'PD43612L","price":72.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/PD43612-360-C01__15000.1761228033_adbf7b80-177e-420a-af0d-fac995c48b14.jpg?v=1777006860"},{"product_id":"mcr-safety-pd43612xl-predator-impact-gloves-xx-large","title":"MCR Safety PD43612XL Predator Impact Gloves — XX-Large","description":"\u003c!-- Title: MCR Safety PD43612XL Predator Impact Gloves — XX-Large | SKU: PD43612XL | ID: 8747192516696 --\u003e\n\n\u003cp\u003eFor XX-Large-handed industrial mechanics requiring A9 cut resistance with goatskin leather durability and TPR dorsal impact protection in a single premium mechanics glove, the \u003cstrong\u003eMCR Safety PD43612XL Predator A9 Goatskin Kevlar Gloves in XX-Large (\u003cstrong\u003eSKU: PD43612XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD43612's triple-protection architecture for 11–12-inch hand circumferences. The combination of A9 cut-rated Kevlar lining, goatskin leather palm, and Predator TPR impact guards addresses the most demanding hand hazard profiles in precision mechanics, sharp-material handling, and heavy industrial assembly where cut, abrasion, and impact risks are simultaneously present.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eGoatskin Leather with Kevlar Lining — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XX-Large — fits hand circumference approximately 11–12 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Goatskin Kevlar (PD43612)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, ANSI\/ISEA 105 A9 Cut Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD43612 series is designed for applications where the hand hazard profile includes high-grade cut risk from sharp metal edges, significant abrasion from rough surfaces, and impact risk from tool use and structural contact — environments where single-hazard PPE requires workers to change gloves for different phases of work, or compromise protection by choosing a glove that partially addresses the hazard set. The PD43612's integrated A9 cut, goatskin leather, and TPR architecture eliminates this compromise for the most demanding industrial mechanics applications.\u003c\/p\u003e\n\n\u003cp\u003eGoatskin leather is the premium natural leather choice for precision mechanics applications because of its combination of durability, oil resistance, and tactile sensitivity. Goatskin is thinner and more supple than cowhide or pigskin leather while maintaining superior abrasion resistance, allowing the wearer to feel tool handles and components through the palm material. For precision mechanical work — thread engagement, fastener torque sensing, valve actuation — this tactile feedback is operationally important. The PD43612XL goatskin palm provides this sensitivity while meeting the heavy abrasion demands of construction and industrial mechanics.\u003c\/p\u003e\n\n\u003cp\u003eThe A9 Kevlar lining of the PD43612XL provides the highest cut resistance classification under ANSI\/ISEA 105 — the specification appropriate for metal stamping work, glass handling, laser-cut metal edge handling, and any application where sustained contact with sharp edges creates significant laceration risk. The Kevlar lining is integrated into the glove construction beneath the goatskin palm and around the finger surfaces, providing complete cut coverage without reducing the goatskin's dexterity contribution.\u003c\/p\u003e\n\n\u003cp\u003eFor XX-Large-handed workers, the PD43612XL provides properly scaled multi-hazard protection for the 11–12-inch hand circumference. The goatskin palm panels are cut to XX-Large-specific dimensions, the Kevlar lining covers the complete finger and palm surface, and the TPR guards are positioned at the correct anatomical knuckle locations for XX-Large hands. This multi-layer, size-calibrated construction is what enables the PD43612 to deliver its full protection specification in real-world use.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal fabrication — laser-cut and stamped edge handling requiring A9 cut protection\u003c\/li\u003e\n  \u003cli\u003ePrecision automotive mechanics — engine work with sharp component edges\u003c\/li\u003e\n  \u003cli\u003eIndustrial assembly — high-cut-hazard component handling with impact risk\u003c\/li\u003e\n  \u003cli\u003eGlass installation and handling — cut and impact dual protection\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction — sharp material handling with impact exposure\u003c\/li\u003e\n  \u003cli\u003eHeavy construction — sharp structural material with combined hazard profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD43612XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747192516696\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXX-Large (hand circumference 11–12 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eGoatskin Leather with Kevlar Lining\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Goatskin Kevlar (PD43612)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, ANSI\/ISEA 105 A9 Cut Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD43612XL fits XX-Large hands with a circumference of approximately 11–12 inches. The glove is patterned to XX-Large-specific dimensions for proper goatskin palm coverage, Kevlar lining protection, and TPR guard alignment.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat is A9 cut resistance?\u003c\/dt\u003e\n  \u003cdd\u003eA9 is the highest cut resistance level under ANSI\/ISEA 105, requiring the glove material to withstand a blade force exceeding 6,000 grams before cutting through. A9 is appropriate for applications with sharp metal edges, glass, and other cutting surfaces where lower cut resistance levels would be exceeded by the hazard exposure.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy is goatskin leather preferred for precision mechanics over synthetic alternatives?\u003c\/dt\u003e\n  \u003cdd\u003eGoatskin leather is thinner and more supple than cowhide or synthetic alternatives while maintaining superior abrasion resistance. This combination provides tactile sensitivity for tool feel and component feedback that is operationally important in precision mechanics work, while durability for the abrasion exposure of construction and industrial maintenance.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD43612 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD43612 series is available from Medium through XX-Large in this listing, providing coverage for the primary hand size range. Contact wcsafety.com for complete size availability.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD43612 be used for glass handling operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD43612XL's A9 Kevlar lining provides the cut resistance appropriate for glass handling where edge laceration is the primary hazard, and the TPR guards protect against the impact events that occur during glass panel handling and installation.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024203903064,"sku":"'PD43612XL","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/PD43612-360-C01__15000.1761228033_89a6ce84-39c7-44e4-8207-03341d31e656.jpg?v=1777006875"},{"product_id":"mcr-safety-pd436122xl-predator-impact-gloves-xx-large","title":"MCR Safety PD436122XL Predator Impact Gloves — XX-Large","description":"\u003c!-- Title: MCR Safety PD436122XL Predator Impact Gloves — XX-Large | SKU: PD436122XL | ID: 8747226333272 --\u003e\n\n\u003cp\u003eFor XX-Large-handed industrial mechanics requiring A9 cut resistance with goatskin leather durability and TPR dorsal impact protection in a single premium mechanics glove, the \u003cstrong\u003eMCR Safety PD436122XL Predator A9 Goatskin Kevlar Gloves in XX-Large (\u003cstrong\u003eSKU: PD436122XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD43612's triple-protection architecture for 11–12-inch hand circumferences. The combination of A9 cut-rated Kevlar lining, goatskin leather palm, and Predator TPR impact guards addresses the most demanding hand hazard profiles in precision mechanics, sharp-material handling, and heavy industrial assembly where cut, abrasion, and impact risks are simultaneously present.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eGoatskin Leather with Kevlar Lining — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XX-Large — fits hand circumference approximately 11–12 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A9 Goatskin Kevlar (PD43612)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection, ANSI\/ISEA 105 A9 Cut Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD43612 series is designed for applications where the hand hazard profile includes high-grade cut risk from sharp metal edges, significant abrasion from rough surfaces, and impact risk from tool use and structural contact — environments where single-hazard PPE requires workers to change gloves for different phases of work, or compromise protection by choosing a glove that partially addresses the hazard set. The PD43612's integrated A9 cut, goatskin leather, and TPR architecture eliminates this compromise for the most demanding industrial mechanics applications.\u003c\/p\u003e\n\n\u003cp\u003eGoatskin leather is the premium natural leather choice for precision mechanics applications because of its combination of durability, oil resistance, and tactile sensitivity. Goatskin is thinner and more supple than cowhide or pigskin leather while maintaining superior abrasion resistance, allowing the wearer to feel tool handles and components through the palm material. For precision mechanical work — thread engagement, fastener torque sensing, valve actuation — this tactile feedback is operationally important. The PD436122XL goatskin palm provides this sensitivity while meeting the heavy abrasion demands of construction and industrial mechanics.\u003c\/p\u003e\n\n\u003cp\u003eThe A9 Kevlar lining of the PD436122XL provides the highest cut resistance classification under ANSI\/ISEA 105 — the specification appropriate for metal stamping work, glass handling, laser-cut metal edge handling, and any application where sustained contact with sharp edges creates significant laceration risk. The Kevlar lining is integrated into the glove construction beneath the goatskin palm and around the finger surfaces, providing complete cut coverage without reducing the goatskin's dexterity contribution.\u003c\/p\u003e\n\n\u003cp\u003eFor XX-Large-handed workers, the PD436122XL provides properly scaled multi-hazard protection for the 11–12-inch hand circumference. The goatskin palm panels are cut to XX-Large-specific dimensions, the Kevlar lining covers the complete finger and palm surface, and the TPR guards are positioned at the correct anatomical knuckle locations for XX-Large hands. This multi-layer, size-calibrated construction is what enables the PD43612 to deliver its full protection specification in real-world use.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal fabrication — laser-cut and stamped edge handling requiring A9 cut protection\u003c\/li\u003e\n  \u003cli\u003ePrecision automotive mechanics — engine work with sharp component edges\u003c\/li\u003e\n  \u003cli\u003eIndustrial assembly — high-cut-hazard component handling with impact risk\u003c\/li\u003e\n  \u003cli\u003eGlass installation and handling — cut and impact dual protection\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction — sharp material handling with impact exposure\u003c\/li\u003e\n  \u003cli\u003eHeavy construction — sharp structural material with combined hazard profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD436122XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747226333272\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXX-Large (hand circumference 11–12 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eGoatskin Leather with Kevlar Lining\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A9 Goatskin Kevlar (PD43612)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection, ANSI\/ISEA 105 A9 Cut Resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cut-resistant-gloves\"\u003eCut-Resistant Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD436122XL fits XX-Large hands with a circumference of approximately 11–12 inches. The glove is patterned to XX-Large-specific dimensions for proper goatskin palm coverage, Kevlar lining protection, and TPR guard alignment.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat is A9 cut resistance?\u003c\/dt\u003e\n  \u003cdd\u003eA9 is the highest cut resistance level under ANSI\/ISEA 105, requiring the glove material to withstand a blade force exceeding 6,000 grams before cutting through. A9 is appropriate for applications with sharp metal edges, glass, and other cutting surfaces where lower cut resistance levels would be exceeded by the hazard exposure.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy is goatskin leather preferred for precision mechanics over synthetic alternatives?\u003c\/dt\u003e\n  \u003cdd\u003eGoatskin leather is thinner and more supple than cowhide or synthetic alternatives while maintaining superior abrasion resistance. This combination provides tactile sensitivity for tool feel and component feedback that is operationally important in precision mechanics work, while durability for the abrasion exposure of construction and industrial maintenance.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD43612 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD43612 series is available from Medium through XX-Large in this listing, providing coverage for the primary hand size range. Contact wcsafety.com for complete size availability.\u003c\/dd\u003e\n\n  \u003cdt\u003eCan the PD43612 be used for glass handling operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD436122XL's A9 Kevlar lining provides the cut resistance appropriate for glass handling where edge laceration is the primary hazard, and the TPR guards protect against the impact events that occur during glass panel handling and installation.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024397922392,"sku":"'PD436122XL","price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/PD43612-360-C01__15000.1761228033_5cb578a7-2007-4d44-adf1-24c4948a0f68.jpg?v=1777008850"},{"product_id":"mcr-safety-pd4906m-predator-impact-gloves-medium","title":"MCR Safety PD4906M Predator Impact Gloves — Medium","description":"\u003c!-- Title: MCR Safety PD4906M Predator Impact Gloves — Medium | SKU: PD4906M | ID: 8747227021400 --\u003e\n\n\u003cp\u003eFor Medium-handed workers in construction, traffic control, and industrial operations where hand visibility is critical alongside impact protection, the \u003cstrong\u003eMCR Safety PD4906M Predator A2 Hi-Vis Impact Gloves in Medium (\u003cstrong\u003eSKU: PD4906M\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4906's high-visibility construction with TPR knuckle and dorsal guards for 8–9-inch hand circumferences. The high-visibility coloring of the PD4906 series addresses the sight-line safety requirements of work environments where hand position visibility reduces accident risk.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Medium — fits hand circumference approximately 8–9 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A2 Hi-Vis (PD4906)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4906 series integrates high-visibility coloring into the Predator impact protection platform, addressing construction and industrial environments where hand visibility is a safety-critical requirement alongside dorsal impact protection. Traffic control operations, road construction, crane signaling, and above-ground construction trades all involve work where hand position must be clearly visible to equipment operators and co-workers. The high-visibility construction of the PD4906M maintains signal clarity for these visual communication requirements.\u003c\/p\u003e\n\n\u003cp\u003eFor Medium-handed workers, the PD4906M provides high-visibility Predator protection scaled for the 8–9-inch hand circumference. The TPR guard positions are calibrated for Medium hand anatomy, and the synthetic leather palm coverage provides complete grip surface protection for Medium-specific hand geometry. High-visibility gloves only provide their safety benefit when they fit properly — improperly sized Hi-Vis gloves that are frequently removed due to discomfort eliminate the visibility benefit entirely.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and traffic control environments, the PD4906M addresses both the hand impact hazards of construction work and the visibility requirements for flagging and directing traffic. Flaggers and traffic control workers who need to make hand signals to drivers and equipment operators benefit from high-visibility gloves that make those signals unmistakably clear even in bright sunlight or inclement weather conditions.\u003c\/p\u003e\n\n\u003cp\u003eFor crane and rigging operations, the PD4906M provides the hand signal visibility required for crane operators to correctly read lift signals at distance, combined with the impact protection needed for rigging preparation work — connecting hooks, manipulating shackles, and guiding loads. The synthetic leather palm provides grip for rigging hardware while the TPR guards protect the dorsal surface during the hardware manipulation phases of lift preparation.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eCrane and rigging — signal work and rigging preparation\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork with visibility requirements\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction — scaffold, steel, and elevated work\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with machine guarding sight-line requirements\u003c\/li\u003e\n  \u003cli\u003eUtility construction — pole line, electrical, and pipeline work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4906M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747227021400\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eMedium (hand circumference 8–9 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A2 Hi-Vis (PD4906)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4906M fits Medium hands with a circumference of approximately 8–9 inches. The glove is patterned to Medium-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy is high visibility important in mechanics gloves for construction?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand position visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers' hands may be in equipment operating zones. For flagging, crane signaling, and elevated construction trades, visible hand positions reduce accident risk from misread signals or undetected hand placement near moving equipment.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4906 appropriate for crane signaling work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4906M's high-visibility construction makes hand signals clearly visible to crane operators reading lift signals at distance, while the TPR guards protect the hands during rigging preparation work. The synthetic leather palm provides grip for rigging hardware manipulation.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4906 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4906 series is available from Medium through XXX-Large, covering the primary hand size range in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes high-visibility color fade during use?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility synthetic materials maintain their color through normal use conditions. Prolonged UV exposure and heavy soiling can reduce visibility over time. Inspect periodically to confirm the high-visibility properties remain effective, and replace when visibility is compromised.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024401330264,"sku":"'PD4906M","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/40714__08949.1738178207.jpg?v=1777008868"},{"product_id":"mcr-safety-pd4906l-predator-impact-gloves-large","title":"MCR Safety PD4906L Predator Impact Gloves — Large","description":"\u003c!-- Title: MCR Safety PD4906L Predator Impact Gloves — Large | SKU: PD4906L | ID: 8747227643992 --\u003e\n\n\u003cp\u003eFor Large-handed workers in construction, traffic control, and industrial operations where hand visibility is critical alongside impact protection, the \u003cstrong\u003eMCR Safety PD4906L Predator A2 Hi-Vis Impact Gloves in Large (\u003cstrong\u003eSKU: PD4906L\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4906's high-visibility construction with TPR knuckle and dorsal guards for 9–10-inch hand circumferences. The high-visibility coloring of the PD4906 series addresses the sight-line safety requirements of work environments where hand position visibility reduces accident risk.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Large — fits hand circumference approximately 9–10 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A2 Hi-Vis (PD4906)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4906 series integrates high-visibility coloring into the Predator impact protection platform, addressing construction and industrial environments where hand visibility is a safety-critical requirement alongside dorsal impact protection. Traffic control operations, road construction, crane signaling, and above-ground construction trades all involve work where hand position must be clearly visible to equipment operators and co-workers. The high-visibility construction of the PD4906L maintains signal clarity for these visual communication requirements.\u003c\/p\u003e\n\n\u003cp\u003eFor Large-handed workers, the PD4906L provides high-visibility Predator protection scaled for the 9–10-inch hand circumference. The TPR guard positions are calibrated for Large hand anatomy, and the synthetic leather palm coverage provides complete grip surface protection for Large-specific hand geometry. High-visibility gloves only provide their safety benefit when they fit properly — improperly sized Hi-Vis gloves that are frequently removed due to discomfort eliminate the visibility benefit entirely.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and traffic control environments, the PD4906L addresses both the hand impact hazards of construction work and the visibility requirements for flagging and directing traffic. Flaggers and traffic control workers who need to make hand signals to drivers and equipment operators benefit from high-visibility gloves that make those signals unmistakably clear even in bright sunlight or inclement weather conditions.\u003c\/p\u003e\n\n\u003cp\u003eFor crane and rigging operations, the PD4906L provides the hand signal visibility required for crane operators to correctly read lift signals at distance, combined with the impact protection needed for rigging preparation work — connecting hooks, manipulating shackles, and guiding loads. The synthetic leather palm provides grip for rigging hardware while the TPR guards protect the dorsal surface during the hardware manipulation phases of lift preparation.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eCrane and rigging — signal work and rigging preparation\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork with visibility requirements\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction — scaffold, steel, and elevated work\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with machine guarding sight-line requirements\u003c\/li\u003e\n  \u003cli\u003eUtility construction — pole line, electrical, and pipeline work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4906L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747227643992\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eLarge (hand circumference 9–10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A2 Hi-Vis (PD4906)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4906L fits Large hands with a circumference of approximately 9–10 inches. The glove is patterned to Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy is high visibility important in mechanics gloves for construction?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand position visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers' hands may be in equipment operating zones. For flagging, crane signaling, and elevated construction trades, visible hand positions reduce accident risk from misread signals or undetected hand placement near moving equipment.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4906 appropriate for crane signaling work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4906L's high-visibility construction makes hand signals clearly visible to crane operators reading lift signals at distance, while the TPR guards protect the hands during rigging preparation work. The synthetic leather palm provides grip for rigging hardware manipulation.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4906 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4906 series is available from Medium through XXX-Large, covering the primary hand size range in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes high-visibility color fade during use?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility synthetic materials maintain their color through normal use conditions. Prolonged UV exposure and heavy soiling can reduce visibility over time. Inspect periodically to confirm the high-visibility properties remain effective, and replace when visibility is compromised.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024404213848,"sku":"'PD4906L","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/40714__08949.1738178207_180d6d39-977e-4f31-81dd-b0a7914217f4.jpg?v=1777008884"},{"product_id":"mcr-safety-pd4906xl-predator-impact-gloves-x-large","title":"MCR Safety PD4906XL Predator Impact Gloves — X-Large","description":"\u003c!-- Title: MCR Safety PD4906XL Predator Impact Gloves — X-Large | SKU: PD4906XL | ID: 8747228659800 --\u003e\n\n\u003cp\u003eFor X-Large-handed workers in construction, traffic control, and industrial operations where hand visibility is critical alongside impact protection, the \u003cstrong\u003eMCR Safety PD4906XL Predator A2 Hi-Vis Impact Gloves in X-Large (\u003cstrong\u003eSKU: PD4906XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4906's high-visibility construction with TPR knuckle and dorsal guards for 10–11-inch hand circumferences. The high-visibility coloring of the PD4906 series addresses the sight-line safety requirements of work environments where hand position visibility reduces accident risk.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: X-Large — fits hand circumference approximately 10–11 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A2 Hi-Vis (PD4906)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4906 series integrates high-visibility coloring into the Predator impact protection platform, addressing construction and industrial environments where hand visibility is a safety-critical requirement alongside dorsal impact protection. Traffic control operations, road construction, crane signaling, and above-ground construction trades all involve work where hand position must be clearly visible to equipment operators and co-workers. The high-visibility construction of the PD4906XL maintains signal clarity for these visual communication requirements.\u003c\/p\u003e\n\n\u003cp\u003eFor X-Large-handed workers, the PD4906XL provides high-visibility Predator protection scaled for the 10–11-inch hand circumference. The TPR guard positions are calibrated for X-Large hand anatomy, and the synthetic leather palm coverage provides complete grip surface protection for X-Large-specific hand geometry. High-visibility gloves only provide their safety benefit when they fit properly — improperly sized Hi-Vis gloves that are frequently removed due to discomfort eliminate the visibility benefit entirely.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and traffic control environments, the PD4906XL addresses both the hand impact hazards of construction work and the visibility requirements for flagging and directing traffic. Flaggers and traffic control workers who need to make hand signals to drivers and equipment operators benefit from high-visibility gloves that make those signals unmistakably clear even in bright sunlight or inclement weather conditions.\u003c\/p\u003e\n\n\u003cp\u003eFor crane and rigging operations, the PD4906XL provides the hand signal visibility required for crane operators to correctly read lift signals at distance, combined with the impact protection needed for rigging preparation work — connecting hooks, manipulating shackles, and guiding loads. The synthetic leather palm provides grip for rigging hardware while the TPR guards protect the dorsal surface during the hardware manipulation phases of lift preparation.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eCrane and rigging — signal work and rigging preparation\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork with visibility requirements\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction — scaffold, steel, and elevated work\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with machine guarding sight-line requirements\u003c\/li\u003e\n  \u003cli\u003eUtility construction — pole line, electrical, and pipeline work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4906XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747228659800\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eX-Large (hand circumference 10–11 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A2 Hi-Vis (PD4906)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4906XL fits X-Large hands with a circumference of approximately 10–11 inches. The glove is patterned to X-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy is high visibility important in mechanics gloves for construction?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand position visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers' hands may be in equipment operating zones. For flagging, crane signaling, and elevated construction trades, visible hand positions reduce accident risk from misread signals or undetected hand placement near moving equipment.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4906 appropriate for crane signaling work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4906XL's high-visibility construction makes hand signals clearly visible to crane operators reading lift signals at distance, while the TPR guards protect the hands during rigging preparation work. The synthetic leather palm provides grip for rigging hardware manipulation.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4906 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4906 series is available from Medium through XXX-Large, covering the primary hand size range in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes high-visibility color fade during use?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility synthetic materials maintain their color through normal use conditions. Prolonged UV exposure and heavy soiling can reduce visibility over time. Inspect periodically to confirm the high-visibility properties remain effective, and replace when visibility is compromised.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024406835288,"sku":"'PD4906XL","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/40714__08949.1738178207_291c0442-8a83-4846-b082-84e12c348949.jpg?v=1777008903"},{"product_id":"mcr-safety-pd49062xl-predator-impact-gloves-xx-large","title":"MCR Safety PD49062XL Predator Impact Gloves — XX-Large","description":"\u003c!-- Title: MCR Safety PD49062XL Predator Impact Gloves — XX-Large | SKU: PD49062XL | ID: 8747229511768 --\u003e\n\n\u003cp\u003eFor XX-Large-handed workers in construction, traffic control, and industrial operations where hand visibility is critical alongside impact protection, the \u003cstrong\u003eMCR Safety PD49062XL Predator A2 Hi-Vis Impact Gloves in XX-Large (\u003cstrong\u003eSKU: PD49062XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4906's high-visibility construction with TPR knuckle and dorsal guards for 11–12-inch hand circumferences. The high-visibility coloring of the PD4906 series addresses the sight-line safety requirements of work environments where hand position visibility reduces accident risk.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XX-Large — fits hand circumference approximately 11–12 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A2 Hi-Vis (PD4906)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4906 series integrates high-visibility coloring into the Predator impact protection platform, addressing construction and industrial environments where hand visibility is a safety-critical requirement alongside dorsal impact protection. Traffic control operations, road construction, crane signaling, and above-ground construction trades all involve work where hand position must be clearly visible to equipment operators and co-workers. The high-visibility construction of the PD49062XL maintains signal clarity for these visual communication requirements.\u003c\/p\u003e\n\n\u003cp\u003eFor XX-Large-handed workers, the PD49062XL provides high-visibility Predator protection scaled for the 11–12-inch hand circumference. The TPR guard positions are calibrated for XX-Large hand anatomy, and the synthetic leather palm coverage provides complete grip surface protection for XX-Large-specific hand geometry. High-visibility gloves only provide their safety benefit when they fit properly — improperly sized Hi-Vis gloves that are frequently removed due to discomfort eliminate the visibility benefit entirely.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and traffic control environments, the PD49062XL addresses both the hand impact hazards of construction work and the visibility requirements for flagging and directing traffic. Flaggers and traffic control workers who need to make hand signals to drivers and equipment operators benefit from high-visibility gloves that make those signals unmistakably clear even in bright sunlight or inclement weather conditions.\u003c\/p\u003e\n\n\u003cp\u003eFor crane and rigging operations, the PD49062XL provides the hand signal visibility required for crane operators to correctly read lift signals at distance, combined with the impact protection needed for rigging preparation work — connecting hooks, manipulating shackles, and guiding loads. The synthetic leather palm provides grip for rigging hardware while the TPR guards protect the dorsal surface during the hardware manipulation phases of lift preparation.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eCrane and rigging — signal work and rigging preparation\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork with visibility requirements\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction — scaffold, steel, and elevated work\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with machine guarding sight-line requirements\u003c\/li\u003e\n  \u003cli\u003eUtility construction — pole line, electrical, and pipeline work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD49062XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747229511768\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXX-Large (hand circumference 11–12 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A2 Hi-Vis (PD4906)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49062XL fits XX-Large hands with a circumference of approximately 11–12 inches. The glove is patterned to XX-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy is high visibility important in mechanics gloves for construction?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand position visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers' hands may be in equipment operating zones. For flagging, crane signaling, and elevated construction trades, visible hand positions reduce accident risk from misread signals or undetected hand placement near moving equipment.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4906 appropriate for crane signaling work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD49062XL's high-visibility construction makes hand signals clearly visible to crane operators reading lift signals at distance, while the TPR guards protect the hands during rigging preparation work. The synthetic leather palm provides grip for rigging hardware manipulation.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4906 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4906 series is available from Medium through XXX-Large, covering the primary hand size range in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes high-visibility color fade during use?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility synthetic materials maintain their color through normal use conditions. Prolonged UV exposure and heavy soiling can reduce visibility over time. Inspect periodically to confirm the high-visibility properties remain effective, and replace when visibility is compromised.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024409948248,"sku":"'PD49062XL","price":26.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/40714__08949.1738178207_8b63cac6-2524-460c-bc52-93e1a311427e.jpg?v=1777008922"},{"product_id":"mcr-safety-pd49063xl-predator-impact-gloves-xxx-large","title":"MCR Safety PD49063XL Predator Impact Gloves — XXX-Large","description":"\u003c!-- Title: MCR Safety PD49063XL Predator Impact Gloves — XXX-Large | SKU: PD49063XL | ID: 8747230298200 --\u003e\n\n\u003cp\u003eFor XXX-Large-handed workers in construction, traffic control, and industrial operations where hand visibility is critical alongside impact protection, the \u003cstrong\u003eMCR Safety PD49063XL Predator A2 Hi-Vis Impact Gloves in XXX-Large (\u003cstrong\u003eSKU: PD49063XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4906's high-visibility construction with TPR knuckle and dorsal guards for 12–13-inch hand circumferences. The high-visibility coloring of the PD4906 series addresses the sight-line safety requirements of work environments where hand position visibility reduces accident risk.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XXX-Large — fits hand circumference approximately 12–13 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator A2 Hi-Vis (PD4906)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4906 series integrates high-visibility coloring into the Predator impact protection platform, addressing construction and industrial environments where hand visibility is a safety-critical requirement alongside dorsal impact protection. Traffic control operations, road construction, crane signaling, and above-ground construction trades all involve work where hand position must be clearly visible to equipment operators and co-workers. The high-visibility construction of the PD49063XL maintains signal clarity for these visual communication requirements.\u003c\/p\u003e\n\n\u003cp\u003eFor XXX-Large-handed workers, the PD49063XL provides high-visibility Predator protection scaled for the 12–13-inch hand circumference. The TPR guard positions are calibrated for XXX-Large hand anatomy, and the synthetic leather palm coverage provides complete grip surface protection for XXX-Large-specific hand geometry. High-visibility gloves only provide their safety benefit when they fit properly — improperly sized Hi-Vis gloves that are frequently removed due to discomfort eliminate the visibility benefit entirely.\u003c\/p\u003e\n\n\u003cp\u003eIn road construction and traffic control environments, the PD49063XL addresses both the hand impact hazards of construction work and the visibility requirements for flagging and directing traffic. Flaggers and traffic control workers who need to make hand signals to drivers and equipment operators benefit from high-visibility gloves that make those signals unmistakably clear even in bright sunlight or inclement weather conditions.\u003c\/p\u003e\n\n\u003cp\u003eFor crane and rigging operations, the PD49063XL provides the hand signal visibility required for crane operators to correctly read lift signals at distance, combined with the impact protection needed for rigging preparation work — connecting hooks, manipulating shackles, and guiding loads. The synthetic leather palm provides grip for rigging hardware while the TPR guards protect the dorsal surface during the hardware manipulation phases of lift preparation.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoad construction and traffic control — flagging and hand signal operations\u003c\/li\u003e\n  \u003cli\u003eCrane and rigging — signal work and rigging preparation\u003c\/li\u003e\n  \u003cli\u003eConstruction ironwork with visibility requirements\u003c\/li\u003e\n  \u003cli\u003eAbove-ground construction — scaffold, steel, and elevated work\u003c\/li\u003e\n  \u003cli\u003eIndustrial operations with machine guarding sight-line requirements\u003c\/li\u003e\n  \u003cli\u003eUtility construction — pole line, electrical, and pipeline work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD49063XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747230298200\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXXX-Large (hand circumference 12–13 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator A2 Hi-Vis (PD4906)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/high-visibility\"\u003eHi-Vis Safety — High-Visibility PPE\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49063XL fits XXX-Large hands with a circumference of approximately 12–13 inches. The glove is patterned to XXX-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhy is high visibility important in mechanics gloves for construction?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility gloves make hand position visible to equipment operators and co-workers in environments where hand signals direct machine movements or where workers' hands may be in equipment operating zones. For flagging, crane signaling, and elevated construction trades, visible hand positions reduce accident risk from misread signals or undetected hand placement near moving equipment.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4906 appropriate for crane signaling work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD49063XL's high-visibility construction makes hand signals clearly visible to crane operators reading lift signals at distance, while the TPR guards protect the hands during rigging preparation work. The synthetic leather palm provides grip for rigging hardware manipulation.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4906 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4906 series is available from Medium through XXX-Large, covering the primary hand size range in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eDoes high-visibility color fade during use?\u003c\/dt\u003e\n  \u003cdd\u003eHigh-visibility synthetic materials maintain their color through normal use conditions. Prolonged UV exposure and heavy soiling can reduce visibility over time. Inspect periodically to confirm the high-visibility properties remain effective, and replace when visibility is compromised.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024412012632,"sku":"'PD49063XL","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/40714__08949.1738178207_fb098ee4-47a7-478b-9bcf-c0a738a9b475.jpg?v=1777008939"},{"product_id":"mcr-safety-pd3430s-predator-impact-gloves-small","title":"MCR Safety PD3430S Predator Impact Gloves — Small","description":"\u003c!-- Title: MCR Safety PD3430S Predator Impact Gloves — Small | SKU: PD3430S | ID: 8747231215704 --\u003e\n\n\u003cp\u003eFor Small-handed workers in industrial mechanics, equipment maintenance, and construction requiring comprehensive knuckle and dorsal impact protection with a synthetic leather palm in a Small mechanics glove, the \u003cstrong\u003eMCR Safety PD3430S Predator Impact Gloves in Small (\u003cstrong\u003eSKU: PD3430S\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD3430's reinforced TPR protection architecture for 7–8-inch hand circumferences. The PD3430 series provides the Predator line's core dorsal protection platform in a construction appropriate for demanding mechanical and construction trades across the full range of hand sizes.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Small — fits hand circumference approximately 7–8 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD3430)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD3430 series is engineered for the mechanical and construction environments where dorsal hand impact is a continuous daily hazard — not a rare event but a characteristic of the work itself. Confined-space maintenance, overhead component work, structural steel handling, and heavy tool use all create the dorsal hand contact patterns that cumulate into chronic hand injuries without TPR guard protection. The PD3430's guard architecture intercepts these impact events across the knuckle and extended dorsal surface.\u003c\/p\u003e\n\n\u003cp\u003eFor Small hands, the PD3430S provides properly scaled protection for the 7–8-inch hand circumference. In the Predator line, size-specific engineering ensures that the TPR guard positions correspond to the anatomical knuckle landmarks of each hand size — the critical factor that determines whether dorsal impact protection actually protects or merely covers the hand. The Small-specific pattern also provides synthetic leather palm coverage appropriate for the Small hand geometry.\u003c\/p\u003e\n\n\u003cp\u003eIn construction applications spanning structural framing, ironwork, and general labor, the PD3430S addresses the full hand hazard profile of the construction environment: rough material abrasion on the palm, impact from tool use and structural contact on the dorsal surface, and grip demands across a wide range of materials and tool types. The synthetic leather handles abrasion and provides grip; the TPR guards absorb impact. Together they cover the primary hand hazard spectrum in construction.\u003c\/p\u003e\n\n\u003cp\u003eFor industrial maintenance operations, the PD3430S provides the protection and dexterity combination needed for the varied tasks of plant maintenance mechanics — from precision component removal requiring fine motor control to heavy torque application requiring full grip strength. The flexible spandex back panel accommodates both task types, and the hook-and-loop wrist closure maintains glove position during high-torque work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction trades — framing, ironwork, concrete, and general labor\u003c\/li\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and structural systems\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction operations\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD3430S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747231215704\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eSmall (hand circumference 7–8 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD3430)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD3430S fits Small hands with a circumference of approximately 7–8 inches. The glove is patterned to Small-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD3430 appropriate for construction ironwork?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD3430S is appropriate for construction ironwork where structural steel and rebar handling creates both palm abrasion and dorsal impact hazards. The synthetic leather palm handles rough steel contact and provides grip, while the TPR dorsal coverage absorbs the impact events from material handling and structural assembly.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD3430 compare to the Mustang Utility series?\u003c\/dt\u003e\n  \u003cdd\u003eThe Predator PD3430 provides the impact protection level of the Predator series for demanding mechanical and construction applications. The Mustang Utility series is designed for the moderate hazard profile of general industrial and warehouse operations. For heavy construction and mechanics work with higher impact exposure, the PD3430 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD3430 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD3430 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, seams begin separating, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024414404696,"sku":"'PD3430S","price":17.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/35600__14697.1738178215.jpg?v=1777008955"},{"product_id":"mcr-safety-pd3430m-predator-impact-gloves-medium","title":"MCR Safety PD3430M Predator Impact Gloves — Medium","description":"\u003c!-- Title: MCR Safety PD3430M Predator Impact Gloves — Medium | SKU: PD3430M | ID: 8747232067672 --\u003e\n\n\u003cp\u003eFor Medium-handed workers in industrial mechanics, equipment maintenance, and construction requiring comprehensive knuckle and dorsal impact protection with a synthetic leather palm in a Medium mechanics glove, the \u003cstrong\u003eMCR Safety PD3430M Predator Impact Gloves in Medium (\u003cstrong\u003eSKU: PD3430M\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD3430's reinforced TPR protection architecture for 8–9-inch hand circumferences. The PD3430 series provides the Predator line's core dorsal protection platform in a construction appropriate for demanding mechanical and construction trades across the full range of hand sizes.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Medium — fits hand circumference approximately 8–9 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD3430)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD3430 series is engineered for the mechanical and construction environments where dorsal hand impact is a continuous daily hazard — not a rare event but a characteristic of the work itself. Confined-space maintenance, overhead component work, structural steel handling, and heavy tool use all create the dorsal hand contact patterns that cumulate into chronic hand injuries without TPR guard protection. The PD3430's guard architecture intercepts these impact events across the knuckle and extended dorsal surface.\u003c\/p\u003e\n\n\u003cp\u003eFor Medium hands, the PD3430M provides properly scaled protection for the 8–9-inch hand circumference. In the Predator line, size-specific engineering ensures that the TPR guard positions correspond to the anatomical knuckle landmarks of each hand size — the critical factor that determines whether dorsal impact protection actually protects or merely covers the hand. The Medium-specific pattern also provides synthetic leather palm coverage appropriate for the Medium hand geometry.\u003c\/p\u003e\n\n\u003cp\u003eIn construction applications spanning structural framing, ironwork, and general labor, the PD3430M addresses the full hand hazard profile of the construction environment: rough material abrasion on the palm, impact from tool use and structural contact on the dorsal surface, and grip demands across a wide range of materials and tool types. The synthetic leather handles abrasion and provides grip; the TPR guards absorb impact. Together they cover the primary hand hazard spectrum in construction.\u003c\/p\u003e\n\n\u003cp\u003eFor industrial maintenance operations, the PD3430M provides the protection and dexterity combination needed for the varied tasks of plant maintenance mechanics — from precision component removal requiring fine motor control to heavy torque application requiring full grip strength. The flexible spandex back panel accommodates both task types, and the hook-and-loop wrist closure maintains glove position during high-torque work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction trades — framing, ironwork, concrete, and general labor\u003c\/li\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and structural systems\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction operations\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD3430M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747232067672\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eMedium (hand circumference 8–9 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD3430)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD3430M fits Medium hands with a circumference of approximately 8–9 inches. The glove is patterned to Medium-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD3430 appropriate for construction ironwork?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD3430M is appropriate for construction ironwork where structural steel and rebar handling creates both palm abrasion and dorsal impact hazards. The synthetic leather palm handles rough steel contact and provides grip, while the TPR dorsal coverage absorbs the impact events from material handling and structural assembly.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD3430 compare to the Mustang Utility series?\u003c\/dt\u003e\n  \u003cdd\u003eThe Predator PD3430 provides the impact protection level of the Predator series for demanding mechanical and construction applications. The Mustang Utility series is designed for the moderate hazard profile of general industrial and warehouse operations. For heavy construction and mechanics work with higher impact exposure, the PD3430 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD3430 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD3430 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, seams begin separating, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024417157208,"sku":"'PD3430M","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/35600__14697.1738178215_f9ffed35-ba59-4050-8508-6b3a783ab988.jpg?v=1777008972"},{"product_id":"mcr-safety-pd3430l-predator-impact-gloves-large","title":"MCR Safety PD3430L Predator Impact Gloves — Large","description":"\u003c!-- Title: MCR Safety PD3430L Predator Impact Gloves — Large | SKU: PD3430L | ID: 8747233149016 --\u003e\n\n\u003cp\u003eFor Large-handed workers in industrial mechanics, equipment maintenance, and construction requiring comprehensive knuckle and dorsal impact protection with a synthetic leather palm in a Large mechanics glove, the \u003cstrong\u003eMCR Safety PD3430L Predator Impact Gloves in Large (\u003cstrong\u003eSKU: PD3430L\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD3430's reinforced TPR protection architecture for 9–10-inch hand circumferences. The PD3430 series provides the Predator line's core dorsal protection platform in a construction appropriate for demanding mechanical and construction trades across the full range of hand sizes.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Large — fits hand circumference approximately 9–10 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD3430)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD3430 series is engineered for the mechanical and construction environments where dorsal hand impact is a continuous daily hazard — not a rare event but a characteristic of the work itself. Confined-space maintenance, overhead component work, structural steel handling, and heavy tool use all create the dorsal hand contact patterns that cumulate into chronic hand injuries without TPR guard protection. The PD3430's guard architecture intercepts these impact events across the knuckle and extended dorsal surface.\u003c\/p\u003e\n\n\u003cp\u003eFor Large hands, the PD3430L provides properly scaled protection for the 9–10-inch hand circumference. In the Predator line, size-specific engineering ensures that the TPR guard positions correspond to the anatomical knuckle landmarks of each hand size — the critical factor that determines whether dorsal impact protection actually protects or merely covers the hand. The Large-specific pattern also provides synthetic leather palm coverage appropriate for the Large hand geometry.\u003c\/p\u003e\n\n\u003cp\u003eIn construction applications spanning structural framing, ironwork, and general labor, the PD3430L addresses the full hand hazard profile of the construction environment: rough material abrasion on the palm, impact from tool use and structural contact on the dorsal surface, and grip demands across a wide range of materials and tool types. The synthetic leather handles abrasion and provides grip; the TPR guards absorb impact. Together they cover the primary hand hazard spectrum in construction.\u003c\/p\u003e\n\n\u003cp\u003eFor industrial maintenance operations, the PD3430L provides the protection and dexterity combination needed for the varied tasks of plant maintenance mechanics — from precision component removal requiring fine motor control to heavy torque application requiring full grip strength. The flexible spandex back panel accommodates both task types, and the hook-and-loop wrist closure maintains glove position during high-torque work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction trades — framing, ironwork, concrete, and general labor\u003c\/li\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and structural systems\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction operations\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD3430L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747233149016\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eLarge (hand circumference 9–10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD3430)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD3430L fits Large hands with a circumference of approximately 9–10 inches. The glove is patterned to Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD3430 appropriate for construction ironwork?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD3430L is appropriate for construction ironwork where structural steel and rebar handling creates both palm abrasion and dorsal impact hazards. The synthetic leather palm handles rough steel contact and provides grip, while the TPR dorsal coverage absorbs the impact events from material handling and structural assembly.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD3430 compare to the Mustang Utility series?\u003c\/dt\u003e\n  \u003cdd\u003eThe Predator PD3430 provides the impact protection level of the Predator series for demanding mechanical and construction applications. The Mustang Utility series is designed for the moderate hazard profile of general industrial and warehouse operations. For heavy construction and mechanics work with higher impact exposure, the PD3430 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD3430 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD3430 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, seams begin separating, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024420434008,"sku":"'PD3430L","price":26.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/35600__14697.1738178215_1bf16dfa-2844-4db3-a9d2-c1aebe00aa50.jpg?v=1777008990"},{"product_id":"mcr-safety-pd3430xl-predator-impact-gloves-x-large","title":"MCR Safety PD3430XL Predator Impact Gloves — X-Large","description":"\u003c!-- Title: MCR Safety PD3430XL Predator Impact Gloves — X-Large | SKU: PD3430XL | ID: 8747234197592 --\u003e\n\n\u003cp\u003eFor X-Large-handed workers in industrial mechanics, equipment maintenance, and construction requiring comprehensive knuckle and dorsal impact protection with a synthetic leather palm in a X-Large mechanics glove, the \u003cstrong\u003eMCR Safety PD3430XL Predator Impact Gloves in X-Large (\u003cstrong\u003eSKU: PD3430XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD3430's reinforced TPR protection architecture for 10–11-inch hand circumferences. The PD3430 series provides the Predator line's core dorsal protection platform in a construction appropriate for demanding mechanical and construction trades across the full range of hand sizes.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: X-Large — fits hand circumference approximately 10–11 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD3430)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD3430 series is engineered for the mechanical and construction environments where dorsal hand impact is a continuous daily hazard — not a rare event but a characteristic of the work itself. Confined-space maintenance, overhead component work, structural steel handling, and heavy tool use all create the dorsal hand contact patterns that cumulate into chronic hand injuries without TPR guard protection. The PD3430's guard architecture intercepts these impact events across the knuckle and extended dorsal surface.\u003c\/p\u003e\n\n\u003cp\u003eFor X-Large hands, the PD3430XL provides properly scaled protection for the 10–11-inch hand circumference. In the Predator line, size-specific engineering ensures that the TPR guard positions correspond to the anatomical knuckle landmarks of each hand size — the critical factor that determines whether dorsal impact protection actually protects or merely covers the hand. The X-Large-specific pattern also provides synthetic leather palm coverage appropriate for the X-Large hand geometry.\u003c\/p\u003e\n\n\u003cp\u003eIn construction applications spanning structural framing, ironwork, and general labor, the PD3430XL addresses the full hand hazard profile of the construction environment: rough material abrasion on the palm, impact from tool use and structural contact on the dorsal surface, and grip demands across a wide range of materials and tool types. The synthetic leather handles abrasion and provides grip; the TPR guards absorb impact. Together they cover the primary hand hazard spectrum in construction.\u003c\/p\u003e\n\n\u003cp\u003eFor industrial maintenance operations, the PD3430XL provides the protection and dexterity combination needed for the varied tasks of plant maintenance mechanics — from precision component removal requiring fine motor control to heavy torque application requiring full grip strength. The flexible spandex back panel accommodates both task types, and the hook-and-loop wrist closure maintains glove position during high-torque work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction trades — framing, ironwork, concrete, and general labor\u003c\/li\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and structural systems\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction operations\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD3430XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747234197592\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eX-Large (hand circumference 10–11 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD3430)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD3430XL fits X-Large hands with a circumference of approximately 10–11 inches. The glove is patterned to X-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD3430 appropriate for construction ironwork?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD3430XL is appropriate for construction ironwork where structural steel and rebar handling creates both palm abrasion and dorsal impact hazards. The synthetic leather palm handles rough steel contact and provides grip, while the TPR dorsal coverage absorbs the impact events from material handling and structural assembly.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD3430 compare to the Mustang Utility series?\u003c\/dt\u003e\n  \u003cdd\u003eThe Predator PD3430 provides the impact protection level of the Predator series for demanding mechanical and construction applications. The Mustang Utility series is designed for the moderate hazard profile of general industrial and warehouse operations. For heavy construction and mechanics work with higher impact exposure, the PD3430 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD3430 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD3430 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, seams begin separating, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024422891608,"sku":"'PD3430XL","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/35600__14697.1738178215_7f028586-fea1-4275-8f43-4b2dad246a83.jpg?v=1777009008"},{"product_id":"mcr-safety-pd34302xl-predator-impact-gloves-xx-large","title":"MCR Safety PD34302XL Predator Impact Gloves — XX-Large","description":"\u003c!-- Title: MCR Safety PD34302XL Predator Impact Gloves — XX-Large | SKU: PD34302XL | ID: 8747235311704 --\u003e\n\n\u003cp\u003eFor XX-Large-handed workers in industrial mechanics, equipment maintenance, and construction requiring comprehensive knuckle and dorsal impact protection with a synthetic leather palm in a XX-Large mechanics glove, the \u003cstrong\u003eMCR Safety PD34302XL Predator Impact Gloves in XX-Large (\u003cstrong\u003eSKU: PD34302XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD3430's reinforced TPR protection architecture for 11–12-inch hand circumferences. The PD3430 series provides the Predator line's core dorsal protection platform in a construction appropriate for demanding mechanical and construction trades across the full range of hand sizes.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XX-Large — fits hand circumference approximately 11–12 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD3430)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD3430 series is engineered for the mechanical and construction environments where dorsal hand impact is a continuous daily hazard — not a rare event but a characteristic of the work itself. Confined-space maintenance, overhead component work, structural steel handling, and heavy tool use all create the dorsal hand contact patterns that cumulate into chronic hand injuries without TPR guard protection. The PD3430's guard architecture intercepts these impact events across the knuckle and extended dorsal surface.\u003c\/p\u003e\n\n\u003cp\u003eFor XX-Large hands, the PD34302XL provides properly scaled protection for the 11–12-inch hand circumference. In the Predator line, size-specific engineering ensures that the TPR guard positions correspond to the anatomical knuckle landmarks of each hand size — the critical factor that determines whether dorsal impact protection actually protects or merely covers the hand. The XX-Large-specific pattern also provides synthetic leather palm coverage appropriate for the XX-Large hand geometry.\u003c\/p\u003e\n\n\u003cp\u003eIn construction applications spanning structural framing, ironwork, and general labor, the PD34302XL addresses the full hand hazard profile of the construction environment: rough material abrasion on the palm, impact from tool use and structural contact on the dorsal surface, and grip demands across a wide range of materials and tool types. The synthetic leather handles abrasion and provides grip; the TPR guards absorb impact. Together they cover the primary hand hazard spectrum in construction.\u003c\/p\u003e\n\n\u003cp\u003eFor industrial maintenance operations, the PD34302XL provides the protection and dexterity combination needed for the varied tasks of plant maintenance mechanics — from precision component removal requiring fine motor control to heavy torque application requiring full grip strength. The flexible spandex back panel accommodates both task types, and the hook-and-loop wrist closure maintains glove position during high-torque work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction trades — framing, ironwork, concrete, and general labor\u003c\/li\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and structural systems\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction operations\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD34302XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747235311704\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXX-Large (hand circumference 11–12 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD3430)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD34302XL fits XX-Large hands with a circumference of approximately 11–12 inches. The glove is patterned to XX-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD3430 appropriate for construction ironwork?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD34302XL is appropriate for construction ironwork where structural steel and rebar handling creates both palm abrasion and dorsal impact hazards. The synthetic leather palm handles rough steel contact and provides grip, while the TPR dorsal coverage absorbs the impact events from material handling and structural assembly.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD3430 compare to the Mustang Utility series?\u003c\/dt\u003e\n  \u003cdd\u003eThe Predator PD3430 provides the impact protection level of the Predator series for demanding mechanical and construction applications. The Mustang Utility series is designed for the moderate hazard profile of general industrial and warehouse operations. For heavy construction and mechanics work with higher impact exposure, the PD3430 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD3430 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD3430 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, seams begin separating, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024425840728,"sku":"'PD34302XL","price":17.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/35600__14697.1738178215_62a59f35-05e3-4d50-9d83-4ff2f46d72dc.jpg?v=1777009025"},{"product_id":"mcr-safety-pd34303xl-predator-impact-gloves-xxx-large","title":"MCR Safety PD34303XL Predator Impact Gloves — XXX-Large","description":"\u003c!-- Title: MCR Safety PD34303XL Predator Impact Gloves — XXX-Large | SKU: PD34303XL | ID: 8747236229208 --\u003e\n\n\u003cp\u003eFor XXX-Large-handed workers in industrial mechanics, equipment maintenance, and construction requiring comprehensive knuckle and dorsal impact protection with a synthetic leather palm in a XXX-Large mechanics glove, the \u003cstrong\u003eMCR Safety PD34303XL Predator Impact Gloves in XXX-Large (\u003cstrong\u003eSKU: PD34303XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD3430's reinforced TPR protection architecture for 12–13-inch hand circumferences. The PD3430 series provides the Predator line's core dorsal protection platform in a construction appropriate for demanding mechanical and construction trades across the full range of hand sizes.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XXX-Large — fits hand circumference approximately 12–13 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD3430)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD3430 series is engineered for the mechanical and construction environments where dorsal hand impact is a continuous daily hazard — not a rare event but a characteristic of the work itself. Confined-space maintenance, overhead component work, structural steel handling, and heavy tool use all create the dorsal hand contact patterns that cumulate into chronic hand injuries without TPR guard protection. The PD3430's guard architecture intercepts these impact events across the knuckle and extended dorsal surface.\u003c\/p\u003e\n\n\u003cp\u003eFor XXX-Large hands, the PD34303XL provides properly scaled protection for the 12–13-inch hand circumference. In the Predator line, size-specific engineering ensures that the TPR guard positions correspond to the anatomical knuckle landmarks of each hand size — the critical factor that determines whether dorsal impact protection actually protects or merely covers the hand. The XXX-Large-specific pattern also provides synthetic leather palm coverage appropriate for the XXX-Large hand geometry.\u003c\/p\u003e\n\n\u003cp\u003eIn construction applications spanning structural framing, ironwork, and general labor, the PD34303XL addresses the full hand hazard profile of the construction environment: rough material abrasion on the palm, impact from tool use and structural contact on the dorsal surface, and grip demands across a wide range of materials and tool types. The synthetic leather handles abrasion and provides grip; the TPR guards absorb impact. Together they cover the primary hand hazard spectrum in construction.\u003c\/p\u003e\n\n\u003cp\u003eFor industrial maintenance operations, the PD34303XL provides the protection and dexterity combination needed for the varied tasks of plant maintenance mechanics — from precision component removal requiring fine motor control to heavy torque application requiring full grip strength. The flexible spandex back panel accommodates both task types, and the hook-and-loop wrist closure maintains glove position during high-torque work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction trades — framing, ironwork, concrete, and general labor\u003c\/li\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and structural systems\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction operations\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD34303XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747236229208\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXXX-Large (hand circumference 12–13 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD3430)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD34303XL fits XXX-Large hands with a circumference of approximately 12–13 inches. The glove is patterned to XXX-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD3430 appropriate for construction ironwork?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD34303XL is appropriate for construction ironwork where structural steel and rebar handling creates both palm abrasion and dorsal impact hazards. The synthetic leather palm handles rough steel contact and provides grip, while the TPR dorsal coverage absorbs the impact events from material handling and structural assembly.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD3430 compare to the Mustang Utility series?\u003c\/dt\u003e\n  \u003cdd\u003eThe Predator PD3430 provides the impact protection level of the Predator series for demanding mechanical and construction applications. The Mustang Utility series is designed for the moderate hazard profile of general industrial and warehouse operations. For heavy construction and mechanics work with higher impact exposure, the PD3430 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD3430 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD3430 series is available from Small through XXX-Large, covering the full range of hand sizes in construction and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, seams begin separating, or after significant documented impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024427053144,"sku":"'PD34303XL","price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/35600__14697.1738178215_9d3b585b-0960-40f8-a1da-08d5cc2c34a7.jpg?v=1777009042"},{"product_id":"mcr-safety-ff2930s-forceflex-impact-gloves-small","title":"MCR Safety FF2930S ForceFlex Impact Gloves — Small","description":"\u003c!-- Title: MCR Safety FF2930S ForceFlex Impact Gloves — Small | SKU: FF2930S | ID: 8747237015640 --\u003e\n\n\u003cp\u003eFor Small-handed workers in industrial operations, warehouse environments, and general construction requiring a flexible mechanics glove with TPR dorsal impact protection and synthetic leather palm grip, the \u003cstrong\u003eMCR Safety FF2930S ForceFlex Impact Gloves in Small (\u003cstrong\u003eSKU: FF2930S\u003c\/strong\u003e)\u003c\/strong\u003e deliver the FF2930's ForceFlex platform flexibility and protection for 7–8-inch hand circumferences. The ForceFlex series name reflects the design priority of this line: maximum flexibility for varied task performance combined with the dorsal impact protection required for industrial and construction environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Small — fits hand circumference approximately 7–8 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: ForceFlex (FF2930)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe FF2930 series targets workers whose tasks require both flexibility and impact protection throughout the work shift — a combination that less-flexible heavy-duty impact gloves cannot provide without significant compromise in dexterity. The ForceFlex construction uses a spandex-dominant dorsal panel with TPR guards positioned to allow maximum knuckle flexion, while the synthetic leather palm provides the grip performance needed for tool handling and material manipulation.\u003c\/p\u003e\n\n\u003cp\u003eFor Small-handed workers, the FF2930S provides ForceFlex protection calibrated for the 7–8-inch hand circumference. The Small-specific pattern dimensions ensure the TPR guards are positioned correctly for Small hand anatomy, and the spandex panel tension is adjusted for the Small knuckle spacing to provide the intended stretch performance without the material bunching that can occur in improperly scaled spandex constructions.\u003c\/p\u003e\n\n\u003cp\u003eIn warehouse and distribution center operations, the FF2930S provides the combination of impact protection and flexibility that workers performing extended packing, sorting, and material handling tasks require. Heavy-duty impact gloves restrict the fine motor movements needed for parcel handling and label scanning; the ForceFlex construction allows these precise movements while protecting the knuckles from the impact events that occur during pallet and heavy carton handling.\u003c\/p\u003e\n\n\u003cp\u003eFor utility maintenance and light industrial operations, the FF2930S addresses the mixed task performance requirement of workers who alternate between precision tool use and heavy material handling throughout the day. The spandex back adapts to both grip postures without fatigue-inducing restriction, and the synthetic leather palm provides consistent grip on the full range of tools and materials used in these roles.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarehouse and distribution — material handling and equipment operation\u003c\/li\u003e\n  \u003cli\u003eUtility maintenance — infrastructure inspection and repair\u003c\/li\u003e\n  \u003cli\u003eLight industrial manufacturing — assembly and material handling\u003c\/li\u003e\n  \u003cli\u003eConstruction general labor — mixed task performance with impact risk\u003c\/li\u003e\n  \u003cli\u003eFacility maintenance — multi-trade general maintenance work\u003c\/li\u003e\n  \u003cli\u003eAgriculture and outdoor operations — equipment and material handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFF2930S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747237015640\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eSmall (hand circumference 7–8 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eForceFlex (FF2930)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2930S fits Small hands with a circumference of approximately 7–8 inches. The glove is patterned to Small-specific dimensions for proper TPR guard alignment and synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat makes the ForceFlex series more flexible than other impact gloves?\u003c\/dt\u003e\n  \u003cdd\u003eThe ForceFlex series prioritizes the spandex dorsal panel construction for maximum four-way stretch at the knuckles and back of hand, allowing full finger flexion for both precision and power grips. The TPR guards are positioned to flex with the hand rather than restricting movement, making the FF2930 series particularly suitable for tasks requiring frequent grip changes and precision manipulation.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the FF2930 appropriate for warehouse operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The FF2930S is well-suited for warehouse and distribution operations where workers need the flexibility for precision parcel and product handling combined with impact protection for pallet and heavy carton handling. The lightweight ForceFlex construction supports extended-shift comfort.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the FF2930 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2930 series is available from Small through XX-Large, covering the primary hand size range for industrial and warehouse workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the FF2930 differ from the FF2931 series?\u003c\/dt\u003e\n  \u003cdd\u003eBoth series are part of the ForceFlex platform. The FF2930 provides standard ForceFlex impact protection; the FF2931 may include additional features or specifications for higher-demand applications. For specific series comparisons, consult wcsafety.com or contact our team.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024429674584,"sku":"'FF2930S","price":5.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/42383__41535.1738178083.jpg?v=1777009060"},{"product_id":"mcr-safety-ff2930m-forceflex-impact-gloves-medium","title":"MCR Safety FF2930M ForceFlex Impact Gloves — Medium","description":"\u003c!-- Title: MCR Safety FF2930M ForceFlex Impact Gloves — Medium | SKU: FF2930M | ID: 8747237802072 --\u003e\n\n\u003cp\u003eFor Medium-handed workers in industrial operations, warehouse environments, and general construction requiring a flexible mechanics glove with TPR dorsal impact protection and synthetic leather palm grip, the \u003cstrong\u003eMCR Safety FF2930M ForceFlex Impact Gloves in Medium (\u003cstrong\u003eSKU: FF2930M\u003c\/strong\u003e)\u003c\/strong\u003e deliver the FF2930's ForceFlex platform flexibility and protection for 8–9-inch hand circumferences. The ForceFlex series name reflects the design priority of this line: maximum flexibility for varied task performance combined with the dorsal impact protection required for industrial and construction environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Medium — fits hand circumference approximately 8–9 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: ForceFlex (FF2930)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe FF2930 series targets workers whose tasks require both flexibility and impact protection throughout the work shift — a combination that less-flexible heavy-duty impact gloves cannot provide without significant compromise in dexterity. The ForceFlex construction uses a spandex-dominant dorsal panel with TPR guards positioned to allow maximum knuckle flexion, while the synthetic leather palm provides the grip performance needed for tool handling and material manipulation.\u003c\/p\u003e\n\n\u003cp\u003eFor Medium-handed workers, the FF2930M provides ForceFlex protection calibrated for the 8–9-inch hand circumference. The Medium-specific pattern dimensions ensure the TPR guards are positioned correctly for Medium hand anatomy, and the spandex panel tension is adjusted for the Medium knuckle spacing to provide the intended stretch performance without the material bunching that can occur in improperly scaled spandex constructions.\u003c\/p\u003e\n\n\u003cp\u003eIn warehouse and distribution center operations, the FF2930M provides the combination of impact protection and flexibility that workers performing extended packing, sorting, and material handling tasks require. Heavy-duty impact gloves restrict the fine motor movements needed for parcel handling and label scanning; the ForceFlex construction allows these precise movements while protecting the knuckles from the impact events that occur during pallet and heavy carton handling.\u003c\/p\u003e\n\n\u003cp\u003eFor utility maintenance and light industrial operations, the FF2930M addresses the mixed task performance requirement of workers who alternate between precision tool use and heavy material handling throughout the day. The spandex back adapts to both grip postures without fatigue-inducing restriction, and the synthetic leather palm provides consistent grip on the full range of tools and materials used in these roles.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarehouse and distribution — material handling and equipment operation\u003c\/li\u003e\n  \u003cli\u003eUtility maintenance — infrastructure inspection and repair\u003c\/li\u003e\n  \u003cli\u003eLight industrial manufacturing — assembly and material handling\u003c\/li\u003e\n  \u003cli\u003eConstruction general labor — mixed task performance with impact risk\u003c\/li\u003e\n  \u003cli\u003eFacility maintenance — multi-trade general maintenance work\u003c\/li\u003e\n  \u003cli\u003eAgriculture and outdoor operations — equipment and material handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFF2930M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747237802072\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eMedium (hand circumference 8–9 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eForceFlex (FF2930)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2930M fits Medium hands with a circumference of approximately 8–9 inches. The glove is patterned to Medium-specific dimensions for proper TPR guard alignment and synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat makes the ForceFlex series more flexible than other impact gloves?\u003c\/dt\u003e\n  \u003cdd\u003eThe ForceFlex series prioritizes the spandex dorsal panel construction for maximum four-way stretch at the knuckles and back of hand, allowing full finger flexion for both precision and power grips. The TPR guards are positioned to flex with the hand rather than restricting movement, making the FF2930 series particularly suitable for tasks requiring frequent grip changes and precision manipulation.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the FF2930 appropriate for warehouse operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The FF2930M is well-suited for warehouse and distribution operations where workers need the flexibility for precision parcel and product handling combined with impact protection for pallet and heavy carton handling. The lightweight ForceFlex construction supports extended-shift comfort.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the FF2930 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2930 series is available from Small through XX-Large, covering the primary hand size range for industrial and warehouse workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the FF2930 differ from the FF2931 series?\u003c\/dt\u003e\n  \u003cdd\u003eBoth series are part of the ForceFlex platform. The FF2930 provides standard ForceFlex impact protection; the FF2931 may include additional features or specifications for higher-demand applications. For specific series comparisons, consult wcsafety.com or contact our team.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024435867736,"sku":"'FF2930M","price":27.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/42383__41535.1738178083_4791b2af-7ae0-40b3-9e5e-145d7a7c1043.jpg?v=1777009076"},{"product_id":"mcr-safety-ff2930l-forceflex-impact-gloves-large","title":"MCR Safety FF2930L ForceFlex Impact Gloves — Large","description":"\u003c!-- Title: MCR Safety FF2930L ForceFlex Impact Gloves — Large | SKU: FF2930L | ID: 8747238785112 --\u003e\n\n\u003cp\u003eFor Large-handed workers in industrial operations, warehouse environments, and general construction requiring a flexible mechanics glove with TPR dorsal impact protection and synthetic leather palm grip, the \u003cstrong\u003eMCR Safety FF2930L ForceFlex Impact Gloves in Large (\u003cstrong\u003eSKU: FF2930L\u003c\/strong\u003e)\u003c\/strong\u003e deliver the FF2930's ForceFlex platform flexibility and protection for 9–10-inch hand circumferences. The ForceFlex series name reflects the design priority of this line: maximum flexibility for varied task performance combined with the dorsal impact protection required for industrial and construction environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Large — fits hand circumference approximately 9–10 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: ForceFlex (FF2930)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe FF2930 series targets workers whose tasks require both flexibility and impact protection throughout the work shift — a combination that less-flexible heavy-duty impact gloves cannot provide without significant compromise in dexterity. The ForceFlex construction uses a spandex-dominant dorsal panel with TPR guards positioned to allow maximum knuckle flexion, while the synthetic leather palm provides the grip performance needed for tool handling and material manipulation.\u003c\/p\u003e\n\n\u003cp\u003eFor Large-handed workers, the FF2930L provides ForceFlex protection calibrated for the 9–10-inch hand circumference. The Large-specific pattern dimensions ensure the TPR guards are positioned correctly for Large hand anatomy, and the spandex panel tension is adjusted for the Large knuckle spacing to provide the intended stretch performance without the material bunching that can occur in improperly scaled spandex constructions.\u003c\/p\u003e\n\n\u003cp\u003eIn warehouse and distribution center operations, the FF2930L provides the combination of impact protection and flexibility that workers performing extended packing, sorting, and material handling tasks require. Heavy-duty impact gloves restrict the fine motor movements needed for parcel handling and label scanning; the ForceFlex construction allows these precise movements while protecting the knuckles from the impact events that occur during pallet and heavy carton handling.\u003c\/p\u003e\n\n\u003cp\u003eFor utility maintenance and light industrial operations, the FF2930L addresses the mixed task performance requirement of workers who alternate between precision tool use and heavy material handling throughout the day. The spandex back adapts to both grip postures without fatigue-inducing restriction, and the synthetic leather palm provides consistent grip on the full range of tools and materials used in these roles.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarehouse and distribution — material handling and equipment operation\u003c\/li\u003e\n  \u003cli\u003eUtility maintenance — infrastructure inspection and repair\u003c\/li\u003e\n  \u003cli\u003eLight industrial manufacturing — assembly and material handling\u003c\/li\u003e\n  \u003cli\u003eConstruction general labor — mixed task performance with impact risk\u003c\/li\u003e\n  \u003cli\u003eFacility maintenance — multi-trade general maintenance work\u003c\/li\u003e\n  \u003cli\u003eAgriculture and outdoor operations — equipment and material handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFF2930L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747238785112\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eLarge (hand circumference 9–10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eForceFlex (FF2930)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2930L fits Large hands with a circumference of approximately 9–10 inches. The glove is patterned to Large-specific dimensions for proper TPR guard alignment and synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat makes the ForceFlex series more flexible than other impact gloves?\u003c\/dt\u003e\n  \u003cdd\u003eThe ForceFlex series prioritizes the spandex dorsal panel construction for maximum four-way stretch at the knuckles and back of hand, allowing full finger flexion for both precision and power grips. The TPR guards are positioned to flex with the hand rather than restricting movement, making the FF2930 series particularly suitable for tasks requiring frequent grip changes and precision manipulation.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the FF2930 appropriate for warehouse operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The FF2930L is well-suited for warehouse and distribution operations where workers need the flexibility for precision parcel and product handling combined with impact protection for pallet and heavy carton handling. The lightweight ForceFlex construction supports extended-shift comfort.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the FF2930 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2930 series is available from Small through XX-Large, covering the primary hand size range for industrial and warehouse workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the FF2930 differ from the FF2931 series?\u003c\/dt\u003e\n  \u003cdd\u003eBoth series are part of the ForceFlex platform. The FF2930 provides standard ForceFlex impact protection; the FF2931 may include additional features or specifications for higher-demand applications. For specific series comparisons, consult wcsafety.com or contact our team.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024437866584,"sku":"'FF2930L","price":28.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/42383__41535.1738178083_d69d24ef-11cd-44d9-a7b7-369390f4fbdd.jpg?v=1777009094"},{"product_id":"mcr-safety-ff2930xl-forceflex-impact-gloves-x-large","title":"MCR Safety FF2930XL ForceFlex Impact Gloves — X-Large","description":"\u003c!-- Title: MCR Safety FF2930XL ForceFlex Impact Gloves — X-Large | SKU: FF2930XL | ID: 8747239833688 --\u003e\n\n\u003cp\u003eFor X-Large-handed workers in industrial operations, warehouse environments, and general construction requiring a flexible mechanics glove with TPR dorsal impact protection and synthetic leather palm grip, the \u003cstrong\u003eMCR Safety FF2930XL ForceFlex Impact Gloves in X-Large (\u003cstrong\u003eSKU: FF2930XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the FF2930's ForceFlex platform flexibility and protection for 10–11-inch hand circumferences. The ForceFlex series name reflects the design priority of this line: maximum flexibility for varied task performance combined with the dorsal impact protection required for industrial and construction environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: X-Large — fits hand circumference approximately 10–11 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: ForceFlex (FF2930)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe FF2930 series targets workers whose tasks require both flexibility and impact protection throughout the work shift — a combination that less-flexible heavy-duty impact gloves cannot provide without significant compromise in dexterity. The ForceFlex construction uses a spandex-dominant dorsal panel with TPR guards positioned to allow maximum knuckle flexion, while the synthetic leather palm provides the grip performance needed for tool handling and material manipulation.\u003c\/p\u003e\n\n\u003cp\u003eFor X-Large-handed workers, the FF2930XL provides ForceFlex protection calibrated for the 10–11-inch hand circumference. The X-Large-specific pattern dimensions ensure the TPR guards are positioned correctly for X-Large hand anatomy, and the spandex panel tension is adjusted for the X-Large knuckle spacing to provide the intended stretch performance without the material bunching that can occur in improperly scaled spandex constructions.\u003c\/p\u003e\n\n\u003cp\u003eIn warehouse and distribution center operations, the FF2930XL provides the combination of impact protection and flexibility that workers performing extended packing, sorting, and material handling tasks require. Heavy-duty impact gloves restrict the fine motor movements needed for parcel handling and label scanning; the ForceFlex construction allows these precise movements while protecting the knuckles from the impact events that occur during pallet and heavy carton handling.\u003c\/p\u003e\n\n\u003cp\u003eFor utility maintenance and light industrial operations, the FF2930XL addresses the mixed task performance requirement of workers who alternate between precision tool use and heavy material handling throughout the day. The spandex back adapts to both grip postures without fatigue-inducing restriction, and the synthetic leather palm provides consistent grip on the full range of tools and materials used in these roles.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarehouse and distribution — material handling and equipment operation\u003c\/li\u003e\n  \u003cli\u003eUtility maintenance — infrastructure inspection and repair\u003c\/li\u003e\n  \u003cli\u003eLight industrial manufacturing — assembly and material handling\u003c\/li\u003e\n  \u003cli\u003eConstruction general labor — mixed task performance with impact risk\u003c\/li\u003e\n  \u003cli\u003eFacility maintenance — multi-trade general maintenance work\u003c\/li\u003e\n  \u003cli\u003eAgriculture and outdoor operations — equipment and material handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFF2930XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747239833688\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eX-Large (hand circumference 10–11 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eForceFlex (FF2930)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2930XL fits X-Large hands with a circumference of approximately 10–11 inches. The glove is patterned to X-Large-specific dimensions for proper TPR guard alignment and synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat makes the ForceFlex series more flexible than other impact gloves?\u003c\/dt\u003e\n  \u003cdd\u003eThe ForceFlex series prioritizes the spandex dorsal panel construction for maximum four-way stretch at the knuckles and back of hand, allowing full finger flexion for both precision and power grips. The TPR guards are positioned to flex with the hand rather than restricting movement, making the FF2930 series particularly suitable for tasks requiring frequent grip changes and precision manipulation.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the FF2930 appropriate for warehouse operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The FF2930XL is well-suited for warehouse and distribution operations where workers need the flexibility for precision parcel and product handling combined with impact protection for pallet and heavy carton handling. The lightweight ForceFlex construction supports extended-shift comfort.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the FF2930 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2930 series is available from Small through XX-Large, covering the primary hand size range for industrial and warehouse workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the FF2930 differ from the FF2931 series?\u003c\/dt\u003e\n  \u003cdd\u003eBoth series are part of the ForceFlex platform. The FF2930 provides standard ForceFlex impact protection; the FF2931 may include additional features or specifications for higher-demand applications. For specific series comparisons, consult wcsafety.com or contact our team.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024440160344,"sku":"'FF2930XL","price":34.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/42383__41535.1738178083_ce06a720-1475-4c6d-aae5-9d7d577fbae3.jpg?v=1777009112"},{"product_id":"mcr-safety-ff29302xl-forceflex-impact-gloves-xx-large","title":"MCR Safety FF29302XL ForceFlex Impact Gloves — XX-Large","description":"\u003c!-- Title: MCR Safety FF29302XL ForceFlex Impact Gloves — XX-Large | SKU: FF29302XL | ID: 8747240718424 --\u003e\n\n\u003cp\u003eFor XX-Large-handed workers in industrial operations, warehouse environments, and general construction requiring a flexible mechanics glove with TPR dorsal impact protection and synthetic leather palm grip, the \u003cstrong\u003eMCR Safety FF29302XL ForceFlex Impact Gloves in XX-Large (\u003cstrong\u003eSKU: FF29302XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the FF2930's ForceFlex platform flexibility and protection for 11–12-inch hand circumferences. The ForceFlex series name reflects the design priority of this line: maximum flexibility for varied task performance combined with the dorsal impact protection required for industrial and construction environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XX-Large — fits hand circumference approximately 11–12 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: ForceFlex (FF2930)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe FF2930 series targets workers whose tasks require both flexibility and impact protection throughout the work shift — a combination that less-flexible heavy-duty impact gloves cannot provide without significant compromise in dexterity. The ForceFlex construction uses a spandex-dominant dorsal panel with TPR guards positioned to allow maximum knuckle flexion, while the synthetic leather palm provides the grip performance needed for tool handling and material manipulation.\u003c\/p\u003e\n\n\u003cp\u003eFor XX-Large-handed workers, the FF29302XL provides ForceFlex protection calibrated for the 11–12-inch hand circumference. The XX-Large-specific pattern dimensions ensure the TPR guards are positioned correctly for XX-Large hand anatomy, and the spandex panel tension is adjusted for the XX-Large knuckle spacing to provide the intended stretch performance without the material bunching that can occur in improperly scaled spandex constructions.\u003c\/p\u003e\n\n\u003cp\u003eIn warehouse and distribution center operations, the FF29302XL provides the combination of impact protection and flexibility that workers performing extended packing, sorting, and material handling tasks require. Heavy-duty impact gloves restrict the fine motor movements needed for parcel handling and label scanning; the ForceFlex construction allows these precise movements while protecting the knuckles from the impact events that occur during pallet and heavy carton handling.\u003c\/p\u003e\n\n\u003cp\u003eFor utility maintenance and light industrial operations, the FF29302XL addresses the mixed task performance requirement of workers who alternate between precision tool use and heavy material handling throughout the day. The spandex back adapts to both grip postures without fatigue-inducing restriction, and the synthetic leather palm provides consistent grip on the full range of tools and materials used in these roles.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarehouse and distribution — material handling and equipment operation\u003c\/li\u003e\n  \u003cli\u003eUtility maintenance — infrastructure inspection and repair\u003c\/li\u003e\n  \u003cli\u003eLight industrial manufacturing — assembly and material handling\u003c\/li\u003e\n  \u003cli\u003eConstruction general labor — mixed task performance with impact risk\u003c\/li\u003e\n  \u003cli\u003eFacility maintenance — multi-trade general maintenance work\u003c\/li\u003e\n  \u003cli\u003eAgriculture and outdoor operations — equipment and material handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFF29302XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747240718424\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXX-Large (hand circumference 11–12 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eForceFlex (FF2930)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF29302XL fits XX-Large hands with a circumference of approximately 11–12 inches. The glove is patterned to XX-Large-specific dimensions for proper TPR guard alignment and synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat makes the ForceFlex series more flexible than other impact gloves?\u003c\/dt\u003e\n  \u003cdd\u003eThe ForceFlex series prioritizes the spandex dorsal panel construction for maximum four-way stretch at the knuckles and back of hand, allowing full finger flexion for both precision and power grips. The TPR guards are positioned to flex with the hand rather than restricting movement, making the FF2930 series particularly suitable for tasks requiring frequent grip changes and precision manipulation.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the FF2930 appropriate for warehouse operations?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The FF29302XL is well-suited for warehouse and distribution operations where workers need the flexibility for precision parcel and product handling combined with impact protection for pallet and heavy carton handling. The lightweight ForceFlex construction supports extended-shift comfort.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the FF2930 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe FF2930 series is available from Small through XX-Large, covering the primary hand size range for industrial and warehouse workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the FF2930 differ from the FF2931 series?\u003c\/dt\u003e\n  \u003cdd\u003eBoth series are part of the ForceFlex platform. The FF2930 provides standard ForceFlex impact protection; the FF2931 may include additional features or specifications for higher-demand applications. For specific series comparisons, consult wcsafety.com or contact our team.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024442486872,"sku":"'FF29302XL","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/42383__41535.1738178083_0c517bb3-2302-40ae-861b-9659c38a1e09.jpg?v=1777009128"},{"product_id":"mcr-safety-pd4971s-predator-impact-gloves-small","title":"MCR Safety PD4971S Predator Impact Gloves — Small","description":"\u003c!-- Title: MCR Safety PD4971S Predator Impact Gloves — Small | SKU: PD4971S | ID: 8747242029144 --\u003e\n\n\u003cp\u003eFor Small-handed industrial mechanics and construction professionals requiring TPR knuckle and dorsal impact protection combined with synthetic leather grip durability, the \u003cstrong\u003eMCR Safety PD4971S Predator Impact Gloves in Small (\u003cstrong\u003eSKU: PD4971S\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4971's Predator series protection for 7–8-inch hand circumferences. The PD4971 series provides the reinforced TPR architecture of the Predator platform in a synthetic leather and spandex mechanics glove optimized for the combined grip and protection demands of daily mechanical and construction work.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Small — fits hand circumference approximately 7–8 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4971)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4971 series is positioned within the Predator lineup for industrial mechanics and construction tradespeople whose work requires reliable dorsal hand protection across the full shift. The TPR guard system covers the knuckle and extended dorsal surface, providing energy absorption for both acute impact events and the cumulative low-energy contact impacts that are inherent to daily mechanical work in tight spaces and on construction sites.\u003c\/p\u003e\n\n\u003cp\u003eThe Small format of the PD4971S is engineered for workers with 7–8-inch hand circumferences. The pattern dimensions ensure TPR guards are positioned at the correct anatomical knuckle locations for Small hands, and the synthetic leather palm panels provide complete coverage from heel to finger bases. This size-specific engineering is the foundation of the Predator series' protection effectiveness — guards that are correctly positioned protect; guards that are shifted by incorrect sizing do not.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial plant maintenance applications, the PD4971S provides protection for the overhead, confined-space, and reach-in work patterns that place the dorsal hand surface at impact risk from equipment structures. Industrial maintenance mechanics routinely work in positions where visibility of the hand's position is limited, making passive dorsal protection from TPR guards essential for preventing the unwitnessed knuckle and dorsal contact events that accumulate into chronic hand injury.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD4971S provides the oil resistance and abrasion durability needed for industrial maintenance work involving lubricated components, hydraulic equipment, and rough structural materials. The consistent grip of synthetic leather on oil-contaminated tool handles and component surfaces reduces the hand force required for secure tool control, decreasing fatigue during extended-shift mechanical work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — structural framing and ironwork\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure maintenance\u003c\/li\u003e\n  \u003cli\u003eGeneral manufacturing with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4971S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747242029144\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eSmall (hand circumference 7–8 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4971)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4971S fits Small hands with a circumference of approximately 7–8 inches. The glove is patterned to Small-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4971 appropriate for industrial plant maintenance?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4971S is well-suited for plant maintenance mechanics whose work involves confined-space component access, overhead operations, and equipment structure contact that creates dorsal hand impact exposure. The TPR coverage and synthetic leather construction address the combined protection and grip requirements of this role.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4971 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4971 series is available from Small through XX-Large, covering the primary hand size range for industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD4971 compare to the Predator PD2901 for mechanical assembly?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD2901 adds individual finger TPR guards for environments with frequent finger-specific impact from precision assembly and fastener handling. The PD4971 provides knuckle and dorsal coverage for environments where dorsal hand protection is the primary requirement. For heavy mechanics with dorsal impact as the main hazard, the PD4971 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, when seams separate, or after significant impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024444747864,"sku":"'PD4971S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/123477__69948.1738178239.jpg?v=1777009144"},{"product_id":"mcr-safety-pd4971m-predator-impact-gloves-medium","title":"MCR Safety PD4971M Predator Impact Gloves — Medium","description":"\u003c!-- Title: MCR Safety PD4971M Predator Impact Gloves — Medium | SKU: PD4971M | ID: 8747243208792 --\u003e\n\n\u003cp\u003eFor Medium-handed industrial mechanics and construction professionals requiring TPR knuckle and dorsal impact protection combined with synthetic leather grip durability, the \u003cstrong\u003eMCR Safety PD4971M Predator Impact Gloves in Medium (\u003cstrong\u003eSKU: PD4971M\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4971's Predator series protection for 8–9-inch hand circumferences. The PD4971 series provides the reinforced TPR architecture of the Predator platform in a synthetic leather and spandex mechanics glove optimized for the combined grip and protection demands of daily mechanical and construction work.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Medium — fits hand circumference approximately 8–9 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4971)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4971 series is positioned within the Predator lineup for industrial mechanics and construction tradespeople whose work requires reliable dorsal hand protection across the full shift. The TPR guard system covers the knuckle and extended dorsal surface, providing energy absorption for both acute impact events and the cumulative low-energy contact impacts that are inherent to daily mechanical work in tight spaces and on construction sites.\u003c\/p\u003e\n\n\u003cp\u003eThe Medium format of the PD4971M is engineered for workers with 8–9-inch hand circumferences. The pattern dimensions ensure TPR guards are positioned at the correct anatomical knuckle locations for Medium hands, and the synthetic leather palm panels provide complete coverage from heel to finger bases. This size-specific engineering is the foundation of the Predator series' protection effectiveness — guards that are correctly positioned protect; guards that are shifted by incorrect sizing do not.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial plant maintenance applications, the PD4971M provides protection for the overhead, confined-space, and reach-in work patterns that place the dorsal hand surface at impact risk from equipment structures. Industrial maintenance mechanics routinely work in positions where visibility of the hand's position is limited, making passive dorsal protection from TPR guards essential for preventing the unwitnessed knuckle and dorsal contact events that accumulate into chronic hand injury.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD4971M provides the oil resistance and abrasion durability needed for industrial maintenance work involving lubricated components, hydraulic equipment, and rough structural materials. The consistent grip of synthetic leather on oil-contaminated tool handles and component surfaces reduces the hand force required for secure tool control, decreasing fatigue during extended-shift mechanical work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — structural framing and ironwork\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure maintenance\u003c\/li\u003e\n  \u003cli\u003eGeneral manufacturing with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4971M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747243208792\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eMedium (hand circumference 8–9 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4971)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4971M fits Medium hands with a circumference of approximately 8–9 inches. The glove is patterned to Medium-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4971 appropriate for industrial plant maintenance?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4971M is well-suited for plant maintenance mechanics whose work involves confined-space component access, overhead operations, and equipment structure contact that creates dorsal hand impact exposure. The TPR coverage and synthetic leather construction address the combined protection and grip requirements of this role.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4971 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4971 series is available from Small through XX-Large, covering the primary hand size range for industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD4971 compare to the Predator PD2901 for mechanical assembly?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD2901 adds individual finger TPR guards for environments with frequent finger-specific impact from precision assembly and fastener handling. The PD4971 provides knuckle and dorsal coverage for environments where dorsal hand protection is the primary requirement. For heavy mechanics with dorsal impact as the main hazard, the PD4971 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, when seams separate, or after significant impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024448122968,"sku":"'PD4971M","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/123477__69948.1738178239_fa4dedbc-862c-45c3-9194-104b0976a7eb.jpg?v=1777009160"},{"product_id":"mcr-safety-pd4971l-predator-impact-gloves-large","title":"MCR Safety PD4971L Predator Impact Gloves — Large","description":"\u003c!-- Title: MCR Safety PD4971L Predator Impact Gloves — Large | SKU: PD4971L | ID: 8747244355672 --\u003e\n\n\u003cp\u003eFor Large-handed industrial mechanics and construction professionals requiring TPR knuckle and dorsal impact protection combined with synthetic leather grip durability, the \u003cstrong\u003eMCR Safety PD4971L Predator Impact Gloves in Large (\u003cstrong\u003eSKU: PD4971L\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4971's Predator series protection for 9–10-inch hand circumferences. The PD4971 series provides the reinforced TPR architecture of the Predator platform in a synthetic leather and spandex mechanics glove optimized for the combined grip and protection demands of daily mechanical and construction work.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Large — fits hand circumference approximately 9–10 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4971)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4971 series is positioned within the Predator lineup for industrial mechanics and construction tradespeople whose work requires reliable dorsal hand protection across the full shift. The TPR guard system covers the knuckle and extended dorsal surface, providing energy absorption for both acute impact events and the cumulative low-energy contact impacts that are inherent to daily mechanical work in tight spaces and on construction sites.\u003c\/p\u003e\n\n\u003cp\u003eThe Large format of the PD4971L is engineered for workers with 9–10-inch hand circumferences. The pattern dimensions ensure TPR guards are positioned at the correct anatomical knuckle locations for Large hands, and the synthetic leather palm panels provide complete coverage from heel to finger bases. This size-specific engineering is the foundation of the Predator series' protection effectiveness — guards that are correctly positioned protect; guards that are shifted by incorrect sizing do not.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial plant maintenance applications, the PD4971L provides protection for the overhead, confined-space, and reach-in work patterns that place the dorsal hand surface at impact risk from equipment structures. Industrial maintenance mechanics routinely work in positions where visibility of the hand's position is limited, making passive dorsal protection from TPR guards essential for preventing the unwitnessed knuckle and dorsal contact events that accumulate into chronic hand injury.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD4971L provides the oil resistance and abrasion durability needed for industrial maintenance work involving lubricated components, hydraulic equipment, and rough structural materials. The consistent grip of synthetic leather on oil-contaminated tool handles and component surfaces reduces the hand force required for secure tool control, decreasing fatigue during extended-shift mechanical work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — structural framing and ironwork\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure maintenance\u003c\/li\u003e\n  \u003cli\u003eGeneral manufacturing with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4971L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747244355672\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eLarge (hand circumference 9–10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4971)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4971L fits Large hands with a circumference of approximately 9–10 inches. The glove is patterned to Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4971 appropriate for industrial plant maintenance?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4971L is well-suited for plant maintenance mechanics whose work involves confined-space component access, overhead operations, and equipment structure contact that creates dorsal hand impact exposure. The TPR coverage and synthetic leather construction address the combined protection and grip requirements of this role.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4971 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4971 series is available from Small through XX-Large, covering the primary hand size range for industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD4971 compare to the Predator PD2901 for mechanical assembly?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD2901 adds individual finger TPR guards for environments with frequent finger-specific impact from precision assembly and fastener handling. The PD4971 provides knuckle and dorsal coverage for environments where dorsal hand protection is the primary requirement. For heavy mechanics with dorsal impact as the main hazard, the PD4971 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, when seams separate, or after significant impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024450678872,"sku":"'PD4971L","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/123477__69948.1738178239_0218e47f-c102-425a-8b5e-776f7a853b7d.jpg?v=1777009177"},{"product_id":"mcr-safety-pd4971xl-predator-impact-gloves-x-large","title":"MCR Safety PD4971XL Predator Impact Gloves — X-Large","description":"\u003c!-- Title: MCR Safety PD4971XL Predator Impact Gloves — X-Large | SKU: PD4971XL | ID: 8747245437016 --\u003e\n\n\u003cp\u003eFor X-Large-handed industrial mechanics and construction professionals requiring TPR knuckle and dorsal impact protection combined with synthetic leather grip durability, the \u003cstrong\u003eMCR Safety PD4971XL Predator Impact Gloves in X-Large (\u003cstrong\u003eSKU: PD4971XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4971's Predator series protection for 10–11-inch hand circumferences. The PD4971 series provides the reinforced TPR architecture of the Predator platform in a synthetic leather and spandex mechanics glove optimized for the combined grip and protection demands of daily mechanical and construction work.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: X-Large — fits hand circumference approximately 10–11 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4971)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4971 series is positioned within the Predator lineup for industrial mechanics and construction tradespeople whose work requires reliable dorsal hand protection across the full shift. The TPR guard system covers the knuckle and extended dorsal surface, providing energy absorption for both acute impact events and the cumulative low-energy contact impacts that are inherent to daily mechanical work in tight spaces and on construction sites.\u003c\/p\u003e\n\n\u003cp\u003eThe X-Large format of the PD4971XL is engineered for workers with 10–11-inch hand circumferences. The pattern dimensions ensure TPR guards are positioned at the correct anatomical knuckle locations for X-Large hands, and the synthetic leather palm panels provide complete coverage from heel to finger bases. This size-specific engineering is the foundation of the Predator series' protection effectiveness — guards that are correctly positioned protect; guards that are shifted by incorrect sizing do not.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial plant maintenance applications, the PD4971XL provides protection for the overhead, confined-space, and reach-in work patterns that place the dorsal hand surface at impact risk from equipment structures. Industrial maintenance mechanics routinely work in positions where visibility of the hand's position is limited, making passive dorsal protection from TPR guards essential for preventing the unwitnessed knuckle and dorsal contact events that accumulate into chronic hand injury.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD4971XL provides the oil resistance and abrasion durability needed for industrial maintenance work involving lubricated components, hydraulic equipment, and rough structural materials. The consistent grip of synthetic leather on oil-contaminated tool handles and component surfaces reduces the hand force required for secure tool control, decreasing fatigue during extended-shift mechanical work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — structural framing and ironwork\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure maintenance\u003c\/li\u003e\n  \u003cli\u003eGeneral manufacturing with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4971XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747245437016\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eX-Large (hand circumference 10–11 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4971)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4971XL fits X-Large hands with a circumference of approximately 10–11 inches. The glove is patterned to X-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4971 appropriate for industrial plant maintenance?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4971XL is well-suited for plant maintenance mechanics whose work involves confined-space component access, overhead operations, and equipment structure contact that creates dorsal hand impact exposure. The TPR coverage and synthetic leather construction address the combined protection and grip requirements of this role.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4971 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4971 series is available from Small through XX-Large, covering the primary hand size range for industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD4971 compare to the Predator PD2901 for mechanical assembly?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD2901 adds individual finger TPR guards for environments with frequent finger-specific impact from precision assembly and fastener handling. The PD4971 provides knuckle and dorsal coverage for environments where dorsal hand protection is the primary requirement. For heavy mechanics with dorsal impact as the main hazard, the PD4971 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, when seams separate, or after significant impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024453890136,"sku":"'PD4971XL","price":26.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/123477__69948.1738178239_660eb2e9-59f9-44bf-ae6b-3c55fa59b21b.jpg?v=1777009193"},{"product_id":"mcr-safety-pd49712xl-predator-impact-gloves-xx-large","title":"MCR Safety PD49712XL Predator Impact Gloves — XX-Large","description":"\u003c!-- Title: MCR Safety PD49712XL Predator Impact Gloves — XX-Large | SKU: PD49712XL | ID: 8747246092376 --\u003e\n\n\u003cp\u003eFor XX-Large-handed industrial mechanics and construction professionals requiring TPR knuckle and dorsal impact protection combined with synthetic leather grip durability, the \u003cstrong\u003eMCR Safety PD49712XL Predator Impact Gloves in XX-Large (\u003cstrong\u003eSKU: PD49712XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4971's Predator series protection for 11–12-inch hand circumferences. The PD4971 series provides the reinforced TPR architecture of the Predator platform in a synthetic leather and spandex mechanics glove optimized for the combined grip and protection demands of daily mechanical and construction work.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XX-Large — fits hand circumference approximately 11–12 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4971)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4971 series is positioned within the Predator lineup for industrial mechanics and construction tradespeople whose work requires reliable dorsal hand protection across the full shift. The TPR guard system covers the knuckle and extended dorsal surface, providing energy absorption for both acute impact events and the cumulative low-energy contact impacts that are inherent to daily mechanical work in tight spaces and on construction sites.\u003c\/p\u003e\n\n\u003cp\u003eThe XX-Large format of the PD49712XL is engineered for workers with 11–12-inch hand circumferences. The pattern dimensions ensure TPR guards are positioned at the correct anatomical knuckle locations for XX-Large hands, and the synthetic leather palm panels provide complete coverage from heel to finger bases. This size-specific engineering is the foundation of the Predator series' protection effectiveness — guards that are correctly positioned protect; guards that are shifted by incorrect sizing do not.\u003c\/p\u003e\n\n\u003cp\u003eIn industrial plant maintenance applications, the PD49712XL provides protection for the overhead, confined-space, and reach-in work patterns that place the dorsal hand surface at impact risk from equipment structures. Industrial maintenance mechanics routinely work in positions where visibility of the hand's position is limited, making passive dorsal protection from TPR guards essential for preventing the unwitnessed knuckle and dorsal contact events that accumulate into chronic hand injury.\u003c\/p\u003e\n\n\u003cp\u003eThe synthetic leather palm of the PD49712XL provides the oil resistance and abrasion durability needed for industrial maintenance work involving lubricated components, hydraulic equipment, and rough structural materials. The consistent grip of synthetic leather on oil-contaminated tool handles and component surfaces reduces the hand force required for secure tool control, decreasing fatigue during extended-shift mechanical work.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial plant maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — structural framing and ironwork\u003c\/li\u003e\n  \u003cli\u003eEquipment maintenance — heavy machinery and mobile equipment\u003c\/li\u003e\n  \u003cli\u003eUtility and infrastructure maintenance\u003c\/li\u003e\n  \u003cli\u003eGeneral manufacturing with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD49712XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747246092376\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXX-Large (hand circumference 11–12 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4971)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49712XL fits XX-Large hands with a circumference of approximately 11–12 inches. The glove is patterned to XX-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4971 appropriate for industrial plant maintenance?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD49712XL is well-suited for plant maintenance mechanics whose work involves confined-space component access, overhead operations, and equipment structure contact that creates dorsal hand impact exposure. The TPR coverage and synthetic leather construction address the combined protection and grip requirements of this role.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4971 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4971 series is available from Small through XX-Large, covering the primary hand size range for industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD4971 compare to the Predator PD2901 for mechanical assembly?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD2901 adds individual finger TPR guards for environments with frequent finger-specific impact from precision assembly and fastener handling. The PD4971 provides knuckle and dorsal coverage for environments where dorsal hand protection is the primary requirement. For heavy mechanics with dorsal impact as the main hazard, the PD4971 is the appropriate specification.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when the palm shows wear through or reduced grip performance, when seams separate, or after significant impact events.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024456773720,"sku":"'PD49712XL","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/123477__69948.1738178239_0c066435-0541-4ca4-bc3f-d6e87fa4f82e.jpg?v=1777009208"},{"product_id":"mcr-safety-pd4903s-predator-impact-gloves-small","title":"MCR Safety PD4903S Predator Impact Gloves — Small","description":"\u003c!-- Title: MCR Safety PD4903S Predator Impact Gloves — Small | SKU: PD4903S | ID: 8747246551128 --\u003e\n\n\u003cp\u003eFor Small-handed workers in mechanical assembly, automotive service, and industrial operations requiring knuckle and dorsal hand impact protection with synthetic leather grip, the \u003cstrong\u003eMCR Safety PD4903S Predator Impact Gloves in Small (\u003cstrong\u003eSKU: PD4903S\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4903's reinforced TPR protection for 7–8-inch hand circumferences. The PD4903 series provides the Predator platform's core impact protection with the synthetic leather and spandex construction appropriate for the full shift demands of mechanical work environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Small — fits hand circumference approximately 7–8 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4903)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4903 series provides reliable dorsal hand protection for the industrial mechanic and automotive service technician whose work creates consistent knuckle and dorsal impact exposure. The TPR guard system addresses the most common impact mechanisms in these roles: ratchet and wrench slip that contacts the knuckle row, tool drop that contacts the dorsal surface, and the continuous incidental contact with equipment structures during confined-space and reach-in maintenance work.\u003c\/p\u003e\n\n\u003cp\u003eFor Small-handed workers specifically, the PD4903S provides properly scaled protection for the 7–8-inch hand geometry. The synthetic leather palm panels cover the full grip surface from palm heel to finger bases without excess material that would reduce grip sensitivity, and the TPR guards are positioned over the knuckle anatomy of Small hands for maximum protection effectiveness.\u003c\/p\u003e\n\n\u003cp\u003eIn automotive service departments, the PD4903S provides the protection level appropriate for engine, drivetrain, and suspension work where impact from ratchet slip, socket drop, and spring-loaded component release is a consistent daily risk. The synthetic leather palm handles the oil and fluid exposure inherent to automotive mechanical work, maintaining grip performance throughout the service shift.\u003c\/p\u003e\n\n\u003cp\u003eFor construction and general industrial work, the PD4903S addresses the combined grip and impact requirements of these environments — rough material handling, heavy tool use, and structural contact that characterize construction and maintenance operations. The hook-and-loop wrist closure keeps the glove securely positioned during high-torque operations.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive service — engine, drivetrain, and suspension repair\u003c\/li\u003e\n  \u003cli\u003eIndustrial equipment maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — general labor and structural work\u003c\/li\u003e\n  \u003cli\u003eHVAC and plumbing installation with tool impact risk\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction equipment maintenance\u003c\/li\u003e\n  \u003cli\u003eManufacturing assembly with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4903S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747246551128\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eSmall (hand circumference 7–8 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4903)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4903S fits Small hands with a circumference of approximately 7–8 inches. The glove is patterned to Small-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4903 appropriate for automotive service work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4903S is appropriate for automotive service department PPE programs for engine and drivetrain work categories. The synthetic leather palm handles oil and fluid exposure, and the TPR dorsal coverage addresses the ratchet slip and tool drop impact risks common in automotive service.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4903 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4903 series is available from Small through XXX-Large, covering the full range of hand sizes in automotive and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the synthetic leather perform compared to natural leather in mechanic work?\u003c\/dt\u003e\n  \u003cdd\u003eSynthetic leather resists petroleum-based fluid absorption, maintaining consistent flexibility and grip throughout its service life. Natural leather absorbs oil and can stiffen with repeated fluid exposure. For mechanics work with regular oil and fluid contact, synthetic leather provides better longevity.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when palm leather shows wear through or significantly reduced grip, when seams separate, or after any significant documented impact event.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024458674264,"sku":"'PD4903S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/33054__32474.1738178225.jpg?v=1777009225"},{"product_id":"mcr-safety-pd4903m-predator-impact-gloves-medium","title":"MCR Safety PD4903M Predator Impact Gloves — Medium","description":"\u003c!-- Title: MCR Safety PD4903M Predator Impact Gloves — Medium | SKU: PD4903M | ID: 8747247272024 --\u003e\n\n\u003cp\u003eFor Medium-handed workers in mechanical assembly, automotive service, and industrial operations requiring knuckle and dorsal hand impact protection with synthetic leather grip, the \u003cstrong\u003eMCR Safety PD4903M Predator Impact Gloves in Medium (\u003cstrong\u003eSKU: PD4903M\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4903's reinforced TPR protection for 8–9-inch hand circumferences. The PD4903 series provides the Predator platform's core impact protection with the synthetic leather and spandex construction appropriate for the full shift demands of mechanical work environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Medium — fits hand circumference approximately 8–9 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4903)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4903 series provides reliable dorsal hand protection for the industrial mechanic and automotive service technician whose work creates consistent knuckle and dorsal impact exposure. The TPR guard system addresses the most common impact mechanisms in these roles: ratchet and wrench slip that contacts the knuckle row, tool drop that contacts the dorsal surface, and the continuous incidental contact with equipment structures during confined-space and reach-in maintenance work.\u003c\/p\u003e\n\n\u003cp\u003eFor Medium-handed workers specifically, the PD4903M provides properly scaled protection for the 8–9-inch hand geometry. The synthetic leather palm panels cover the full grip surface from palm heel to finger bases without excess material that would reduce grip sensitivity, and the TPR guards are positioned over the knuckle anatomy of Medium hands for maximum protection effectiveness.\u003c\/p\u003e\n\n\u003cp\u003eIn automotive service departments, the PD4903M provides the protection level appropriate for engine, drivetrain, and suspension work where impact from ratchet slip, socket drop, and spring-loaded component release is a consistent daily risk. The synthetic leather palm handles the oil and fluid exposure inherent to automotive mechanical work, maintaining grip performance throughout the service shift.\u003c\/p\u003e\n\n\u003cp\u003eFor construction and general industrial work, the PD4903M addresses the combined grip and impact requirements of these environments — rough material handling, heavy tool use, and structural contact that characterize construction and maintenance operations. The hook-and-loop wrist closure keeps the glove securely positioned during high-torque operations.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive service — engine, drivetrain, and suspension repair\u003c\/li\u003e\n  \u003cli\u003eIndustrial equipment maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — general labor and structural work\u003c\/li\u003e\n  \u003cli\u003eHVAC and plumbing installation with tool impact risk\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction equipment maintenance\u003c\/li\u003e\n  \u003cli\u003eManufacturing assembly with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4903M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747247272024\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eMedium (hand circumference 8–9 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4903)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4903M fits Medium hands with a circumference of approximately 8–9 inches. The glove is patterned to Medium-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4903 appropriate for automotive service work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4903M is appropriate for automotive service department PPE programs for engine and drivetrain work categories. The synthetic leather palm handles oil and fluid exposure, and the TPR dorsal coverage addresses the ratchet slip and tool drop impact risks common in automotive service.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4903 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4903 series is available from Small through XXX-Large, covering the full range of hand sizes in automotive and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the synthetic leather perform compared to natural leather in mechanic work?\u003c\/dt\u003e\n  \u003cdd\u003eSynthetic leather resists petroleum-based fluid absorption, maintaining consistent flexibility and grip throughout its service life. Natural leather absorbs oil and can stiffen with repeated fluid exposure. For mechanics work with regular oil and fluid contact, synthetic leather provides better longevity.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when palm leather shows wear through or significantly reduced grip, when seams separate, or after any significant documented impact event.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024462114904,"sku":"'PD4903M","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/33054__32474.1738178225_8a985895-4be8-41f7-9591-90a42c1ce29d.jpg?v=1777009242"},{"product_id":"mcr-safety-pd4903l-predator-impact-gloves-large","title":"MCR Safety PD4903L Predator Impact Gloves — Large","description":"\u003c!-- Title: MCR Safety PD4903L Predator Impact Gloves — Large | SKU: PD4903L | ID: 8747247992920 --\u003e\n\n\u003cp\u003eFor Large-handed workers in mechanical assembly, automotive service, and industrial operations requiring knuckle and dorsal hand impact protection with synthetic leather grip, the \u003cstrong\u003eMCR Safety PD4903L Predator Impact Gloves in Large (\u003cstrong\u003eSKU: PD4903L\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4903's reinforced TPR protection for 9–10-inch hand circumferences. The PD4903 series provides the Predator platform's core impact protection with the synthetic leather and spandex construction appropriate for the full shift demands of mechanical work environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: Large — fits hand circumference approximately 9–10 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4903)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4903 series provides reliable dorsal hand protection for the industrial mechanic and automotive service technician whose work creates consistent knuckle and dorsal impact exposure. The TPR guard system addresses the most common impact mechanisms in these roles: ratchet and wrench slip that contacts the knuckle row, tool drop that contacts the dorsal surface, and the continuous incidental contact with equipment structures during confined-space and reach-in maintenance work.\u003c\/p\u003e\n\n\u003cp\u003eFor Large-handed workers specifically, the PD4903L provides properly scaled protection for the 9–10-inch hand geometry. The synthetic leather palm panels cover the full grip surface from palm heel to finger bases without excess material that would reduce grip sensitivity, and the TPR guards are positioned over the knuckle anatomy of Large hands for maximum protection effectiveness.\u003c\/p\u003e\n\n\u003cp\u003eIn automotive service departments, the PD4903L provides the protection level appropriate for engine, drivetrain, and suspension work where impact from ratchet slip, socket drop, and spring-loaded component release is a consistent daily risk. The synthetic leather palm handles the oil and fluid exposure inherent to automotive mechanical work, maintaining grip performance throughout the service shift.\u003c\/p\u003e\n\n\u003cp\u003eFor construction and general industrial work, the PD4903L addresses the combined grip and impact requirements of these environments — rough material handling, heavy tool use, and structural contact that characterize construction and maintenance operations. The hook-and-loop wrist closure keeps the glove securely positioned during high-torque operations.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive service — engine, drivetrain, and suspension repair\u003c\/li\u003e\n  \u003cli\u003eIndustrial equipment maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — general labor and structural work\u003c\/li\u003e\n  \u003cli\u003eHVAC and plumbing installation with tool impact risk\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction equipment maintenance\u003c\/li\u003e\n  \u003cli\u003eManufacturing assembly with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4903L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747247992920\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eLarge (hand circumference 9–10 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4903)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4903L fits Large hands with a circumference of approximately 9–10 inches. The glove is patterned to Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4903 appropriate for automotive service work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4903L is appropriate for automotive service department PPE programs for engine and drivetrain work categories. The synthetic leather palm handles oil and fluid exposure, and the TPR dorsal coverage addresses the ratchet slip and tool drop impact risks common in automotive service.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4903 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4903 series is available from Small through XXX-Large, covering the full range of hand sizes in automotive and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the synthetic leather perform compared to natural leather in mechanic work?\u003c\/dt\u003e\n  \u003cdd\u003eSynthetic leather resists petroleum-based fluid absorption, maintaining consistent flexibility and grip throughout its service life. Natural leather absorbs oil and can stiffen with repeated fluid exposure. For mechanics work with regular oil and fluid contact, synthetic leather provides better longevity.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when palm leather shows wear through or significantly reduced grip, when seams separate, or after any significant documented impact event.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024465227864,"sku":"'PD4903L","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/33054__32474.1738178225_dccd8179-697f-4922-8e37-2ee4971d4c0f.jpg?v=1777009257"},{"product_id":"mcr-safety-pd4903xl-predator-impact-gloves-xxx-large","title":"MCR Safety PD4903XL Predator Impact Gloves — XXX-Large","description":"\u003c!-- Title: MCR Safety PD4903XL Predator Impact Gloves — XXX-Large | SKU: PD4903XL | ID: 8747248812120 --\u003e\n\n\u003cp\u003eFor XXX-Large-handed workers in mechanical assembly, automotive service, and industrial operations requiring knuckle and dorsal hand impact protection with synthetic leather grip, the \u003cstrong\u003eMCR Safety PD4903XL Predator Impact Gloves in XXX-Large (\u003cstrong\u003eSKU: PD4903XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4903's reinforced TPR protection for 12–13-inch hand circumferences. The PD4903 series provides the Predator platform's core impact protection with the synthetic leather and spandex construction appropriate for the full shift demands of mechanical work environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XXX-Large — fits hand circumference approximately 12–13 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4903)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4903 series provides reliable dorsal hand protection for the industrial mechanic and automotive service technician whose work creates consistent knuckle and dorsal impact exposure. The TPR guard system addresses the most common impact mechanisms in these roles: ratchet and wrench slip that contacts the knuckle row, tool drop that contacts the dorsal surface, and the continuous incidental contact with equipment structures during confined-space and reach-in maintenance work.\u003c\/p\u003e\n\n\u003cp\u003eFor XXX-Large-handed workers specifically, the PD4903XL provides properly scaled protection for the 12–13-inch hand geometry. The synthetic leather palm panels cover the full grip surface from palm heel to finger bases without excess material that would reduce grip sensitivity, and the TPR guards are positioned over the knuckle anatomy of XXX-Large hands for maximum protection effectiveness.\u003c\/p\u003e\n\n\u003cp\u003eIn automotive service departments, the PD4903XL provides the protection level appropriate for engine, drivetrain, and suspension work where impact from ratchet slip, socket drop, and spring-loaded component release is a consistent daily risk. The synthetic leather palm handles the oil and fluid exposure inherent to automotive mechanical work, maintaining grip performance throughout the service shift.\u003c\/p\u003e\n\n\u003cp\u003eFor construction and general industrial work, the PD4903XL addresses the combined grip and impact requirements of these environments — rough material handling, heavy tool use, and structural contact that characterize construction and maintenance operations. The hook-and-loop wrist closure keeps the glove securely positioned during high-torque operations.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive service — engine, drivetrain, and suspension repair\u003c\/li\u003e\n  \u003cli\u003eIndustrial equipment maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — general labor and structural work\u003c\/li\u003e\n  \u003cli\u003eHVAC and plumbing installation with tool impact risk\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction equipment maintenance\u003c\/li\u003e\n  \u003cli\u003eManufacturing assembly with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD4903XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747248812120\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXXX-Large (hand circumference 12–13 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4903)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4903XL fits XXX-Large hands with a circumference of approximately 12–13 inches. The glove is patterned to XXX-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4903 appropriate for automotive service work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD4903XL is appropriate for automotive service department PPE programs for engine and drivetrain work categories. The synthetic leather palm handles oil and fluid exposure, and the TPR dorsal coverage addresses the ratchet slip and tool drop impact risks common in automotive service.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4903 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4903 series is available from Small through XXX-Large, covering the full range of hand sizes in automotive and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the synthetic leather perform compared to natural leather in mechanic work?\u003c\/dt\u003e\n  \u003cdd\u003eSynthetic leather resists petroleum-based fluid absorption, maintaining consistent flexibility and grip throughout its service life. Natural leather absorbs oil and can stiffen with repeated fluid exposure. For mechanics work with regular oil and fluid contact, synthetic leather provides better longevity.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when palm leather shows wear through or significantly reduced grip, when seams separate, or after any significant documented impact event.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024468373592,"sku":"'PD4903XL","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/33054__32474.1738178225_f7915ba0-30a7-4590-ad38-d92b16080abd.jpg?v=1777009274"},{"product_id":"mcr-safety-pd49032xl-predator-impact-gloves-xx-large","title":"MCR Safety PD49032XL Predator Impact Gloves — XX-Large","description":"\u003c!-- Title: MCR Safety PD49032XL Predator Impact Gloves — XX-Large | SKU: PD49032XL | ID: 8747249565784 --\u003e\n\n\u003cp\u003eFor XX-Large-handed workers in mechanical assembly, automotive service, and industrial operations requiring knuckle and dorsal hand impact protection with synthetic leather grip, the \u003cstrong\u003eMCR Safety PD49032XL Predator Impact Gloves in XX-Large (\u003cstrong\u003eSKU: PD49032XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4903's reinforced TPR protection for 11–12-inch hand circumferences. The PD4903 series provides the Predator platform's core impact protection with the synthetic leather and spandex construction appropriate for the full shift demands of mechanical work environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XX-Large — fits hand circumference approximately 11–12 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4903)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4903 series provides reliable dorsal hand protection for the industrial mechanic and automotive service technician whose work creates consistent knuckle and dorsal impact exposure. The TPR guard system addresses the most common impact mechanisms in these roles: ratchet and wrench slip that contacts the knuckle row, tool drop that contacts the dorsal surface, and the continuous incidental contact with equipment structures during confined-space and reach-in maintenance work.\u003c\/p\u003e\n\n\u003cp\u003eFor XX-Large-handed workers specifically, the PD49032XL provides properly scaled protection for the 11–12-inch hand geometry. The synthetic leather palm panels cover the full grip surface from palm heel to finger bases without excess material that would reduce grip sensitivity, and the TPR guards are positioned over the knuckle anatomy of XX-Large hands for maximum protection effectiveness.\u003c\/p\u003e\n\n\u003cp\u003eIn automotive service departments, the PD49032XL provides the protection level appropriate for engine, drivetrain, and suspension work where impact from ratchet slip, socket drop, and spring-loaded component release is a consistent daily risk. The synthetic leather palm handles the oil and fluid exposure inherent to automotive mechanical work, maintaining grip performance throughout the service shift.\u003c\/p\u003e\n\n\u003cp\u003eFor construction and general industrial work, the PD49032XL addresses the combined grip and impact requirements of these environments — rough material handling, heavy tool use, and structural contact that characterize construction and maintenance operations. The hook-and-loop wrist closure keeps the glove securely positioned during high-torque operations.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive service — engine, drivetrain, and suspension repair\u003c\/li\u003e\n  \u003cli\u003eIndustrial equipment maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — general labor and structural work\u003c\/li\u003e\n  \u003cli\u003eHVAC and plumbing installation with tool impact risk\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction equipment maintenance\u003c\/li\u003e\n  \u003cli\u003eManufacturing assembly with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD49032XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747249565784\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXX-Large (hand circumference 11–12 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4903)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49032XL fits XX-Large hands with a circumference of approximately 11–12 inches. The glove is patterned to XX-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4903 appropriate for automotive service work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD49032XL is appropriate for automotive service department PPE programs for engine and drivetrain work categories. The synthetic leather palm handles oil and fluid exposure, and the TPR dorsal coverage addresses the ratchet slip and tool drop impact risks common in automotive service.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4903 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4903 series is available from Small through XXX-Large, covering the full range of hand sizes in automotive and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the synthetic leather perform compared to natural leather in mechanic work?\u003c\/dt\u003e\n  \u003cdd\u003eSynthetic leather resists petroleum-based fluid absorption, maintaining consistent flexibility and grip throughout its service life. Natural leather absorbs oil and can stiffen with repeated fluid exposure. For mechanics work with regular oil and fluid contact, synthetic leather provides better longevity.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when palm leather shows wear through or significantly reduced grip, when seams separate, or after any significant documented impact event.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024471322712,"sku":"'PD49032XL","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/33054__32474.1738178225_de353366-b6ec-497e-8ce3-8997ab7fadaf.jpg?v=1777009292"},{"product_id":"mcr-safety-pd49033xl-predator-impact-gloves-xxx-large","title":"MCR Safety PD49033XL Predator Impact Gloves — XXX-Large","description":"\u003c!-- Title: MCR Safety PD49033XL Predator Impact Gloves — XXX-Large | SKU: PD49033XL | ID: 8747250090072 --\u003e\n\n\u003cp\u003eFor XXX-Large-handed workers in mechanical assembly, automotive service, and industrial operations requiring knuckle and dorsal hand impact protection with synthetic leather grip, the \u003cstrong\u003eMCR Safety PD49033XL Predator Impact Gloves in XXX-Large (\u003cstrong\u003eSKU: PD49033XL\u003c\/strong\u003e)\u003c\/strong\u003e deliver the PD4903's reinforced TPR protection for 12–13-inch hand circumferences. The PD4903 series provides the Predator platform's core impact protection with the synthetic leather and spandex construction appropriate for the full shift demands of mechanical work environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: XXX-Large — fits hand circumference approximately 12–13 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD4903)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD4903 series provides reliable dorsal hand protection for the industrial mechanic and automotive service technician whose work creates consistent knuckle and dorsal impact exposure. The TPR guard system addresses the most common impact mechanisms in these roles: ratchet and wrench slip that contacts the knuckle row, tool drop that contacts the dorsal surface, and the continuous incidental contact with equipment structures during confined-space and reach-in maintenance work.\u003c\/p\u003e\n\n\u003cp\u003eFor XXX-Large-handed workers specifically, the PD49033XL provides properly scaled protection for the 12–13-inch hand geometry. The synthetic leather palm panels cover the full grip surface from palm heel to finger bases without excess material that would reduce grip sensitivity, and the TPR guards are positioned over the knuckle anatomy of XXX-Large hands for maximum protection effectiveness.\u003c\/p\u003e\n\n\u003cp\u003eIn automotive service departments, the PD49033XL provides the protection level appropriate for engine, drivetrain, and suspension work where impact from ratchet slip, socket drop, and spring-loaded component release is a consistent daily risk. The synthetic leather palm handles the oil and fluid exposure inherent to automotive mechanical work, maintaining grip performance throughout the service shift.\u003c\/p\u003e\n\n\u003cp\u003eFor construction and general industrial work, the PD49033XL addresses the combined grip and impact requirements of these environments — rough material handling, heavy tool use, and structural contact that characterize construction and maintenance operations. The hook-and-loop wrist closure keeps the glove securely positioned during high-torque operations.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive service — engine, drivetrain, and suspension repair\u003c\/li\u003e\n  \u003cli\u003eIndustrial equipment maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eConstruction trades — general labor and structural work\u003c\/li\u003e\n  \u003cli\u003eHVAC and plumbing installation with tool impact risk\u003c\/li\u003e\n  \u003cli\u003eMining and resource extraction equipment maintenance\u003c\/li\u003e\n  \u003cli\u003eManufacturing assembly with impact and grip requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD49033XL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747250090072\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eXXX-Large (hand circumference 12–13 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD4903)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD49033XL fits XXX-Large hands with a circumference of approximately 12–13 inches. The glove is patterned to XXX-Large-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD4903 appropriate for automotive service work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD49033XL is appropriate for automotive service department PPE programs for engine and drivetrain work categories. The synthetic leather palm handles oil and fluid exposure, and the TPR dorsal coverage addresses the ratchet slip and tool drop impact risks common in automotive service.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD4903 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD4903 series is available from Small through XXX-Large, covering the full range of hand sizes in automotive and industrial mechanics workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the synthetic leather perform compared to natural leather in mechanic work?\u003c\/dt\u003e\n  \u003cdd\u003eSynthetic leather resists petroleum-based fluid absorption, maintaining consistent flexibility and grip throughout its service life. Natural leather absorbs oil and can stiffen with repeated fluid exposure. For mechanics work with regular oil and fluid contact, synthetic leather provides better longevity.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhen should the gloves be replaced?\u003c\/dt\u003e\n  \u003cdd\u003eInspect weekly. Replace when palm leather shows wear through or significantly reduced grip, when seams separate, or after any significant documented impact event.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024473518168,"sku":"'PD49033XL","price":17.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/33054__32474.1738178225_e227a921-b253-4040-b4fc-160a875a49b9.jpg?v=1777009308"},{"product_id":"mcr-safety-pd6952xs-predator-impact-gloves-x-small","title":"MCR Safety PD6952XS Predator Impact Gloves — X-Small","description":"\u003c!-- Title: MCR Safety PD6952XS Predator Impact Gloves — X-Small | SKU: PD6952XS | ID: 8747250843736 --\u003e\n\n\u003cp\u003eFor X-Small-handed industrial and construction workers requiring durable knuckle and dorsal hand impact protection with synthetic leather grip performance, the \u003cstrong\u003eMCR Safety PD6952XS Predator Impact Gloves in X-Small (\u003cstrong\u003eSKU: PD6952XS\u003c\/strong\u003e)\u003c\/strong\u003e provide the PD6952's reinforced TPR protection architecture for 6–7-inch hand circumferences. The PD6952 series is part of MCR Safety's Predator impact protection line, engineered for industrial mechanics, construction tradespeople, and equipment maintenance professionals whose daily work creates consistent dorsal hand impact exposure.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTPR knuckle and dorsal guards — reinforced thermoplastic rubber impact protection\u003c\/li\u003e\n  \u003cli\u003eSynthetic Leather — durable, oil-resistant grip for tools and mechanical components\u003c\/li\u003e\n  \u003cli\u003eSpandex back panel — four-way stretch for hand-conforming fit\u003c\/li\u003e\n  \u003cli\u003eSize: X-Small — fits hand circumference approximately 6–7 inches\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop wrist closure — secure, adjustable fit\u003c\/li\u003e\n  \u003cli\u003eSeries: Predator (PD6952)\u003c\/li\u003e\n  \u003cli\u003eBrand: MCR Safety, ISO 9001-certified\u003c\/li\u003e\n  \u003cli\u003eCompliance: ANSI\/ISEA 138 Impact Protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDetailed Description\u003c\/h2\u003e\n\u003cp\u003eThe PD6952 series addresses the impact protection needs of workers in industrial environments where tool use, equipment maintenance, and structural material handling create regular dorsal hand contact with hard surfaces. The TPR guard architecture provides energy absorption for both the acute high-energy impacts from ratchet slip and dropped components and the cumulative low-energy impacts from continuous equipment structure contact during confined-space and overhead maintenance work.\u003c\/p\u003e\n\n\u003cp\u003eFor X-Small-handed workers, the PD6952XS delivers properly scaled protection for the 6–7-inch hand circumference. The X-Small-specific pattern positions TPR guards at the correct anatomical knuckle landmarks and provides synthetic leather palm coverage appropriate for X-Small hand geometry. This scaling precision is what enables the PD6952XS to deliver full protection effectiveness — guards that are positioned correctly over the anatomy they protect, not shifted toward larger or smaller hand dimensions.\u003c\/p\u003e\n\n\u003cp\u003eIn construction and ironwork applications, the PD6952XS provides the combined grip and dorsal protection needed for structural material handling. The synthetic leather palm provides abrasion resistance and grip friction for rebar, structural steel, and connection hardware, while the TPR knuckle and dorsal coverage absorbs impact from the material contact events inherent to these materials. Construction environments also involve significant tool use impact from nail guns, pneumatic tools, and power saws, and the dorsal protection of the PD6952XS addresses the tool-related impact hazards of these operations.\u003c\/p\u003e\n\n\u003cp\u003eThe flexible spandex back panel of the PD6952XS provides four-way stretch that accommodates the full range of hand movements in mechanical and construction work — from tight power grips on wrench handles to open-palm gestures during material placement. The spandex tension is calibrated for the X-Small hand's knuckle geometry, maintaining TPR guard alignment throughout the range of hand motion.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction trades — structural steel, ironwork, and general construction\u003c\/li\u003e\n  \u003cli\u003eIndustrial equipment maintenance — mechanical and hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eAutomotive service — engine and drivetrain work\u003c\/li\u003e\n  \u003cli\u003eMining and heavy industry maintenance\u003c\/li\u003e\n  \u003cli\u003eUtility infrastructure construction and maintenance\u003c\/li\u003e\n  \u003cli\u003eGeneral industrial manufacturing with impact and grip hazards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePD6952XS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct ID\u003c\/td\u003e\n\u003ctd\u003e8747250843736\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eX-Small (hand circumference 6–7 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKnuckle\/Dorsal Protection\u003c\/td\u003e\n\u003ctd\u003eReinforced TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePalm Material\u003c\/td\u003e\n\u003ctd\u003eSynthetic Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBack Material\u003c\/td\u003e\n\u003ctd\u003eSpandex with TPR Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eHook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePredator (PD6952)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMCR Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eANSI\/ISEA 138 Impact Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003ePer pair\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRelated Products\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves\"\u003eImpact Gloves — Knuckle and Dorsal Protection\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMechanics Gloves — Assembly and Precision Work\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eWork Gloves — General Industrial\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/hand-protection\"\u003eMCR Safety — Complete Product Line\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/wcsafety.com\/collections\/heat-resistant-gloves\"\u003eLeather Work Gloves — Full Collection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdl\u003e\n  \u003cdt\u003eWhat hand size does this product fit?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6952XS fits X-Small hands with a circumference of approximately 6–7 inches. The glove is patterned to X-Small-specific dimensions for proper TPR guard alignment and full synthetic leather palm coverage.\u003c\/dd\u003e\n\n  \u003cdt\u003eHow does the PD6952 series serve construction and ironwork applications?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6952's synthetic leather palm provides grip and abrasion resistance for structural steel, rebar, and connection hardware, while the TPR knuckle and dorsal coverage absorbs impact from the material handling and tool use impact events in construction and ironwork. The combination addresses the dual grip and impact hazard profile of structural construction in a single glove.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat is the replacement schedule for daily construction use?\u003c\/dt\u003e\n  \u003cdd\u003eIn daily construction and equipment maintenance, inspect weekly for palm wear, seam separation, and TPR guard delamination. The synthetic leather palm typically shows significant wear after 4–8 weeks of intensive use. Replace when grip performance is reduced or seams begin to separate.\u003c\/dd\u003e\n\n  \u003cdt\u003eWhat other sizes are available in the PD6952 series?\u003c\/dt\u003e\n  \u003cdd\u003eThe PD6952 series is available from X-Small through XXX-Large, covering the full hand size range in construction and industrial workforces.\u003c\/dd\u003e\n\n  \u003cdt\u003eIs the PD6952 appropriate for confined-space maintenance work?\u003c\/dt\u003e\n  \u003cdd\u003eYes. The PD6952XS's flexible spandex back and lightweight mechanics construction allows the hand movement required for confined-space access while the TPR dorsal coverage protects against the structure contact inherent to working in tight equipment spaces.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"MCR Safety","offers":[{"title":"Default Title","offer_id":44024476106840,"sku":"'PD6952XS","price":17.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/1900\/0920\/files\/118282__75750.1738178233.jpg?v=1777009324"}],"url":"https:\/\/wcsafety.com\/collections\/impact-resistant-gloves.oembed?page=3","provider":"WC Safety","version":"1.0","type":"link"}